Full Product List (2230)

50ML GRADE AA WELD SEALANT Used to lock and seal fine threaded nuts, bolts, and studs in a wide variety of applications.
97SC (SAC305) Bar MULTICORE 97SC (SAC305) alloy is designed to be a lead free substitute for tin/lead alloys in most electronics assembly soldering operations.
ABLEBOND 8008NC ABLEBOND 8008NC is a non-conductive snap cure adhesive.
ABLEBOND AAA3300 Self-filleting low modulus adhesive for attaching large die on thin organic substrates.
ABLESTIK 2025D-SF Non-conductive die attach adhesive paste.
Ablestik 6202c Ablestik 6202c is a B-stageable printable paste with low moisture uptake and bleed.
Ablestik 6204A Fast B-stageable printable paste with no die attach cure required. Low outgassing.
Ablestik AAA3320 Ablebond AAA3320 is a self-filleting adhesive for die-to-substrate applications.
ABLESTIK ABLEBOND 2033SC Die attach adhesive is designed for high throughput smart card bonding applications.
ABLESTIK ABLEBOND 958-8C ABLESTIK ABLEBOND 958-8C is an electrically conductive epoxy designed for solder replacement in microelectronic interconnect applications.
ABLESTIK ABLEFILM ECF563 ABLESTIK ABLEFILM ECF563 adhesive provides RF/EMI shielding in bonding microwave substrates into packages.
Ablestik ABLELUX A4502 Non-conductive photocurable adhesive.
Ablestik ABLELUX LA-1UV Non-conductive photocurable adhesive.
Ablestik ABLETHERM 3188 Lid Attach adhesive.
ABLESTIK ABP-8000 ABLESTIK ABP-8000 conductive die attach is desgined for bonding devices where high heat transfer is required. It is recommended for use in the attachment of integrated circuits and components onto metallic leadframes.
ABLESTIK ATB-100 Series (Film) Single layer adhesive film for mother/daughter die stacking applications.
Ablestik ATB-105A Non Conductive DDF: DAX film (5 µm).
Ablestik ATB-105U Non Conductive DDF: DAX (5 µm)
Ablestik ATB-110  Non-conductive die attach film (10 µm).
Ablestik ATB-110US Non Conductive DDF: DAX (10 µm).
Ablestik ATB-120US  Non Conductive DDF: DAX (20 µm).
Ablestik ATB-130US  Non Conductive DDF: DAX (30 µm).
Ablestik ATB-200 Series (Film) Dual layer format. Low warpage adhesive. Excellent wettability.
Ablestik ATB-F100E ABLESTIK ATB-F100E adhesive film is formulated for use in water lamination processes and preform decal.
Ablestik C130 Ablestik C100 series (C115 and C130) conductive die attach films. Ablestik C130 supplied in 30 micro thickness enables leadframe package manufacturers to realize the advantages film-based products have over traditional paste die attach products. Benefits include the elimination of die tilt, the ability to process thinner die and facilitation of greater bondline control all of which allow for improved processability, higher yields and better long-term reliability.
ABLESTIK ICP-3513 ABLESTIK ICP-3513 electrically conductive one component adhesive is designed for use in automated assembly and in-line curing operations.
Ablestik UF8806J Ablestik UF8806J is for large flip chip in package applications. Ultra low alpha emissions.
Ablestik UF8826TI Ablestik UF8826TI is for lead-free packaging, optimized modulus and self-filleting properties.
ACHESON ELECTRODAG 456C conductive coating ACHESON ELECTRODAG 456C conductive coating.
Acheson ELECTRODAG 503 High temperature silver conductive coating
ACHESON ELECTRODAG 5915 ACHESON ELECTRODAG 5915 is a one component, fast cure, electrically conductive isotropic ink designed for bonding surface mount devices to flexible or rigid printed circuits.
Acheson ELECTRODAG 976SSHV Screen printable silver ink for rigid printed circuit boards.
ACHESON ELECTRODAG PF-007 Conductive Ink ACHESON ELECTRODAG PF-007 Conductive Ink
Acheson ELECTRODAG PF-845 Screen printable silver ink for PET film. Excellent flexibility and crease resistance.
ACHESON ELECTRODAG PM-500 Conductive Silver Ink Flexible, printable conductive silver ink.
ACHESON ML25240 Green screen printable ink ACHESON ML25240 Green screen printable ink
ACHESON SS24600 Flexible Non-conductive Coating ACHESON SS24600 is a dispersion of finely divided graphite in a thermoplastic resin that rapidly air dries to form a flexible, non-conductive coating.
Adhesin 33-672A High Quality, Very Fast Setting, Good Water Resistance, Re-tack Capable - FDA 175.105
Adhesin 3738T Bonding Adhesive Water-based, pressure sensitive adhesive
Adhesin 3781 Bonding Adhesive Water-based pressure sensitive adhesive
Adhesin 55-5005 General purpose assembly
Adhesin 55-6007M General purpose assembly
Adhesin 56-0004UV General purpose assembly
Adhesin Vetak 7709T Green General purpose assembly
Adhesin Vetak 7747 General purpose assembly
Adhesin Vetak LAW 8403 Water-based pressure sensitive adhesive
AL6002 Water based adhesive for bonding friction materials
Almeco 730 Liquid additive for sulfuric acid anodizing baths that reduces time, energy consumption, and the amount of refrigeration required for a given anodizing process
Alodine 1001 Conversion Coating Nonflammable, chromic acid based, coating chemical that will produce a chrome conversion coating on aluminum and its alloys.
Alodine 1500 Light Metals Conversion Coating Used to produce a protective coating on aluminum or aluminum alloys.
Alodine 1600 RTU Light Metals Conversion Coating Produces a chromate conversion coating on aluminum and its alloys.
Alodine 600 Light Metals Conversion Coating Used to produce a chromate conversion coating on aluminum and its alloys
Aquadag Water Based Graphite Coating / Additive An aqueous-based colloidal dispersion of ultra-fine graphite
AQUENCE 034-088-050 (5093) General purpose assembly
AQUENCE 034-088-223 (7348H) Acrylic emulsion adhesive designed for general wet-bond laminating of difficult substrates.
AQUENCE 485 Latex sealer for the RV industry.
AQUENCE AV 0880 Sprayable waterborne insulation adhesive.
AQUENCE AV 452A

Outstanding water-based, pressure sensitive adhesive.

AQUENCE AV 5531 General purpose assembly
AQUENCE AV 7584 BLACK Water-based pressure sensitive adhesive
AQUENCE AV 7594 Water-based, pressure sensitive adhesive
AQUENCE AV 7595 Water-based, pressure sensitive adhesive
AQUENCE AV 7597 UL-recognized component (MH28702) laminating adhesive.
AQUENCE AV 7597 Water-based, pressure sensitive adhesive
AQUENCE AV 7598 Water-based, pressure sensitive adhesive
AQUENCE AV 797 General purpose assembly
AQUENCE Catalyst K 1000 Water-based, acid catalyst used to accelerate the crosslinking of specialty emulsion adhesives to create Type I and Type II bonds
AQUENCE CATALYST R 394A Aromatic isocyanate EPI crosslinker
AQUENCE CATALYST R 396 Crosslinker
AQUENCE CD 301G Water-based contact cement
AQUENCE CD 380 Water-based rubber emulsion
AQUENCE CD 380P Water-based rubber emulsion
AQUENCE CG 3130 General purpose assembly
AQUENCE DL 215B Edge or face gluing cross-linkable adhesive
AQUENCE ENV 6135HUV VECTORPATCH General purpose window patch gum
AQUENCE KL 3005 Low viscosity edge glue product
AQUENCE KL 300A Lead one-part RF and hot press product
AQUENCE LA 208A Neutral pH products. Contact TS for appropriate product.
AQUENCE PL 1913 Laminating adhesive.
AQUENCE PL 4100

High performance, heat reactivatable, one-component polyurethane adhesive for tough elastomeric bond applications.

AQUENCE PL 453A Formulated copolymer emulsion adhesive
AQUENCE PL 6100BL Water-based contact adhesive
AQUENCE PS 7648 A formulated pressure sensitive, acrylic emulsion adhesive.
AQUENCE PS 9627 General purpose pressure sensitive acrylic.
AQUENCE WL 0272 General purpose edge and face glue
AQUENCE WL 0294 Vinyl copolymer emulsion adhesive
AQUENCE WL 4019 Versatile, crosslinking adhesive
AQUENCE WL 501A Interior flush door product
AQUENCE WL 5578 Designed for extrusion or wheel application.
AQUENCE WL 5704 General purpose assembly
AQUENCE WL 8112 Water-based wrapping adhesive
BBONDERITE L-GP GP460 AERO AN GENERAL PURPOSE LUBRICANT 150 Anti-seize lubricant containing high purity graphite in petrolatum
Bond-Ply 100
Bonderite 1040 Iron Phosphate Conversion Coating Designed for low temperature spray application to steel surfaces.
Bonderite 3410 Makeup Zinc Phosphate Conversion Coating Formulated for treating mixed production of steel, galvanized steel, aluminum and zinc alloy coated steel.
BONDERITE C-AK 1036 ALKALINE CLEANER Concentrated, highly alkaline, phosphate-free etching cleaner for aluminum
BONDERITE C-AK 1520 ALKALINE CLEANER BONDERITE C-AK 1520 ALKALINE CLEANER Two package, low temperature, liquid cleaner formulated to prepare ferrous, zinc and aluminum surfaces to receive uniform, dense, crystalline conversion coatings.
BONDERITE C-AK 1533A ALKALINE CLEANER Used as makeup, required for bath build-up.
BONDERITE C-AK 1772 ALKALINE CLEANER For heavy duty cleaning of ferrous metals prior to autodeposition
BONDERITE C-AK 2087X ALKALINE CLEANER Liquid cleaner for the removal of lubricants and other drawing compounds
BONDERITE C-AK 2592 ALKALINE CLEANER Cleaner is a blend of inorganic alkaline components which remove moderate to heavy deposits of mill oil from ferrous substrates
BONDERITE C-AK 2819 ALKALINE CLEANER Cleaner is a blend of inorganic alkaline components which remove moderate to heavy deposits of mill oil from ferrous substrates
BONDERITE C-AK 2860 ALKALINE CLEANER For use in immersion process equipment for heavy duty cleaning and oxide removal from ferrous metal surfaces prior to autodeposition
BONDERITE C-AK 2978 ALKALINE CLEANER BONDERITE C-AK 2978 ALKALINE CLEANER is a concentrated, water-based cleaner which contains no volatile hydrocarbons. It is applied by hand wipe or misting in the preclean operation of the automotive assembly line.
BONDERITE C-AK 298 AERO ALKALINE CLEANER High temperature immersion cleaner for aluminum, ideal for cleaning polishing compounds
BONDERITE C-AK 2988 Concentrated cleaner, free of volatile hydrocarbons, was formulated for the effective removal of body sealers, drawing compounds and other soils prior to cleaning and phosphating.
BONDERITE C-AK 305R ALKALINE CLEANER Designed to prepare aluminum, steel, hot-dip galvanized and electrogalvanized steel surfaces.
BONDERITE C-AK 319 Designed to prepare aluminum, steel, electrogalvanized and hot dip galvanized surfaces.
BONDERITE C-AK 319MM ALKALINE CLEANER Single package phosphate free liquid alkaline cleaner specially designed as a multi-metal cleaner.
BONDERITE C-AK 338 ALKALINE CLEANER Powder alkaline cleaner for multimetal sheet and stripline applications.
BONDERITE C-AK 412 ALKALINE CLEANER Mid-temperature solventized spray/immersion cleaner for aluminum
BONDERITE C-AK 4181-L AERO ALKALINE CLEANER Alkaline rust remover
BONDERITE C-AK 4215 NC-LT AERO Non-silicated, non-chromated, mildly alkaline cleaner
BONDERITE C-AK 4338-L AERO ALKALINE CLEANER Alkaline degreaser and rust remover.
BONDERITE C-AK 4355 AERO ALKALINE CLEANER Liquid phosphate-free, non-etching product for cleaning aluminum alloys
BONDERITE C-AK 470 Non-silicated liquid, heavy duty spray cleaner designed for use in spray washing applications for cleaning ferrous metals.
BONDERITE C-AK 5578-L AERO ALKALINE CLEANER Alkaline cleaner and etchant for titanium, columbium and titanium alloys.
BONDERITE C-AK 56 ALKALINE CLEANER Phosphate-free, non-etch alkaline cleaner for aluminiun and other metals
BONDERITE C-AK 5805 AERO ALKALINE CLEANER Alkaline cleaner and brightener.
BONDERITE C-AK 5948-DPM AERO ALKALINE CLEANER Heavy duty alkaline cleaner.
BONDERITE C-AK 5948-DPM THK AERO ALKALINE CLEANER Environmentally advantaged thixotropic, water-based, heavy-duty aircraft cleaner.
BONDERITE C-AK 6751-L AERO ALKALINE CLEANER Liquid alkaline low-temperature cleaner for spray applications.
BONDERITE C-AK 6849 AERO ALKALINE CLEANER Alkaline degreaser.
BONDERITE C-AK 800 ALKALINE CLEANER Liquid alkaline cleaner especially designed for cleaning hard soils on steel galvanized and aluminum surfaces
BONDERITE C-AK 9045-6 AERO ALKALINE CLEANER Water-based carbon remover.
BONDERITE C-AK AIR TEC 23 AERO ALKALINE CLEANER Heavy-duty exterior aircraft cleaner.
BONDERITE C-AK AVIATION AERO ALKALINE CLEANER White granulated alkaline compound formulated for the removal of mill inks, oils, shop soils and other difficult-to-remove soils from aluminum, steel, copper, magnesium, cadmium and nickel alloys.
BONDERITE C-AK EC-202L AERO ALKALINE CLEANER Liquid aluminum etchant cleaner
BONDERITE C-AK LS NP-LT AERO ALKALINE CLEANER Alkaline degreaser.
BONDERITE C-AK MIL-ETCH ALKALINE CLEANER Powder alkaline aluminum etchant
BONDERITE C-AK PRECLEAN 2960 ALKALINE CLEANER BONDERITE C-AK PRECLEAN 2960 ALKALINE CLEANER is a concentrated, water-based cleaner. It is effective in the body shop as well as the in the hand wipe operation of the automotive assembly line.
BONDERITE C-AK VTKL AERO ALKALINE CLEANER Hot tank caustic cleaner for ferrous and titanium alloys.
BONDERITE C-IC 119 ACID CLEANER Acid cleaner for aluminum and aluminum alloys
BONDERITE C-IC 151 DEOXIDIZER Nitric acid based deoxidizer for aluminum
BONDERITE C-IC 2310 AERO ACID DEOXIDIZER Chromium-Free Deoxidizer/Desmutter for Aluminum
BONDERITE C-IC 2595 ACID CLEANER A mildly acidic cleaner specially formulated for cleaning plastic surfaces.
BONDERITE C-IC 2635 PLASTIC CLEANER Phosphate-free acidic cleaner formulated primarily for cleaning of plastic surfaces.
BONDERITE C-IC 3293 ACID CLEANER Acidic cleaner formulated primarily for cleaning plastic surfaces
BONDERITE C-IC 33 AERO ACID DEOXIDIZER Non-flammable phosphoric acid based cleaner, brightener and prepaint conditioner for aluminum
BONDERITE C-IC 4104 AERO ACID CLEANER Acidic compound / deoxidizer
BONDERITE C-IC 4409 AERO ACID CLEANER Inhibited acidic scale remover.
BONDERITE C-IC 7005 ACID CLEANER Cleaner is a blend of inorganic acid components which remove rust and lights mill scale from ferrous substrates
BONDERITE C-IC 7005 ACID DEOXIDIZER Will effectively remove rust, scale and light deposits oil from the surface of metals while destroying corrosion stimulators.
BONDERITE C-IC 7310 ACID CLEANER For removing light rust and oxidation from iron and steel surfaces
BONDERITE C-IC ALDOX V AERO ACID CLEANER Non-chromated deoxidizer and desmutter for aluminum alloys.
BONDERITE C-IC DEOXIDIZER 16R AERO ACID DEOXIDIZER Process primarily utilizes two liquid products: Deoxidizer 6 Makeup and Deoxidizer 16 Replenisher
BONDERITE C-IC DEOXIDIZER 6MU AERO ACID DEOXIDIZER Process primarily utilizes two liquid products: Deoxidizer 6 Makeup and Deoxidizer 16 Replenisher
BONDERITE C-IC HX-357 ACID DEOXIDIZER Sulfuric acid based deoxidizer or controlled etchant for aluminum
BONDERITE C-IC METAL GLO 6 AERO ACID CLEANER Cleaner and conditioner for aluminum aircraft surfaces.
BONDERITE C-IC PURGE 2510 SCALE REMOVER Specialty formulated inhibited acid supplied in liquid form.
BONDERITE C-IC SCALEGON 5 AERO ACID CLEANER Mildly acidic scale conditioner.
BONDERITE C-IC SMUTGO NC AERO ACID CLEANER Non-chromated deoxidizer and desmutter for aluminum alloys.
BONDERITE C-IC SMUTGO NCB AERO ACID CLEANER Non-chromated deoxidizer and desmutter for aluminum alloys.
BONDERITE C-IC WO 1 AERO ACID CLEANER Aircraft liquid acid cleaner and deoxidizer for use on aluminum and aluminum alloys.
BONDERITE C-MC 2253 MAINT. CLEANER BONDERITE C-MC 2253 MAINT. CLEANER is a concentrated blue liquid having a mild aroma formulated to meet the requirements of automotive and other industrial general maintenance cleaning needs.
BONDERITE C-MC 2550 MAINTENANCE CLEANER Solution that is phosphoric acid-based and is specifically formulated for removal of scale from closed stainless steel heat transfer surfaces.
BONDERITE C-MC 3000 MAINTENANCE CLEANER
BONDERITE C-MC 3000 MAINTENANCE CLEANER is a water based, phosphate free, cleaning product designed for the exteriors of trains, cars, lorries, tarpaulin covers and other vehicles.
BONDERITE C-MC 35014 MAINTENANCE CLEANER Concentrated, moderately alkaline liquid formulated to meet the requirements of industrial general maintenance cleaning needs.
BONDERITE C-MC 35050 MAINTENANCE CLEANER BONDERITE C-MC 35050 MAINTENANCE CLEANER alkaline concentrated product designed for steam gun or high pressure manual applications on steel, copper, copper alloys and most plastics.
BONDERITE C-MC 5884 AERO MAINTENANCE CLEANER On-line / off-line jet engine compressor cleaner.
BONDERITE C-MC 6783-10 AERO MAINTENANCE CLEANER Environmentally advantaged (EA), ready-to-use, on-line / off-line jet engine compressor cleaner.
BONDERITE C-MC 6783-50 AERO MAINTENANCE CLEANER Environmentally advantaged (EA), ready-to-use, on-line / off-line jet engine compressor cleaner.
BONDERITE C-MC 6802 AERO MAINTENANCE CLEANER A clear amber liquid developed to remove platter’s wax remover.
BONDERITE C-MC A-200 Concentrated, acidic liquid. It is especially designed to clean and prepare spray stages.
BONDERITE C-MC LAVOXYD MAINTENANCE CLEANER
BONDERITE C-MC LAVOXYD MAINTENANCE CLEANER, is a foaming acid cleaner that has been specially developed for cleaning the exterior of railroad cars, busses, and tank wagons.
BONDERITE C-MC STC 104 MAINTENANCE CLEANER General maintenance cleaner
BONDERITE C-NE 200 NEUTRAL CLEANER Neutral-based in-process cleaner with corrosion inhibitors designed for in-process corrosion protection on ferrous and aluminum alloys.
BONDERITE C-NE 5088 Neutral Cleaner Moderate temperature multi-metal neutral cleaner with RP
BONDERITE C-NE 5156 Neutral Cleaner A neutral cleaner applied on ferrous substrates.
BONDERITE C-NE 5175 NEUTRAL CLEANER Moderate temperature neutral cleaner for ferrous metals
BONDERITE C-NE 5220-1 Builder Free Neutral Cleaner Neutral cleaner suitable for all metal types including copper
BONDERITE C-NE C64 NEUTRAL CLEANER A water-soluble emulsion cleaner and rust inhibitor.
BONDERITE C-SO 283 Blended solvents
BONDERITE C-SO 307 SOLVENT CLEANER Purge solvent, solvent, cleaner
BONDERITE C-SO 577 WB WATER BORNE SOLVENT Purge solvent, waterbased cleaner
BONDERITE C-SO PAINT 200 SOLVENT PAINT LINE CLEANER Water-based, paint line cleaner
BONDERITE L-AD S LUBRICANT ADDITIVE Machine system cleaner for industrial applications
BONDERITE L-FG 151 FORGING LUBRICANT ACHESON Glass Coating for High Temperature Forging
BONDERITE L-FG 153 FORGING LUBRICANT ACHESON Glass Coating for High Temperature Forging
BONDERITE L-FG 345 Graphite Forging Lubricant Acheson Water soluble semi-synthetic lubricant used for hot forging steel parts
BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON Water dilute-able lubricant used when hot forging steel parts
BONDERITE L-FG 658 ACHESON high performance, water-based, die lubricant designed specifically for the hot forging of ferrous metals on presses
BONDERITE L-FG 907B ACHESON water-extendable, graphite/polymer material specifically engineered to combine the operational advantages of oil die lubricants with the cleanliness and safety of water-based lubricants
BONDERITE L-FG F 31 ACHESON world’s most widely used forging die lubricant
BONDERITE L-FG F-42 ACHESON water-based, graphite die lubricant
BONDERITE L-FG F-87 Forging Lubricant Acheson Forging die lubricant
BONDERITE L-FM 2004 FORMING LUBRICANT ACHESON A synthetic compound designed for drawing and stamping of ferrous and aluminum alloys.
BONDERITE L-FM 3015 ACHESON Synthetic lubricant suitable for light machining to tube forming
BONDERITE L-FM 360 BODYMAKER COOLANT ACHESON Biostable bodymaker coolant for drawing and ironing of aluminum beverage cans
BONDERITE L-FM F 1009 FORMING LUBRICANT ACHESON Synthetic lubricant suitable for extreme draws
BONDERITE L-FM F 325 STAMPING LUBRICANT ACHESON A water soluble, biodegradable, synthetic lubricant. Contains no mineral oil, chlorine or sulfur. Excellent for use in tube mills or roll-forming lines running ferrous or non-ferrous materials.
BONDERITE L-FM F 6740 STAMPING LUBRICANT ACHESON A synthetic metal forming lubricant that is used on all metals.
BONDERITE L-FM F 7160 FORMING LUBRICANT ACHESON Light to moderate forming lubricant for all metals including copper
BONDERITE L-FM F 7270 STAMPING LUBRICANT ACHESON BONDERITE L-FM F 7270 STAMPING LUBRICANT ACHESON is a synthetic compound designed for drawing and stamping of ferrous and aluminum alloys.
BONDERITE L-FM F 737 FORMING LUBRICANT ACHESON Non-VOC synthetic forming product
BONDERITE L-FM F 747 STAMPING LUBRICANT ACHESON Synthetic stamping lubricant for deep draws
BONDERITE L-FM F 750 STAMPING LUBRICANT ACHESON Synthetic forming lubricant with EP and polymer additives
BONDERITE L-FM F 927 F STAMPING LUBRICANT ACHESON Heavy duty soluble forming lubricant with EP additives
BONDERITE L-FM F 981 ND FORMING LUBRICANT ACHESON Metal forming soluble oil with EP package
BONDERITE L-FM F 985 STAMPING LUBRICANT ACHESON A metal forming fluid suitable on steel, galvanized, aluminum and stainless applications.
BONDERITE L-FM F B27 MC-1 AN FORMING LUBRICANT OEM approved multi-metal metal forming lubricant
BONDERITE L-FM F B27MC6A STAMPING LUBRICANT ACHESON OEM approved multi-metal metal forming lubricant
BONDERITE L-FM F B27MC6A-HD ACHFORMING LUBRICANT OEM approved high solids multi-metal metal forming lubricant
BONDERITE L-FM F P 1212 AN STAMPING LUBRICANT A paste designed for cold forging, forming, drawing, and bending of ferrous, stainless steel and non-ferrous alloys.
BONDERITE L-FM I-102 BODYMAKER COOLANT ACHESON Biostable bodymaker coolant for drawing and ironing of aluminum beverage cans
BONDERITE L-FM MP-404 STAMPING LUBRICANT ACHESON Mill applied OEM approved drawing lubricant
BONDERITE L-FM PL 101 Forming Lubricant Acheson Multiple OEM approved product for both forming and rust prevention
BONDERITE L-FM PL 1439 STAMPING LUBRICANT ACHESON Low VOC; use with Appli-Coater for light stamping, high speed.
BONDERITE L-FM PL 298 STAMPING LUBRICANT ACHESON High viscosity hydroforming die side lubricant
BONDERITE L-FM PL 633 STAMPING LUBRICANT ACHESON Solvent based forming and stamping lubricant for light applications
BONDERITE L-GP 39SY20 (235 PENT GEAR MARKING COMPOUND) Pigmented lubricant for checking the alignment of matched gear sets
BONDERITE L-GP 4141 Corrosion Inhibitor High flash, low residue rust preventative
BONDERITE L-GP 4232 A short-term rust preventative that can be used at a wide concentration range. It can be used on ferrous and non-ferrous metals and is applied either in a spray or immersion system.
BONDERITE L-GP 501 CORROSION INHIBITOR Synthetic corrosion inhibitor. Rust preventatives
BONDERITE L-GP 503 CONDUCTIVE COATING ACHESON High temperature resistant, silver conductive coating.
BONDERITE L-GP 505 Corrosion Inhibitor In-process RP for ferrous metals
BONDERITE L-GP 5800 Corrosion Inhibitor Soluble oil rust preventative for long term storage
BONDERITE L-GP 6041 CR CORROSION INHIBITOR A solvent-based corrosion inhibitor designed for extended corrosion protection on ferrous and galvanized alloys.
BONDERITE L-GP AQUADAG22% GRAPHITE DISPERSION IN WATER Water based graphite coating/additive.
BONDERITE L-GP AQUASORB AERO GENERAL PURPOSE LUBRICANT Water displacing oil.
BONDERITE L-GP CO-4 CORROSION INHIBITOR ACHESON Heavy duty rust preventive for use on cold rolled, galvanized, and coated steels
BONDERITE L-GP CO-4BH CORROSION INHIBITOR ACHESON Extremely heavy duty rust preventive
BONDERITE L-GP G AEROSOLIZED GRAPHITE LUBRICANT ACHESON Provides a dry film coating which offers superior lubrication and excellent electrical capabilities
BONDERITE L-GP M 210 DRYFILM COATING ACHESON Dry film lubricant
BONDERITE L-GP RUST BLOC AERO LUBRICANT Corrosion preventative rinse additive.
BONDERITE L-GP SN 400C CORROSION INHIBITOR A water-emulsifiable corrosion preventative that is specifically formulated for coating phosphated and painted parts. It contains a special additive system that provides a durable, self-healing, corrosion-resistant film.
BONDERITE L-MR 2140 MACHINING LUBRICANT A non-sulfonate soluble oil that has minimal impact in the presence of bioactivity.
BONDERITE L-MR 2307GT MACHINING LUBRICANT Oil-rejecting true solution synthetic fluid designed for machining, grinding and roll forming ferrous alloys.
BONDERITE L-MR 3105 Machining Coolant High lubricity synthetic multi-metal coolant
BONDERITE L-MR 3107 MACHINING LUBRICANT True solution synthetic fluid designed for ferrous and most non-ferrous alloys.
BONDERITE L-MR 400 MACHINING LUBRICANT Synthetic metal removal and forming fluid
BONDERITE L-MR 5005M MACHINING LUBRICANT A heavy duty soluble oil used in metal removal applications. Its high level of extreme pressure additives make this product suitable for heavy machining operations including broaching. This product is fine for both ferrous and non-ferrous applications.
BONDERITE L-MR 5500 MACHINING LUBRICANT Synthetic coolant used on aviation materials
BONDERITE L-MR 5600D Machining Lubricant High lubricity soluble oil coolant for multi-metal applications
BONDERITE L-MR 6011 MACHINING LUBRICANT A soluble oil designed for machining and grinding ferrous alloys.
BONDERITE L-MR 8304 Machining Lubricant Oil-absorbing true solution synthetic fluid designed for machining and grinding ferrous and aluminum alloys.
BONDERITE L-MR 9103 Machining Lubricant No foam, synthetic grinding lubricant
BONDERITE L-MR B 236 Machining Lubricant A semi-synthetic metal removal fluid for machining and grinding ferrous and non-ferrous alloys.
BONDERITE L-MR B 549 low foam, water soluble, semi-synthetic fluid designed for machining and grinding ferrous and aluminum alloys
BONDERITE L-MR B 583H low foam, water soluble, semi-synthetic fluid designed for machining and grinding ferrous and aluminum alloys
BONDERITE L-MR B-200 SEMI SYNTHETIC COOLANT Bio-resistant semi-synthetic coolant
BONDERITE L-MR B-204 low foam, water soluble semi-synthetic fluid designed for machining and grinding ferrous and aluminum alloys
BONDERITE L-MR B-400 Semi Synthetic Coolant Bio-resistant multi-metal semi-synthetic coolant
BONDERITE L-MR B-414 Semi Synthetic Coolant A semi-synthetic metal removal fluid for machining and grinding ferrous and non-ferrous alloys.
BONDERITE L-MR B-451 SEMI SYNTHETIC COOLANT Bio-resistant high EP semi-synthetic coolant
BONDERITE L-MR CR 10 Machining Lubricant Medium viscosity oil for metal removal
BONDERITE L-MR CR 20 METAL REMOVAL High viscosity oil for metal removal
BONDERITE L-MR CR 26 Metal Removal Lubricant High viscosity oil with EP additive for metal removal
BONDERITE L-MR CR 410 low viscosity, colorless, low odor lubricant used for honing ferrous and non-ferrous metals
BONDERITE L-MR CR 67 Metal Removal Lubricant Low viscosity oil for metal removal
BONDERITE L-MR CR 67IC Metal Removal Medium viscosity oil with EP additive for metal removal
BONDERITE M-AC M POWDERED CONDITIONING AGENT Powdered surface conditioning agent formulated to promote a fine, dense crystalline phosphate coating on iron and steel surfaces.
BONDERITE M-AC ZL LIQUID CONDITIONING AGENT Liquid based surface conditioner designed to promote a refined crystalline structure when in a zinc phosphate coating application.
BONDERITE M-CR 1000 L Used to produce a protective coating on aluminum and aluminum alloys.
BONDERITE M-CR 1200S AERO CHROMATE COATING Aluminum conversion coating process.
BONDERITE M-CR 1200S RTU CHROMATE COATING 55GAL BRUSH Ready-to-use liquid product that produces a chromate conversion coating on aluminum and its alloys.
BONDERITE M-CR 1201 AERO CHROMATE COATING Non-flammable, acid based, chemical coating that produces a protective coating on aluminum and its alloys.
BONDERITE M-CR 1310 CHROMATE TREATMENT Chrome pretreatment for sheet and stripline applications
BONDERITE M-CR 1402W CHROMATE TREATMENT Chrome dried in place pretreatment
BONDERITE M-CR 1430C TRI CHROME TREATMENT Dry-In-Place Conversion Coating
BONDERITE M-CR 1600 AERO CHROMATE COATING Used to produce a chromate conversion coating on aluminum and all its alloys
BONDERITE M-CR 47S Process used to produce a chemical conversion coating on aluminum and its alloys.
BONDERITE M-CR 600RTU AERO CHROMATE COATING Ready-to-use liquid product which produces a chromate conversion coating on aluminum and its alloys.
BONDERITE M-CR 713 Formulated for the treatment of aluminum and its alloys.
BONDERITE M-CR K-702 CHROMATE TREATMENT Chrome prepaint treatment for aluminum applications
BONDERITE M-CR MAGNESIUM AERO CHROMATE COATING Light metals conversion coating formulated for treating magnesium alloys to conform to SAE AMS-M-3171, Type VI
BONDERITE M-CR T 5900 AERO CHROMATE COATING Trivalent chrome conversion coating approved to MIL-DTL-81706/MIL-DTL-5541F Class 1A and 3.
BONDERITE M-CR T 5900 TONER CHROMATE COATING Used to build up the BONDERITE M-CR T 5900 TONER CHROMATE COATING bath
BONDERITE M-CR T5900 RTU AERO CHROMATE COATING Trivalent chrome conversion coating approved to MIL-DTL-81706/MIL-DTL-5541F Class 1A and 3.
BONDERITE M-FE 101 Concentrated liquid product designed for steam gun and high pressure manual applications on steel surfaces for simultaneous cleaning and conversion.
BONDERITE M-FE 1020 IRON PHOSPHATE Formulated for spray and immersion application to steel surfaces.
BONDERITE M-FE 1050 IRON PHOSPHATE Designed for low temperature spray application to steel surfaces.
BONDERITE M-FE 1070 IRON PHOSPHATE Formulated for spray and immersion application to steel, aluminum and zinc surfaces
BONDERITE M-FE 1080 IRON PHOSPHATE Iron phosphate process designed for multi-metal application.
BONDERITE M-FE 1090 IRON PHOSPHATE Conversion coating that inhibits corrosion and increases the adhesion and durability of paint finishes
BONDERITE M-FE 200 IRON PHOSPHATE Designed to clean and impart an iron phosphate conversion coating on aluminum and zinc surfaces.
BONDERITE M-FE 902 IRON PHOSPHATE Iron phosphate pre-treatment for sheet and strip line applications.
BONDERITE M-MN LUBRITE 2 MANGANESE PHOSPHATE Manganese wear resistant coating to permit rapid break-in of metal-metal surfaces.
BONDERITE M-NT 1200 MU A CONVERSION COATING Second generation fluorozirconic nanoceramic for multisubstrate processes
BONDERITE M-NT 1303 NON CHROME TREATMENT Complex oxide pretreatment for hot dip galvanized or electrogalvanized
BONDERITE M-NT 1455 SF NON CHROME TREATMENT Non-chrome dried in place pretreatment
BONDERITE M-NT 1800 CONVERSION COATING Phosphate-free, reactive, ambient spray conversion coating formulated for use in the treatment of steel, zinc and aluminum surfaces.
BONDERITE M-NT 20120 BONDERITE M-NT 20120, next-generation coating, provides robust pretreatment against flash rust
BONDERITE M-NT 2600 MU CR FREE CONVERSION COATING Cobalt-based conversion coating for aluminum.
BONDERITE M-NT 404 CONVERSION COATING Conversion coating process for formed aluminum cans
BONDERITE M-NT 4595 CONVERSION COATING Chromium-free zirconium/polymer product for treating aluminum to provide an excellent base for organic finishes and bonding.
BONDERITE M-NT 5200 MU CR FREE CONVERSION COATING Chromium free product formulated for treating non-ferrous alloys
BONDERITE M-NT 5220 R CR FREE CONVERSION COATING Chrome free light metals conversion coating replenisher
BONDERITE M-NT 5700 CR FREE CONVERSION COATING Ready to use chrome free titanium polymer conversion coating for aluminum
BONDERITE M-NT 5700 WIPES CR FREE CONVERSION COATING Ready-to-use wipes, a version of Alodine 5200
BONDERITE M-NT 7400 Formulated for dry-in-place, conversion coating use on steel, galvanized steel and aluminum.
BONDERITE M-NT 8453 BONDERITE® M-NT 8453™ Chrome Free Conversion Coating
BONDERITE M-NT NF-1 MU ANODIZING SEAL Nickel-free cold seal for anodized aluminum
BONDERITE M-NT NT-1 CONVERSION COATING Electrolytic coloring process for anodized aluminum.
BONDERITE M-NT NT-1 CONVERSION COATING Ambient, nanoceramic, phosphate free conversion coating formulated for use in multi-metal applications.
BONDERITE M-PA 225 W CHROME PASSIVATE Chromate passivate for galvanized steel and galvalume
BONDERITE M-PP 930 Autodeposition Coating For demanding autodeposition applications like frames and chassis components
BONDERITE M-PT 100NC POST TREATMENT Chrome-free post treatment for conversion coated aluminum
BONDERITE M-PT 2150 REACTION RINSE Environmentally friendly seal rinse technology
BONDERITE M-PT 3416 REACTION RINSE Appearance enhancing seal rinse technology
BONDERITE M-PT 7100 POST TREATMENT BONDERITE M-PT 7100 Ready-to-use, patented, chromiumfree, post treatment chemical especially formulated for use over iron phosphate conversion coatings.
BONDERITE M-PT 99 CWN Post Treatment BONDERITE M-PT 99 CWN Chromium-free product specifically formulated as a conversion coating/post-treatment process designed for zinc phosphate lines that process a high percentage of aluminum metal.
BONDERITE M-PT E2 POST TREATMENT Seal rinse technology with enhanced chemical resistance
BONDERITE M-PT E3 REACTION RINSE Seal rinse technology with enhanced corrosion resistance
BONDERITE M-PT R 400 POST TREATMENT Rinse additive for plastics
BONDERITE M-ZN 1421-A ZINC PHOSPHATE Zinc phosphate pretreatment is for sheet and stripline applications.
BONDERITE M-ZN 181X ZINC PHOSPHATE

Conversion coating process for cold forming

BONDERITE M-ZN 198X ZINC PHOSPHATE Conversion coating  process for cold forming
BONDERITE M-ZN 1994 MU ZINC PHOSPHATE Inhibits corrosion and increases the adhesion and durability of electrodeposited finishes
BONDERITE M-ZN 2010 ZINC PHOSPHATE Polycrystalline zinc phosphate conversion coating designed for multi-metal immersion applications.
BONDERITE M-ZN 300X MU ZINC PHOSPHATE Conversion coating process for cold forming
BONDERITE M-ZN 3080 ZINC PHOSPHATE Inhibits corrosion and increases the adhesion and durability of paint finishes
BONDERITE M-ZN 37 ZINC PHOSPHATE Formulated primarily for treating hot-dip galvanized and certain continuous electrogalvanized surfaces which are difficult to coat with other materials.
BONDERITE M-ZN 427 RLK NON CHROME TREATMENT Water-based
BONDERITE M-ZN 4800 MU ZINC PHOSPHATE Oxide conversion coating for hot-dip galvanized or electro-galvanized coating
BONDERITE M-ZN 880 MU ZINC PHOSPHATE Ferrous iron-containing, zinc phosphate process for treating steel surfaces.
BONDERITE M-ZN 910 ZINC PHOSPHATE Formulated for spray application on multi-metal substrates prior to electrocoating.
BONDERITE M-ZN 952 ZINC PHOSPHATE Polycrystalline conversion coating designed for multi-metal spray applications.
BONDERITE M-ZN 958 ZINC PHOSPHATE Polycrystalline conversion coating designed for multi-metal immersion applications.
BONDERITE M-ZN CD-3020 ZINC PHOSPHATE Converts the metal surface to a nonmetallic, polycrystalline coating
BONDERITE M-ZN CD-3042 ZINC PHOSPHATE Zinc phosphating conversion coating chemical
BONDERITE M-ZN ZM-1 ZINC PHOSPHATE Inhibits corrosion and increases the adhesion and durability of organic paints and finishes
BONDERITE O-TO 3000 B-1 CHROMATE COATING Permanent thin organic coating
BONDERITE O-TO 3000 SI CHROME COATING
BONDERITE O-WP ZE WELDABLE PRIMER Zinc rich, weldable primer
BONDERITE S-AD 102 ACID INHIBITOR ADDITIVE BONDERITE S-AD 102 ACID INHIBITOR ADDITIVE is a powdered chemical designed to inhibit the attack of sulfamic and sodium bisulfate solutions on mild steel, stainless steel, copper and/or brass during industrial cleaning operations.
BONDERITE S-AD 103 NPF ACID INHIBITOR ADDITIVE Unique liquid inhibitor designed specifically for use in industrial cleaning operations to prevent acid attack on mild steel, stainless steel and copper or brass
BONDERITE S-AD 213 SF ACID INHIBITOR ADDITIVE Organic, liquid cationic corrosion inhibitor especially desiged to inhibit the attack of hydrochloric acid on iron and steel during industrial cleaning operations.
BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE Low viscosity liquid, non-foaming inhibitor for use in hydrochloric acid continuous or batch type pickling operations.
BONDERITE S-AD HOT 15 PAINT STRIPPER Hot paint stripper for cured paint
BONDERITE S-AD RODINE 2010 ACID INHIBITOR ADDITIVE Low toxicity, nonflammable, highly soluble, low viscosity, liquid metal loss inhibitor for use especially in tetraammoniated ethylenediaminetetraacetic acid (EDTA) cleaning solutions.
BONDERITE S-FN 109 CONDUCTIVE COATING ACHESON Carbon ink for flexographic/rotogravure printing on plastic film (PET, PVC) and paper substrates.
BONDERITE S-FN 309 DRY FILM COATING ACHESON PTFE fluorocarbon resin
BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON Fluoropolymer lubricant coating
BONDERITE S-FN 333 DRYFILM COATING ACHESON High performance fluoropolymer lubricant coating
BONDERITE S-FN 334 DRYFILM COATING ACHESON Resin Bonded Fluoropolymer Lubricant
BONDERITE S-FN 6767 CORROSION INHIBITOR A soluble oil corrosion inhibitor designed for extended corrosion protection on ferrous alloys. Its unique composition provides a durable product for today’s heavy duty corrosion protecting needs. 
BONDERITE S-FN 8301 DRYFILM COATING ACHESON Air dry water borne lubricant coating
BONDERITE S-FN AWS 104 ANTI WELD SPATTER A water based, synthetic, body-in-white anti-weld spatter agent material that stays wet after application.
BONDERITE S-FN M 254 N AN FUNCTIONAL PREVENTAIVE COATING Resin Bonded MoS2 Lubricant Coating
BONDERITE S-MA 2247 OVEN COATING Tacky coating, high temperature, oven, solvent based
BONDERITE S-OT 40 TIRE MOUNTING LUBRICANT ACHESON A water-based, very slightly viscous liquid lubricant for automatic or manual tire mounting operations
BONDERITE S-OT HI-LITE 2495 ACHESON DEFECT HI-LIGHTER Petroleum oil based, body-in-white highlighting material
BONDERITE S-OT HI-LITE 2495 WIP DEFECT HI-LIGHTER Petroleum based sheet metal highlighting aid.
BONDERITE S-ST 1270-6 AERO PAINT STRIPPER Paint stripper for composite substrates on aircraft.
BONDERITE S-ST 16 STRIPPER ADDITIVE BONDERITE S-ST 16 STRIPPER ADDITIVE is an organic, liquid product designed specifically for accelerating paint stripping operations.
BONDERITE S-ST 19 PAINT STRIPPER ADDITIVE Especially formulated for use in highly alkaline solutions to assist in the removal of paint.
BONDERITE S-ST 301 PAINT STRIPPER Solvent paint stripper for removing heavy paint builds from aluminum, steel and various soft metals
BONDERITE S-ST 5668 AERO PAINT STRIPPER Hot tank paint stripper
BONDERITE S-ST 6776 LO AERO PAINT STRIPPER Water-based environmentally advantaged paint remover.
BONDERITE S-ST 6776 THIN AERO PAINT STRIPPER Light amber, diphase liquid developed for removing chemical resistant paints
BONDERITE S-ST 6813E AERO PAINT STRIPPER Water-based environmentally advantaged paint remover.
BONDERITE S-ST 6930 AERO PAINT STRIPPER Environmentally advantaged (EA) hydrogen peroxide activated paint remover.
BONDERITE S-ST HOT 50 PAINT STRIPPER Hot paint stripper for cured paint
BONDERITE S-WT DEFOAMER 2491 WATER TREATMENT Paint detackifier
Bondmaster 40-514A Water-based, pressure sensitive adhesive
Deoxidine 182B Phosphoric acid-based, detergent-type metal cleaner designed to remove rust and oxides left from laser cutting and welding on steel surfaces.
Deoxidine 457 Deoxidine 457 is a non-flammable phosphate-free, surfactant-based cleaner, brightener and pre-paint conditioner for magnesium and aluminum.
Dorus 51-5659UV General purpose assembly
Dorus 56-3173M General-purpose adhesive that can be used to bond a variety of materials
Dorus 92-3200 Catalyst
Dorus KS-217 Designed for use in solid wood edgebanding
Dorus KS-360/3 High heat resistant EVA for edgebanding
Dorus PL1617B Exterior trim and PVC bonding
Dorus PL1630B Exterior trim and PVC bonding
Dorus Q-621 Versatile adhesive for edgebanding
Dorus S 514M A flammable solvent based synthetic elastomeric adhesive for spray application involving a wide variety of porous and non-porous substrates.
Dorus SM-2000 Versatile soft-forming adhesive
Dorus Tancotard TB-408 Decabromodiphenyl oxide and antimony oxide in water.
Dorus US-280/4 Good adhesion to difficult substrates
Euromelt 80-8707 Long open time, general purpose hot melt
Frekote 1450-HS Mold Release Agent Water based mold release solution specifically formulated for use with resin / asbestos products.
Frekote 1711 Mold Release Agent Sacrificial mold release agent offers superb release properties, choice of finish, and excellent part detail to meet your specific molding requirements.
Frekote 44-NC Mold Release Agent Non-CFC release agent for the release of epoxies, polyester resins, thermoplastics, adhesives, and for fiberglass reinforced polyester (FRP) composites
Frekote 48-NC Mold Release Agent Non-CFC release agent designed to provide multiple releases with no contaminating transfer
Frekote 700-NC Mold Release Agent Non-CFC, semi-permanent, multiple release polymer resin that effectively releases all thermoset resins
Frekote 710-LV Mold Release Agent A low VOC Semi-permanent release agent for high performance composite assembly
Frekote 815-NC Mold Release Agent Non-CFC, semi-permanent, multiple release polymer resin designed to form a semi-permanent release interface on mold surfaces with application temperatures from room temperature to 135°C (275°F).
Frekote 915WB Mold Release Cleaner A water based cleaner developed for removing residue from mold surfaces
Frekote Aqualine PUR-100 Mold Release Agent Water-based, semi-permanent release agent for releasing urethane elastomers.
Frekote Aqualine R-100 Mold Release Agent Water-based release agent designed for application to mold surfaces preheated to between 60°C (140°F) and 182°C (360°F).
Frekote Aqualine R-150 Mold Release Agent Water-based mold release agent designed for the more difficult molding applications and for silicone and rubber goods.
Frekote Aqualine R-180 Mold Release Agent Water-based mold release agent for the most difficult molding applications including silicone and rubber goods.
Frekote Aqualine R-220 Mold Release Agent A water based release agent formulated for silicone and rubber goods and the most difficult to release molding applications such as EPDM and HNBR compounds
Frekote Aqualine R-95 Mold Release Agent Water-based mold release agent for easy molding application of rubber goods
Frekote Aqualine RC-321 Mold Release Agent Water dilutable concentrate that provides a durable release film for most rubber molding applications
Frekote Aqualine Rotolease Mold Release Agent Water based mold release agent designed for rotational molding applications
Frekote B-15 Mold Release Sealer Sealer for molds with microporosity problems, small surface scratches or imperfections
Frekote C-200 Mold Release Agent Unique water based release agent designed to provide multiple releases per application with no contaminating transfer.
Frekote C-210 Mold Release Agent Unique water-based release agent with high temperature stability for thermoset composites
Frekote CMR Mold Release Agent Mold release agent designed to dissolve and remove polymer, composite, and other residues from polyester molds without dulling the mold surface.
Frekote CS-122 Mold Release Sealer Frekote CS-122 is designed to form a thick, inert, thermally stable coating that is compatible with most solvent-based Frekote release agents.
Frekote CS-123 Mold Release Sealer Frekote CS-123 is designed to form a thick, inert, thermally stable coating that is compatible with most solvent-based Frekote release agents.
Frekote CUR Mold Release Agent Mold release designed to form a semi-permanent release coating on the mold surface for rigid, cast polyurethane products
Frekote EFR Mold Release Agent Semi-permanent, polymeric release agent for flange sealing on composite molds
Frekote EXITT Mold Release Agent

A sacrificial mold release developed for urethane elastomer systems

Frekote EXITT-EM Mold Release Agent Sacrificial mold release agent for epoxies and urethanes
Frekote FMS-100 Mold Release Sealer Solvent-based sealer specifically formulated for use on FRP, epoxy, or other composite mold surfaces
Frekote LIFFT Mold Release Agent Silicone, solvent based, sacrificial mold release agent offering a high gloss finish with excellent part detail and mold geometry retention.
Frekote PUR-NC Mold Release Agent Non-CFC, semi-permanent, multiple release polymer resin for rigid, cast polyurethane products
Frekote Rimlease 8 Mold Release Agent Sacrificial mold release agent specifically formulated for use as a release interface for RIM and R/RIM polyurethane processes.
Frekote SOLO Mold Release Agent A unique polymer release agent designed for all gel-coat fiberglass reinforced and filled polyester composites
Frekote WOLO HS Mold Release Agent A unique polymer release agent with high slip characteristics developed for release of low VOC gel-coat and other tough releasing polyester structures.
Frekote WOLO LV Mold Release Agent Unique low VOC polymer release agent that quickly cures and provides for multiple releases of all polyester resins.
Frekote WOLO Mold Release Agent A semi-permanent release agent for polyester gel-coat parts. Designed for fiberglass reinforced polyester (FRP) composites
Frekote WOLO-HL Mold Release Agent Solvent-based polymer release agent for fiberglass reinforced polyester (FRP) composites with a unique high slip formulation that cures quickly and provides multiple releases for low VOC polyester gel-coat and other tough releasing polyester structures
Hysol 3329 Encapsulant-Fill
Hysol 3500 A reworkable room temperature flow underfill for CSP & BGA devices. It cures at low temperatures and is a fast cure underfill providing superior processing advantages.
HYSOL 3515 Cornerbond Self-Aligning CSP Underfill™ Fast flow encapsulant for flip chip underfill applications with a gap of 1 mil.
Hysol DC0114 Die edge coating on flip chips.
HYSOL E1159 HYSOL E1159 reworkable underfill for CSP and BGA.
Hysol E1172A An innovative nonreworkable, capillary flow underfill.
Hysol EA 9258.1 Primer High temperature, water-based, chromated adhesive primer
Hysol EA 9380.05 High degree of cure after a low temperature cure time that offers strength, toughness and high temperature resistance of heat curing film adhesives with greater flexibility and ease of use.
Hysol EA 9681 An epoxy film adhesive for bonding applications.
Hysol EA 9820 High-density, one-component epoxy syntactic used on honeycomb composite parts requiring high compressive strength at temperatures up to 350°F (177°C).
HYSOL ECCOBOND 281 BLK epoxy adhesive HYSOL ECCOBOND 281 BLK epoxy adhesive
Hysol ECCOBOND 8177-0 Heat cure, general conductive, epoxy paste adhesive.
Hysol ECCOBOND C850-6 Strong, hot adhesion and good anti-migration.
Hysol ECCOBOND C990 One-component, general conductive, silver-filled epoxy paste adhesive.
Hysol ECCOBOND CA3152 Dispensible, low temperature, snap cure paste adhesive.
Hysol ECCOBOND CE3103 Heat cure, tin and tin lead compatible, paste adhesive
Hysol ECCOBOND CE3516LCL General conductive paste adhesive with low outgassing.
Hysol ECCOBOND CE3520-3 One component, flexible, nickel-filled paste adhesive
Hysol ECCOBOND CE3535 Fast cure, tin and tin lead compatible, Pb-free alternative to solder
Hysol ECCOBOND D125F Surface mount adhesive designed for high speed dispensing.
HYSOL ECCOBOND DS7300 HYSOL ECCOBOND DS7300 one component non-conductive epoxy perimeter sealant is designed to be used in display applications.
Hysol ECCOBOND DX-20C Dielectric paste adhesive
Hysol ECCOBOND E3503-1 Thermally conductive, low temperature heat cure die attach paste adhesive.
HYSOL ECCOBOND G500 HYSOL ECCOBOND G500 is a general purpose epoxy adhesive and sealant that cures to a high gloss finish.
Hysol ECCOBOND G500HF Electrically non-conductive paste adhesive.
Hysol ECCOBOND G757HF Electrically non-conductive flexible paste adhesive.
HYSOL ECCOBOND G757HF-D HYSOL ECCOBOND G757HF-D is a low halogen, non-conductive epoxy adhesive for ferrite bonding applications.
Hysol ECCOBOND S-3869 Electrically non-conductive paste adhesive.
Hysol ECCOBOND TE3530 One component, low temperature heat cure thermally conductive epoxy paste adhesive.
Hysol ECCOCOAT C110  Silver-filled epoxy coating.
HYSOL ECCOSEAL 7100 HYSOL ECCOSEAL 7100 adhesive sealant is designed for high throughput display assembly that require protection against humidity and oxygen.
Hysol ECCOSEAL 7200 Display sealant
Hysol EE0079/HD0070

 Encapsulant-potting two component, heat cure, epoxy adhesive.

Hysol EE1068/HD3404 Two component, room temperature cure, encapsulants potting epoxy.
Hysol EO1057 Low viscosity version of EO1016 UL94V-0 encapsulant for Smartcards and watch IC's.
HYSOL EO1086 HYSOL EO1086 is a one-component epoxy encapsulant.
Hysol EO1088 One component encapsulants potting epoxy.
Hysol ES0618 Hysol ES0618 is a filled epoxy system with a high operating temperature and long pot life.
HYSOL ES1000 Black, low cost, flexible, capable of UL94HB, resistant to thermal shock, non-abrasive filled, high impact strength, long pot life
HYSOL ES1301 Long working time, excellent imprognation of fine windings
HYSOL ES1900 Clear, low shrinkage, excellent chemical resistance, strong bond to substrates
HYSOL ES1901 Tough, fast setting, optically clear, low viscosity, room temperature curing, chemical resistant, industrial grade epoxy adhesive potting/encapsulating material.
HYSOL ES1904 HYSOL ES1904 is an opaque, medium-viscosity epoxy resin system recommended for small potting and laminating applications.
HYSOL ES2202 Withstands high heat distortion temperature. Excellent chemical resistance, excellent performance under high moisture and humidity.
HYSOL ES2207 High heat distortion temperature, low expansion, dimensionally stable
HYSOL ES2500 Black, fast gel, capable of UL1446 to 180C and UL94HB at 6mm, Easy handling, resilient
HYSOL ES4512HF Non-Conductive Potting Compound Two-part non-conductive potting compound. It is used in the consumer & Industrial market.
Hysol FF2200 Reflow encapsulant designed for the assembly and protection of flip chip semiconductor devices utilizing a single material approach.
Hysol FP4401 Hysol FP4401is a low flow, high purity liquid epoxy encapsulant.
Hysol FP4545FC Hysol FP4545FC is a low viscosity version of FP4548FC
Hysol FP4547 Hysol FP4547 is a fast-flowing, low stress underfill for fine-pitch flip chip applications.
HYSOL FP4548FC High purity, liquid epoxy encapsulant designed as an underfill for flip chip devices.
Hysol FP4581 Hysol FP4581 is used on lead-free flip chip packages (L3 - 260°C); low-k/Cu flip chip packages with Hi-Pb bumps, flux compatible.
Hysol FP4583 Hysol FP4583 is a high purity, FC underfill, high lead applications
Hysol FP4585 Capillary underfill
Hysol FP4652 Hysol FP4652 is a fast cure, low stress version of FP4450 for a large array of packages.
HYSOL FP5000 One part, high purity, laminate packages, non-conductive paste (NCP, CSP, SCSP, SIP) designed for thermal compression bonding process.
Hysol FP5200 Hysol FP5200 has excellent JEDEC MSL performance. Compatible with bump assembly. Recommended for gold / gold and gold / SAC alloy solder joint.
Hysol FP5500 NCP for thermal compression bonding
Hysol FP6401 Hysol FP6401 is a high purity, liquid flexible damming material.
Hysol GR15F-A HYSOL GR15F-A anhydride cured molding compound is formulated to contain spherical fillers.
Hysol GR2220 Molding compound
Hysol GR2620  Molding compound
Hysol GR2710 Hysol GR2710 is a gold, low stress/non-flame retarded molding powder, for tantalum and ceramic capacitors, leaded or surface-mounted sensors.
Hysol GR2720  Molding compound
Hysol GR2725 Molding compound
Hysol GR2820 Gold, ultra low stress, non-halogenated molding powder, tantalum and ceramic capacitors, leaded or surface-mounted sensors
HYSOL GR640FF
HYSOL GR640MOD
Hysol GR725LS Green molding compound designed for power SO and surface mount discrete packages (High Power Packages, Power SOIC, Power SSOP).
Hysol GR750  High thermal conductivity-isolated packages, green, designed to improve thermal management for semiconductor devices.
Hysol GR750-SC  Molding compound
Hysol GR750HT-25  Hysol GR750HT-25 is a high thermal conductivity molding compound using fully alumina fillers designed to improve thermal management for semiconductor devices.
Hysol GR828 Hysol® GR828™ is green, specifically designed for SO packages up to TSSOP/TQFP. Passes JEDEC Level 1 @ 260°C reflow.
Hysol GR828D  Ultra low stress, high adhesion molding compound
Hysol GR828DD Green, semiconductor grade, low stress and high adhesion molding compound. It is especially designed for DPAK/D2PAK packages with Ni and copper/Ag plating lead frames.
HYSOL GR828HS Low stress green molding compound with Ni/Pd and copper leadframes
Hysol GR869  Molding compound. Surface mount/leadframes (QFP, T/LQFP, TSOP, SOIC)
Hysol GR9810 Series Hysol GR9810 series are technologically advanced epoxy molding compounds designed for use as an overmold on a wide variety of SIP, PBGA, CSP and BGA.
Hysol GR9810-1  Technologically advanced epoxy molding compound designed for use as an overmold on a wide variety of laminate based molded array packages including SIP and flip-chip array packages that have been conventionally underfilled
Hysol GR9820-1 Technologically advanced epoxy molding compound designed for use as an overmold on a wide variety of BGA and CSP.
Hysol GR9851 Technologically advanced epoxy molding compound designed for use as an overmold on a wide variety of laminate based molded array packages
Hysol GR9851M State-of-the-art epoxy molding compound developed to meet the encapsulation requirements of memory card (MMC) devices.
HYSOL Huawei KL-1000-4T Lowest cost of ownership with superior moldability and reliability, extremely suitable for DIP packages
HYSOL Huawei KL-6500H High adhesion & low stress molding compound suitable for SOIC, D/D2-PAK and QFP packages.
HYSOL Huawei KL-G200 Green mold compound suitable for transistors such as Diodes and TO packages; contains no bromine, antimony or phosphorus flame retardant.
HYSOL Huawei KL-G650H High adhesion, ultra low stress, green mold compound suitable for TSOP, TSSOP and QFP; contains no bromine, antimony or phosphorus flame retardant.
HYSOL Huawei KL-G750 Superior adhesion technology and enhanced reliability performance
Hysol Huawei KL-G800lmp

A high adhesion, ultra low stress, green mold compound

Hysol Huawei KL-G900H High adhesion, ultra low stress, green mold compound suitable for BGA and contains no bromine, antimony or phosphorus flame retardant.
Hysol Huawei KLG750 Superior adhesion technology to ensure zero delamination performance for SOT and SOIC packages.
Hysol KL-2500-1K Low thermal expansion and low stress molding compound suitable for GBU,KBU,TO,ZIP,SIP,DIP and SDIP packages, providing superior moldability and reliability.
HYSOL KL-4500-1S Low stress molding compound suitable for SOT, D-PAK and D2-PAK packages, providing high purity and high reliability. KL-4500-1S™ meets JEDEC Level 1/260C.
Hysol KL-G150 Molding compound
Hysol KL-G200S Molding compound. Surface mount/leadframes
Hysol KL-G450H Low stress, green mold compound suitable for SOIC, SOP, SOJ and QFP; contains no bromine, antimony or phosphorus flame retardant.
Hysol KL-G450S Molding compound. Surface mount/leadframes (SOT/SMX).
Hysol KL-G730 HYSOL KL-G730 epoxy molding compound delivers outstanding performance and ease of use. This material is designed to achieve JEDEC Level 1 requirements, at 260°C reflow temperature. Hysol KL-G730 offers enhanced reliability peformance for T/LQFP packages. KL-G730 meets UL 94 V-0 flammability at 3.175mm thickness.
Hysol KL-G900HC Molding compound
Hysol KL-G900HP Molding compound
Hysol KO1095 Hysol KO1095 is an epoxy-based die attach paste.
Hysol MG15F

Anhydride-cured Molding Compound designed specifically for use in high voltage power applications requiring good electrical stability at high temperature.

Hysol MG15F-R Hysol MG15F-R is a anhydride cured molding compound designed for use in high voltage power applications.
HYSOL MG21-02 High productivity, low cost material designed for low voltage diodes and small signal transistors
Hysol MG21F-02 Hysol MG21F-02 is an ECN base molding compound suitable for medium voltage.
Hysol MG33F Electronic grade epoxy molding compound
HYSOL MG40F High productivity molding compound for high volume encapsulation of SOT and DIP
HYSOL MG40F-BIM
Hysol MG40FS Conventional molding of SMD and SIP networks; gold version MG40F-0526 available
HYSOL MG45F-0459LS Delivers a high thermal conductive solution for TO-220F/3PF's thermal requirements, low moisture absorption and low thermal expansion
Hysol MG52F-08 Hysol MG52F-08 is a high productivity, low stress, molding compound designed for high volume encapsulation of various surface mount devices.
Hysol OS1600 Hysol OS1600 is a water white casting system suitable for use on visible and I.R. L.E.D.
Hysol OS2902 Hysol OS2902 is a low stress, high performance L.E.D. casting system for discrete L.E.D.'s and displays.
Hysol OS4210 Hysol OS4210 is a low viscosity, long pot life 2.3.5.2.11.4 system that cures at 85°C or above to yield clear water white castings.
Hysol OTO149-3 Clear glob top material with good adhesion to any substrate.
Hysol PC29 Thin film printed circuit board coating with good toughness and high flexibility
Hysol PC30STD Hysol PC30STD is a waterborne acrylic, one component coating recommended for printed board coating.
Hysol PC40-UT Hysol PC40-UT is a solvent-free, low-viscosity, rapid gel, UV-thermal cure one component conformal coating.
Hysol PC62 Acrylic conformal coating
Hysol PL 696 Epoxy-based structural film adhesive designed primarily for out-of-autoclave curing process applications requiring low cure temperatures as well as low curing pressures.
Hysol QMI 301 Silver filled, conductive cyanate ester adhesive for attachment specifically designed for high throughput attachment of integrated circuits to cofired ceramic packages.
Hysol QMI 536UV Used for component or die attach where very high electrical and thermal conductivity is required. Suitable for high heat dissipation devices and solder replacement applications.
HYSOL QMI168 Silver filled conductive adhesive for attachment of integrated circuits and components to metal leadframes, designed for high volume production applications.
HYSOL QMI2419M No dry Ag/glass die attach for glass seal packages
Hysol QMI5030 Unique liquid / paste heat cure die attach adhesive product resulting from blend of thermoset and thermoplastic resins.
HYSOL QMI505MT Silver filled conductive adhesive for attachment of integrated circuits and components to advanced metal and ceramic substrates
Hysol QMI516 Silver filled conductive adhesive for attachment of integrated circuits and components to advanced substrates
HYSOL QMI516IE

 

 

Hysol QMI516LC Hysol QMI516LC is a low temperature cure, general conductive, silver-filled paste adhesive.
Hysol QMI518 Hysol QMI518 is a very low stress conductive die attach adhesive.
HYSOL QMI529LS Low stress, silver-filled, low bleed conductive die attach adhesive specifically recommended for Ag/Cu and bare Cu lead frame applications
HYSOL QMI529NB Silver-filled, no bleed conductive, UV curable die attach adhesive specifically recommended for NiPdAu leadframe applications
Hysol QMI536NB-1A3 High JEDEC performance for first die and die-to-die bonding. Non-conductive and non-damaging to the die face. Can be cured as low as 80°c. No bleed.
HYSOL QMI536UV
HYSOL QMI550SI Silica filled non-conductive adhesive designed for use in stacked chip scale packages (SCSP) in the first die attach position
Hysol QMI718 Hysol QMI718 is designed to deliver exceptional JEDEC performance in SOIC packages using copper finished leadframes.
Hysol STYCAST 2561/CAT 11 Encapsulant-potting
HYSOL STYCAST 2651MM/CATALYST 23LV HYSOL STYCAST 2651MM CATALYST 23LV is a general purpose encapsulant designed for machine dispensing and for parts requiring post molding machining.
HYSOL STYCAST 2651MM/CATALYST 9 HYSOL STYCAST 2651MM Catalyst 9 is a general purpose encapsulant designed for machine dispensing and for parts requiring post molding machining.
Hysol STYCAST 2850FT"/CAT 11 Heat cure encapsulant-potting.
Hysol STYCAST 2850FT/CAT 23LV Room temperature cure encapsulant-potting
HYSOL STYCAST 2850KT/CATALYST 9 HYSOL STYCAST 2850KT with CATALYST 9 epoxy encapsulant is designed for heat sink replacement in non-integrated electrical components and assemblies.
HYSOL STYCAST 2850MT-Catalyst 24LV HYSOL STYCAST 2850MT-Catalyst 24LV is a two component, electrically insulating general purpose encapsulant. It
Hysol STYCAST 50500D For protection of wire bonds consider this high purity material as either a dam or a glob top.
Hysol STYCAST A312 A one-component, reworkable unfilled solventless epoxy paste adhesive / underfill encapsulant; fast curing and excellent chemical and heat resistance.
HYSOL STYCAST E1070 HYSOL STYCAST E1070 epoxy encapsulant
Hysol STYCAST E1847 Encapsulant-potting
HYSOL STYCAST EFF15 syntactic foam powder HYSOL STYCAST EFF15 epoxy based free flowing syntactic foam powder.
Hysol STYCAST U2500 Encapsulant
Hysol SynCore HC 9875 High crush strength, low density syntactic core material, co-curable with a variety of 350°F / 177°C curing epoxy prepregs.
Hysol SynSpand EA 9835 An expanding syntactic film, which cures at 300°F / 149°C, used for jet engine abradable fan seals.
Hysol SynSpand EA 9840 Expanding syntactic film, cures at 300°F / 149°C, used for jet engine abradable fan seals.
Hysol TRA-BOND FDA16 A medium viscosity, room temperature cure, epoxy resin paste system specifically designed for medical device applications.
Hysol UF3800 A high reliability, reworkable, room temperature dispensable underfill compatible with most common solder pastes.
HYSOL UF3810 HYSOL UF3810 reworkable epoxy underfill is designed for CSP and BGA applications.
Hysol US 5501 Hysol US5501 (formerly Loctite® 821200R & C) is a 100% solids, mineral filled, urethane adhesive that is very low in volatile components and is flame retardant.
Hysol US0146 Hysol US0146 is an unfilled, two component clear amber polyurethane casting system formulated for potting.
HYSOL US1150 HYSOL US1150 is an extended polybutadiene/MDI base, mineral filled, medium hardness, ambient cure urethane encapsulant/sealant. This material can be used for potting electronics or devices for protection against environmental hazards.
Hysol US2650 Hysol US2650 is an inexpensive, low viscosity, flexible, flame retardant castor oil/MDI based urethane potting compound.
Hysol US2652 Hysol US2652 is a 100% solid, mineral filled urethane adhesive that is very low in volatile components.
Hysol US5511 Hysol US5511 is a flexible, flame retardant, mineral filled castor oil/MDI based polyurethane compound.
Hysol US5532 Encapsulant potting urethane.
Hysol US5544 Hysol US5544 is a fast gelling, flexible, flame-retardant, mineral-filled polyurethane compound.
HYSOL XA80215-1 HYSOL XA80215-1 is a one component, non-conductive photocurable adhesive designed for high throughput assembly operations. This material is suitable for use with temperature sensitive substrates and components.
HYSOL XUV80260 HYSOL XUV80260 is a UV curable display perimeter sealant for rigid type OLED.
HYSOL XUV80270-1 HYSOL XUV80270-1 is a one-component, non-conductive, UV curable adhesive sealant for high throughput display assembly that require protection against humidity. It is formulated to cure very fast when exposed to UV light, allowing for fast processing of a thin section of material even through ITO coated glass.
Krytox RFE PFPE High Performance Lubricant Synthetic, long-lasting lubrication
Loctite 565 Thread Sealant (Automotive Aftermarket Only) Controlled strength thread sealant for tapered & straight fittings.
Loctite 11C Hysol Epoxy Adhesive General purpose epoxy, bonds and seals, machinable
LOCTITE 190024LV Single component, UV curable adhesive.
LOCTITE 1C Hysol Epoxy Adhesive High temperature and chemical resistant, gap filling high viscosity epoxy paste and multiple surface structural adhesive
Loctite 1C-LV Hysol Epoxy Adhesive High temperature and chemical resistant, gap filling, impact resistant, medium viscosity
LOCTITE 1X Hysol Hot Melt Adhesive Medium to fast setting, hot melt adhesive
Loctite 2033 Blue-Green Threadlocker Gel Medium strength threadlocker gel, no run formula.
LOCTITE 2046 Food Compliant, Primerless, Medium Strength Blue Threadlocker Compliant with FDA food additive regulations developed specifically for the Food and Beverage industries. Disassemble with hand tools.
LOCTITE 2047 High Lubricity, Large Bolt, High Strength Black Threadlocker For fasteners over 7/8" in diameter. High lubricity allows proper clamp load to be achieved. Heat required to remove.
LOCTITE 220 Medium Strength, Wicking, Mil-Spec Blue Threadlocker MIL-SPEC Low strength, removable, wicking grade threadlocker for small fasteners under ¼”.
LOCTITE 222 Low Strength Purple Threadlocker Low strength removable purple threadlocker for small fasteners under ¼”.
LOCTITE 222 Purple Threadlocker (Automotive Aftermarket Only) Low strength, removable purple threadlocker for small fasteners.
LOCTITE 222MS Low Strength, Small Screw, Mil-Spec Purple Threadlocker TOP PICK Mil Spec Low strength removable purple threadlocker for small fasteners under ¼”.
LOCTITE 232 Retaining Compound Medium strength retaining compound for heavy interferences and high torque
LOCTITE 2400 Enhanced Health & Safety Medium Strength Blue Threadlocker Medium strength blue theadlocker formulated to enhance health and safety.
LOCTITE 242 Medium Strength Mil-Spec Blue Threadlocker General purpose, MIL-SPEC, medium strength, blue threadlocker for ¼” to ¾” (6 to 20 mm) bolts. Disassemble with hand tools.
LOCTITE 2422 Ultra High Temperature, Medium Strength Blue Threadlocker Up to 650ºF, medium strength threadlocker. For ½” to ¾” bolts. Disassemble with hand tools.
LOCTITE 243 Blue Threadlocker (Automotive Aftermarket Only) Designed for the locking and sealing of threaded fasteners between 1/4" and 3/4" (6 to 20 mm), which require normal disassembly with standard hand tools; surface insensitive.
LOCTITE 243 Primerless, Oil Tolerant, Medium Strength, Removable, Blue Threadlocker TOP PICK Primerless, oil tolerant, surface insensitive, medium strength, blue threadlocker designed for the locking and sealing of threaded fasteners between 1/4" and 3/4" (6 to 20 mm). Disassemble with hand tools.
LOCTITE 2432 Low Halogen, Low Sulfur Medium Strength Blue Threadlocker Medium strength low halogen, low sulfur threadlocker for use in nuclear facilities. Disassemble with hand tools.
Loctite 246 High Temperature, Medium Strength Blue Threadlocker Up to 450°F, Medium strength, surface insensitive threadlocker for heavy duty applications. Disassemble with hand tools.
LOCTITE 248 Semi Solid Stick Medium Strength Blue Threadlocker TOP PICK Medium strength blue threadlocker in stick form. Perfect for overhead and tough to reach applications. Disassemble with hand tools.
LOCTITE 249 Anaerobic Blue Threadlocker Tape TOP PICK Medium strength, general purpose, blue threadlocker in tape form, Disassemble with hand tools.
Loctite 25062 Anaerobic Activator Activator for anaerobics
LOCTITE 262 High Strength Mil-Spec Red Threadlocker High strength mil-spec threadlocker for bolts up to ¾”. Heat required to remove.
LOCTITE 2620 Ultra High Temperature, High Strength Red Threadlocker Up to 650* F High temperature, high strength threadlocker. Heat required to remove.
LOCTITE 263 Primerless, Oil Tolerant High Strength Red Threadlocker TOP PICK Primerless, oil tolerant, surface insensitive, high strength, red threadlocker for the permanent locking and sealing of threaded fasteners. Heat required to remove.
LOCTITE 266 High Temperature, High Strength Red-Orange Threadlocker High strength, surface insensitive, high temperature threadlocker.
LOCTITE 268 Semi Solid Stick High Strength Red Threadlocker TOP PICK High Strength red threadlocker in stick form. Perfect for overhead and tough to reach applications. Heat required to remove.
LOCTITE 2700 Enhanced Health & Safety High Strength Red Threadlocker High strength red threadlocker formulated to enhance health and safety.
LOCTITE 271 Mil Spec Low Viscosity High Strength, Red Threadlocker High strength, low viscosity threadlocker for fasteners up to 1” diameter. Heat required to remove.
LOCTITE 272 High Temperature, High Strength Red Threadlocker Up to 450°F high temperature, high strength, fast curing threadlocker. Heat required to remove.
LOCTITE 2760 High Strength, Primerless Red Threadlocker High strength, fast curing, surface insensitive red threadlocker.
LOCTITE 277 Large Bolt High Strength Red Threadlocker High strength red threadlocker for large bolts > 7/8”. Heat required to remove.
LOCTITE 2892 High Temperature Flange Sealant Improves flange-sealing reliability by overcoming the shortcomings of pre-cure gaskets and other gasket products.
LOCTITE 290 Wicking Grade MIL-SPEC Medium-High Strength Green Threadlocker TOP PICK MIL-SPEC Medium to high strength, wicking grade threadlocker for pre-assembled parts.
Loctite 294 High Strength, High Temperature, Green Threadlocker Medium - high strength, high temperature, wicking grade threadlocker for pre-assembled parts.
Loctite 3035 Polyolefin Bonder Works where traditional low surface energy bonders often fail, and eliminates the need for primers or surface treatments. Fast fixture time.
Loctite 3050 Structural Adhesive A weld-through capable, high temperature, acid resistant, two component acrylic adhesive designed for weld / rivet reduction.
Loctite 3051 Light Cure Medical Device Adhesive Loctite 3051 is designed for bonding cannulae into hubs, syringes and lancets.
Loctite 3060 Structural Adhesive Two-component, acid-free, toughened external-mix, two-step acrylic requires no static mixing or activators. Turns green when mixed. Excellent high temperature resistance.
LOCTITE 3092 Instant Adhesive Fast curing cyanoacrylate adhesive for bonding a variety of plastics, rubber and porous materials.
Loctite 3100 Light Cure Adhesive Acrylic, low modulus, high viscosity, UV/V light cure adhesive.
Loctite 3101 Light Cure Adhesive Acrylic, low modulus, high viscosity, UV/V light cure adhesive.
Loctite 3103 Light Cure Adhesive Thixotropic, flexible, acrylic, low modulus, medium viscosity, UV/V light cure adhesive.
Loctite 3104 Light Cure Adhesive Acrylic, high strength, low viscosity, UV/V light cure adhesive.
Loctite 3105 Light Cure Adhesive An acrylic, high strength, low viscosity, UV/V light cure adhesive.
Loctite 3107 Light Cure Adhesive Acrylic, low viscosity, fluorescing, UV/V light cure adhesive.
Loctite 3108 Light Cure Adhesive Acrylic, low durometer, rubbery, UV cure adhesive.
LOCTITE 3118 White image sensor adhesive.
LOCTITE 3119 Cures rapidly at relatively low temperature and provides excellent adhesion on a wide range of substrates.
LOCTITE 3128 Loctite 3128 is an edgebond, thermal cure, black image sensor adhesive.
LOCTITE 3128NH LOCTITE 3128NH edgebond underfill
LOCTITE 3129 Image sensor adhesive.
LOCTITE 3131 Photonics material
Loctite 3140 Hysol Epoxy Resin, General Purpose Epoxy resin, part of a two part system to be used with a hardener, formulated for general purpose potting and encapsulating
Loctite 3141 Hysol Epoxy Resin, High Temperature Epoxy resin, part of a two part system to be used with a hardener, formulated for high temperature potting and encapsulating
Loctite 3142 Hysol Epoxy Resin, Thermally Conductive Epoxy resin, part of a two part system to be used with a hardener, formulated for thermally conductive potting and encapsulating
Loctite 3145 Hysol Epoxy Resin, Flame Retardant Epoxy resin, part of a two part system to be used with a hardener, formulated for flame retardant potting and encapsulating
LOCTITE 315 Output Room temperature cure adhesive, self-shimming for electrical isolation
Loctite 3160 Hysol Epoxy Hardener, Glossy Surface Finish Epoxy hardener, part of a two part system to be used with a resin, formulated for glossy surface finish potting and encapsulating
Loctite 3162 Hysol Epoxy Hardener, Fast Cure Epoxy hardener, part of a two part system to be used with a resin, formulated for fast cure potting and encapsulating
Loctite 3163 Hysol Epoxy Hardener, Excellent Adhesion Epoxy hardener, part of a two part system to be used with a resin, formulated for fast cure potting and encapsulating
Loctite 3164 Hysol Epoxy Hardener, General Purpose Epoxy hardener, part of a two part system to be used with a resin, formulated for general purpose potting and encapsulating
Loctite 3165 Hysol Epoxy Hardener, Low Shrinkage Epoxy hardener, part of a two part system to be used with a resin, formulated for low shrinkage potting and encapsulating
Loctite 3173 Hysol Polyurethane Resin, General Purpose Polyurethane resin, part of a two part system to be used with a hardener, formulated for general purpose potting and encapsulating
Loctite 3182 Hysol Polyurethane Hardener, Fast Cure Polyurethane hardener, part of a two part system to be used with a resin, formulated for gast curing potting and encapsulating
Loctite 3183 Hysol Polyurethane Hardener, General Purpose Polyurethane hardener, part of a two part system to be used with a resin, formulated for general purpose potting and encapsulating
Loctite 3184 Hysol Polyurethane Hardener, Flame Retardant Polyurethane hardener, part of a two part system to be used with a resin, formulated for flame retardant potting and encapsulating
Loctite 3191

Optical bonding UV curing acrylic

Loctite 3192 Loctite® Liquid Optically Clear Adhesives (LOCAs) acrylic
Loctite 3193 Loctite® Liquid Optically Clear Adhesives (LOCAs) acrylic
Loctite 3193HS

Optical bonding UV curing acrylic

Loctite 3194

Optical bonding UV curing acrylic

Loctite 3195 Loctite® Liquid Optically Clear Adhesives (LOCAs) acrylic
Loctite 3195DM Loctite® Liquid Optically Clear Adhesives (LOCAs) (with chemistry) acrylic
Loctite 3196 Loctite® Liquid Optically Clear Adhesives (LOCAs) (with chemistry) acrylic
Loctite 3199

Optical bonding UV curing acrylic

Loctite 3201 Light Cure Adhesive High viscosity, flexible, UV/V, light cure adhesive.
Loctite 3211 Light Cure Adhesive Thixotropic, flexible, UV/V, light cure adhesive.
LOCTITE 3217 Photonics material
LOCTITE 3220 Photonics material-thermal cure
LOCTITE 3220WH LOCTITE 3220WH is a one component designed for use in heat sensitive optoelectronic components and other microelectronic devices. This material offers excellent light reflection characteristics. 3220WH is the white colored version of Loctite 3220 adhesive.
LOCTITE 324 Speedbonder Structural Adhesive Two-step acrylic, no-mix, high impact, solvent resistant, gap filling, multiple surface structural adhesive
LOCTITE 325 Speedbonder Structural Adhesive, High Temperature Two-step acrylic, no-mix, high temperature, solvent resistant, gap filling adhesive
LOCTITE 326 Speedbonder Structural Adhesive, Fast Fixture Two-step acrylic, no-mix, fast fixturing, general purpose, solvent resistant, multiple surface structural adhesive
Loctite 3261 Low tin, anaerobic structural adhesive
LOCTITE 330 Depend Structural Adhesive Two-step acrylic, no-mix, general purpose, high viscosity, multiple surface structural adhesive
Loctite 3311 Light Cure Adhesive, Plastic/Metal Low viscosity, slightly flexible, UV/V light cure adhesive.
LOCTITE 3318 LOCTITE 3318 is suitable for a wide variety of coating applications that require strict humidity reliability performance, such as ITO/COG overcoat in LCD module assembly.
LOCTITE 3318M UV coating for LCD module assembly.
Loctite 332 Structural Adhesive, Severe Environment Two-step acrylic, no-mix, high temperature, high viscosity, multiple surface structural adhesive
LOCTITE 3323 Has been developed for encapsulation of wire bonded dies, used for Smartcard IC modules. It is designed for use only with LOCTITE UV fill encapsulants, such as 3327 and 3329. Either combination of dam and fill will pass mechanical stress testing and high reliability tests; typically thermal shock cycling -55 °C to +125 °C and humidity heat aging 85 °C / 85 % RH.
LOCTITE 3327 Has been developed for encapsulation of wire bonded dies, used for Smartcard IC modules. It is designed for use only with LOCTITE UV dam encapsulants, such as LOCTITE 3323. This combination of dam and fill will pass mechanical stress testing and high reliability tests; typically thermal shock cycling -55 °C to +125 °C and humidity heat aging 85 °C / 85 % RH.
Loctite 3335 Light Cure Adhesive, UV Cationic Epoxy Rigid, one-part, high temperature resistance, excellent surface cure, low shrinkage, and low outgassing
Loctite 3337 Light Cure Adhesive, UV Cationic Epoxy Semi-rigid, general purpose, one-part, medium viscosity epoxy with excellent surface cure, low shrinkage, low outgassing
Loctite 334 Structural Adhesive, High Performance Two-step acrylic, one-part, dual-cure, toughened, high viscosity, magnetl bonding adhesive
Loctite 3340 Light Cure Adhesive, UV Cationic Epoxy Semi-rigid, chemically resistant, one-part, medium viscosity epoxy with excellent surface cure, low shrinkage, low outgassing
Loctite 3341 Light Cure Adhesive, Plasticized Substrates Low viscosity, UV/V light cure adhesive.
Loctite 3345 Light Cure Adhesive, Glass/Metal Medium viscosity, UV adhesive
Loctite 3355 Light Cure Adhesive, Pre-Activated Epoxy Semi-flexible, UV/Visible light activated epoxy; delay curing, one-part, extremely low shrinkage, low outgass, and acid free
Loctite 3364 Urethane Adhesive/Potting Compound A two-component urethane designed for flame resistance and fast cure
Loctite 3370 One-Part Polyurethane Black Loctite 3370 one-part polyurethane adhesive and sealant is a versatile product solution that can be used in a wide range of applications.
Loctite 3370 One-Part Polyurethane Grey Loctite 3370 one-part polyurethane adhesive and sealant is a versatile product solution that can be used in a wide range of applications.
Loctite 3370 One-Part Polyurethane White Loctite 3370 one-part polyurethane adhesive and sealant is a versatile product solution that can be used in a wide range of applications.
Loctite 3381 Light Cure Adhesive, Flexible/Plastics Medium viscosity, flexible, UV light cure adhesive.
Loctite 3407 OptiLOC Fiber Optic Adhesive, Silicone/Heat Cure One part, heat cure silicone
LOCTITE 348 Surface mount adhesive
Loctite 349 Impruv Light Cure Adhesive Acrylic, high viscosity, UV light cure adhesive.
Loctite 3491 Light Cure Adhesive Acrylic, medium viscosity, UV light cure adhesive.
Loctite 3492 Light Cure Adhesive Acrylic, low viscosity, UV light cure adhesive, uv/visible, with fluorescence.
Loctite 3493 Light Cure Adhesive Acrylic, high viscosity, UV light cure adhesive.
Loctite 3494 Light Cure Adhesive Acrylic, medium viscosity, durable, UV/V light cure adhesive.
LOCTITE 3508 Lead-free, one-component epoxy cornerbond adhesive. Applied pre-reflow and allows self-alignment of SMT components during reflow operation. Used for lead-free applications.
LOCTITE 3509 One component heat cure epoxy designed for use as board level cornerbond for IC packages such as CSP's and BGA's.
LOCTITE 3513 Reworkable, single-component epoxy used as a underfill for CSP or BGA's.
LOCTITE 3515 One component epoxy adhesive, designed to allow self-alignment of SMT components during the reflow operation.
LOCTITE 3517 One part, heat curable epoxy. It is designed for use as a reworkable CSP (FBGA) or BGA underfill for protection of solder joint against mechanical stress when used for hand held electronics devices.
LOCTITE 3517M One component reworkable underfill.
LOCTITE 3518 One part, heat curable epoxy, designed as non-reworkable CSP/BGA underfill for protection of solder joint against mechanical stress when used for hand held electronics devices
Loctite 352 Light Cure Adhesive High viscosity, tough, flexible, vibration resistant UV light cure adhesive.
Loctite 3523 Used to bond, seal or coat metal and glass components in industrial applications
Loctite 3526 Light Cure Acrylic UV/V/Heat cure version of Loctite® 3525
Loctite 3536 Loctite 3536 is a reworkable, CSP/BGA underfill designed to cure rapidly at low temperatures.
Loctite 3541 Halogen free structural 1-part polyurethane reactive hotmelt adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Excellent adhesion to plastics and short open time.
Loctite 3542 Halogen free structural 1-part polyurethane reactive hot melt adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Excellent adhesion to plastics, metals, & glass. Extended open time vs. Loctite 3541.
LOCTITE 3548 Next generation reworkable underfill for thermal and mechanical reliability.
LOCTITE 3549 Next generation reworkable underfill for thermal and mechanical reliability.
Loctite 3551 Loctite 3551 is a one component heat cure epoxy designed for use as board level underfill for IC packages such as CSP's and BGA's.
LOCTITE 3563 Rapid curing, fast flowing, reworkable, liquid epoxy for use as a capillary flow underfill for packaged IC's
Loctite 3572 Halogen free structural 1-part polyurethane reactive hotmelt adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Superior flexibility vs. traditional Reactive Polyurethane Hotmelts. Excellent adhesion to plastics, metals, & glass. Extended open time vs. Loctite 3542.
Loctite 3580 Halogen free structural 1-part polyurethane reactive hot melt adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. UV preactivation provides best in class fixture time. Excellent adhesion to plastics, metals, & glass.
LOCTITE 3593 Loctite 3593 is a nonreworkable, underfill for high mechanical reliability. Fast flow and snap cure for improved process time.
LOCTITE 3609 Used for medium to high speed dispense applications. Excellent green strength for large components.
LOCTITE 3611 Stencil printable/pin transfer product for the bonding of surface mounted devices to printed circuit boards prior to wave soldering.
LOCTITE 3612 Designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering.
LOCTITE 3616 Surface mount adhesive
LOCTITE 3619 Used for ultra low temperature cure, high speed syringe dispense.
LOCTITE 3621 Surface mount adhesive
LOCTITE 3627 Syringe-dispensed surface mount adhesive
LOCTITE 3629 Designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering.
LOCTITE 3629 Chipbonder Adhesive Designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering
LOCTITE 3629C One-component, halogen free, fast cure epoxy formulated for bonding surface mounted devices to printed circuit boards prior to wave soldering.
Loctite 363 Impruv Light Cure Adhesive Acrylic, low viscosity, UV light cure adhesive.
Loctite 36369 Conrtolled Viscosity & Low Exotherm (85°C).
Loctite 36370 Conrtolled Viscosity & Low Exotherm (85°C).
Loctite 3650 Hysol Polyolefin Hot Melt Adhesive Polyolefin hot melt for plastic bonding
LOCTITE 366 Light Cure Adhesive Acrylic, medium viscosity, UV light cure adhesive.
Loctite 3702 Display sealant
LOCTITE 3705 Edgebond, UV cure adhesive designed for bonding electronics components on PCBs.
LOCTITE 3719 UV acrylic adhesive. (LPD209)
Loctite 3720 ITO/COG overcoat
LOCTITE 3730 Display sealant
LOCTITE 3733 UV acrylic adhesive.
LOCTITE 3736 UV acrylic adhesive.
Loctite 3751 LiteTak Light Cure Adhesive UV acrylic adhesive.
Loctite 37735 Conrtolled Viscosity & Low Exotherm (85°C).
Loctite 3779 Light Cure Adhesive UV acrylic adhesive.
Loctite 3780 LOCTITE 3780 is a single component, UV light curable sealant for LCD end-sealing applications.
LOCTITE 3781 UV acrylic adhesive. (LPD181)
Loctite 3782 (LPD182) Pin terminal, temporary bonding
LOCTITE 380 Toughened Instant Adhesive Low viscosity instant adhesive, black, rubber toughened.
LOCTITE 381 Cored Wire
LOCTITE 382 Tak Pak Instant Adhesive High viscosity instant adhesive, one part, room temperature cure.
LOCTITE 383 Output LOCTITE 383 Output is a high-strength, room temperature cure adhesive for permanent assemblies.
LOCTITE 384 Loctite 384 Output is a repairable, room temperature cure adhesive utilized for parts subject to disassembly.
Loctite 3860 Loctite 3860 is a medium viscosity versatile epoxy casting system that exhibits high thermal conductivity and low thermal expansion.
Loctite 3861 Loctite 3861 is a low viscosity versatile epoxy casting system that exhibits high thermal conductivity and low thermal expansion.
LOCTITE 3865HV UV A two-component, UV curing epoxy
LOCTITE 3873 Fast curing, high-conductivity, self-shimming, room temperature cure, paste adhesive for bonding heat-generated devices to thermal spreader.
LOCTITE 3874 Loctite 3874 is a fast-curing, high-conductivity, room temperature cure adhesive for bonding heat-generated devices to thermal spreader without glass beads.
Loctite 3875 Loctite 3875 is the highest conductivity room temperature cure system.
LOCTITE 3876

LOCTITE 3876 is the highest conductivity, self-shimming, room temperature cure system.

LOCTITE 3900 Air-dry acrylic coating designed for small production runs.
Loctite 3911 Light Cure Adhesive Low viscosity, UV/V light cure adhesive.
Loctite 3912 Light Cure Adhesive Medium viscosity, UV/V light cure adhesive.
Loctite 3913 Light Cure Adhesive Medium viscosity, UV/V light cure adhesive.
LOCTITE 392 Structural Adhesive, Magnet Bonder One-part, dual-cure, toughened, high viscosity, two-step acrylic magnet bonding adhesive
Loctite 3921 Light Cure Adhesive, Plastic/Metal Low viscosity, fluorescing, UV/V light cure medical device adhesive with sterilization resistance.
Loctite 3922 Light Cure Adhesive, Plastic/Metal Low viscosity, fluorescing, UV/V light curing medical device adhesive with sterilization resistance.
Loctite 3926 Light Cure Adhesive, Plastic/Metal High viscosity, with fluorescence, UV/V light curing medical device adhesive with sterilization resistance.
Loctite 3933 Light Cure Adhesive Medium viscosity, thixotropic, fluorescing, UV/V light curing adhesive with sterilization resistance.
Loctite 3936 Light Cure Adhesive, High Performance/Various Substrates High viscosity, fluorescing, UV/V light curing medical device adhesive with sterilization resistance.
Loctite 3941 Light Cure Adhesive, High Performance/Various Substrates Low viscosity, fluorescing, UV/V light curing medical device adhesive with sterilization resistance.
Loctite 3942 Light Cure Adhesive Medium viscosity, fluorescing, UV/V light curing biocompatible adhesive with sterilization resistance.
Loctite 3943 Light Cure Adhesive, High Performance/Various Substrates High viscosity, fluorescing, UV/V light curing adhesive with sterilization resistance.
Loctite 3944 Light Cure Adhesive Medium viscosity, fluorescing, UV/V light curing biocompatible adhesive.
Loctite 394R Conformal Coating Conformal coating.
Loctite 3971 Light Cure Adhesive Low viscosity, UV/V light curing medical device adhesve, fluorescing.
Loctite 3972 Light Cure Adhesive Medium viscosity, UV/V light curing medical device adhesive, fluorescing.
Loctite 3974 Light Cure Adhesive Flexible, high viscosity, fluorescing, UV/V light cure acrylic adhesive
LOCTITE 3979 Light Cure Adhesive Gel Acrylic, rapid-curing, UV/visible, non-sag gel
Loctite 3981 Hysol Epoxy Structural Adhesive, High Performance/Various Substrates One-part, heat cure, toughened, highly flourescent, low viscosity epoxy and multiple surface structural adhesive
Loctite 3982 Hysol Epoxy Adhesive, High Performance/Various Substrates One-part, heat cure, toughened, highly flourescent, medium viscosity epoxy
Loctite 3984 Hysol Epoxy Structural Adhesive One-part, heat cure, toughened, highly flourescent, high viscosity epoxy
LOCTITE 401 Surface Insensitive Instant Adhesive Fast curing cyanoacrylate, low / medium viscosity, one part, room temperature cure, surface insensitive instant adhesive.
LOCTITE 4011 Instant Adhesive Low viscosity instant adhesive, surface insensitive, one part, room temperature cure.
Loctite 4013 Prism Instant Adhesive Medium viscosity, one-part room temperature cure, instant adhesive.
Loctite 4014 Prism Instant Adhesive Very low viscosity instant adhesive, one-part room temperature cure.
LOCTITE 403 Instant Adhesive, Low Odor/Low Bloom High viscosity instant adhesive, gap filling, low odor / low bloom, for applications with high cosmetic appearance and/or where vapor control is difficult.
Loctite 4031 Prism Low Odor / Low Bloom Instant Adhesive Very low viscosity instant adhesive, low odor / low bloom, surface insensitive.
LOCTITE 404 Instant Adhesive General maintenance and repair, one part, room temperature cure, instant adhesive.
LOCTITE 406 Instant Adhesive Fast curing cyanoacrylate, one part, room temperature cure, low viscosity instant adhesive.
Loctite 4061 Prism Instant Adhesive Wicking grade, surface insensitive, one part, room temperature cure, low viscosity instant adhesive.
LOCTITE 408 Instant Adhesive, Low Odor / Low Bloom Very low viscosity instant adhesive, low odor / low bloom, one part room temperature cure, wicking grade.
LOCTITE 4081 Low Odor, Low Bloom Instant Adhesive Very low viscosity instant adhesive, low odor / low bloom, one part room temperature cure.
LOCTITE 409 Super Bonder Instant Adhesive Gel General purpose, high viscosity instant adhesive.
LOCTITE 4090 Dispense Nozzle Replacement Loctite equipment, two part dispensing static mix nozzles for epoxy and other two part adhesives.
LOCTITE 4090 Hybrid Adhesive Innovative hybrid adhesive that combines the bond strength and speed you need to solve your design and assembly challenges.
LOCTITE 410 Black Toughened Instant Adhesive High viscosity instant adhesive, black, rubber toughened, one part, room temperature cure.
LOCTITE 411 Prism Instant Adhesive High viscosity instant adhesive, clear toughened, one part, room temperature cure.
Loctite 412 Super Bonder Instant Adhesive Designed for temporary bonding applications
LOCTITE 414 Instant Adhesive General purpose cyanoacrylate adhesive
Loctite 415 Super Bonder Instant Adhesive General purpose adhesive particularly suited to bonding of metal substrates.
LOCTITE 416 Instant Adhesive General purpose cyanoacrylate instant adhesive.
Loctite 4161 Super Bonder Instant Adhesive High viscosity instant adhesive, one-part room temperature cure.
Loctite 417 Super Bonder Instant Adhesive Designed for temporary bonding applications
LOCTITE 420 INSTANT ADHESIVE General purpose, low viscosity instant adhesive, wicking type plastic bonder.
LOCTITE 4203 Instant Adhesive, Thermal Resistant Toughened thermally resistant instant adhesive
Loctite 4204 Prism Instant Adhesive, Thermal Resistant High viscosity instant adhesive, toughened, thermally resistant.
Loctite 4205 Prism Instant Adhesive, Thermal Resistant Gel High viscosity instant adhesive, toughened, thermally resistant
Loctite 4206 Prism Low Odor / Low Bloom Instant Adhesive Instant adhesive for medical device use.
LOCTITE 4210 Thermal Resistant Instant Adhesive Adhesive toughened with elastomers for impact and peel strength along with improved resistance to heat and humidity
LOCTITE 422 Instant Adhesive General purpose, high viscosity instant adhesive / gap filling plastic bonder
LOCTITE 425 Instant Adhesive Threadlocker for small metal and plastic fasteners and tamper-proofing, up to 180°F.
LOCTITE 426 Instant Adhesive, Black/Toughened Gel High viscosity instant adhesive, black, rubber toughened.
Loctite 430 Super Bonder Instant Adhesive General purpose adhesive and is particularly suited to bonding of metal substrates.
Loctite 4304 Medical Device Adhesive High viscosity, flexible, UV/V, light cure adhesive.
LOCTITE 4305 Light Cure Instant Adhesive Light cure instant adhesive designed for bonding applications that require very rapid fixturing, fillet cure or surface cure.
Loctite 4306 Flashcure Light Cure Instant Adhesive Low viscosity instant adhesive, one part, UV/V light fast curing cyanoacrylate.
Loctite 4307 Flashcure Light Cure Instant Adhesive High viscosity instant adhesive, one part, flourescing , UV/V light fast curing cyanoacrylate.
LOCTITE 431 Instant Adhesive High viscosity instant adhesive, gap filling, surface insensitive, one part, fast curing cyanoacrylate.
Loctite 4310 Flashcure Light Cure Instant Adhesive Fast curing cyanoacrylate, toughened, light cure, designed for bonding applications that required a toughened product, very rapid fixturing, fillet cure or surface cure.
Loctite 4311 Flashcure Light Cure Instant Adhesive Fast curing cyanoacrylate, toughened, high viscosity, designed for bonding applications that required a toughened product, very rapid fixturing, fillet cure or surface cure.
LOCTITE 435 Clear Surface Insensitive/Toughened Instant Adhesive Low viscosity instant adhesive, clear, surface insensitive, rubber toughened, one part, room temperature cure.
LOCTITE 438 Toughened Instant Adhesive Low viscosity instant adhesive, black, surface insensitive, rubber toughened, one part, room temperature cure.
Loctite 444 Tak Pak Instant Adhesive Medium viscosity instant adhesive for electronics tacking
LOCTITE 454 Surface Insensitive Instant Adhesive Gel High viscosity instant adhesive, one part, surface insensitive, room temperature cure.
Loctite 4541 Prism Instant Adhesive Gel High viscosity instant adhesive, one part, surface insensitive, room temperature cure.
LOCTITE 455 Low Odor, Low Bloom Instant Adhesive Gel High viscosity instant adhesive, low odor / low bloom, suitable for porous surfaces and vertical or overhead applications.
LOCTITE 460 Instant Adhesive, Low Odor / Low Bloom Low viscosity instant adhesive, low odor / low bloom, one part room temperature cure.
LOCTITE 4601 Low viscosity instant adhesive, low odor / low bloom, one part room temperature cure, designed for applications with high cosmetic appearance and/or where vapor control is difficult.
Loctite 480 Prism Instant Adhesive, Black/Toughened Low viscosity instant adhesive, black, rubber toughened, one part, room temperature cure, designed for bonding metal, rubber and selected plastics.
Loctite 4851 Prism Instant Adhesive, Flexible Medium viscosity, flexible instant adhesive
Loctite 4861 Prism Instant Adhesive, Flexible Flexible, high viscosity instant adhesive.
LOCTITE 4902 Instant Adhesive Highly flexible cyanoacrylate
LOCTITE 4903 Flexible Cyanoacrylate with higher elongation
Loctite 493 Super Bonder Instant Adhesive Particularly suited to bonding of metal substrates.
LOCTITE 495 Instant Adhesive Designed to bond rubber, metal, and plastic parts.
Loctite 496 Super Bonder Instant Adhesive General purpose adhesive and is particularly suited to bonding of metal substrates.
Loctite 498 Super Bonder Instant Adhesive Thermal cycling resistant, a medium viscosity, high temperature product for all metals, and most plastics and rubbers.
Loctite 4981 Super Bonder Instant Adhesive Medium viscosity, thermal cycling, one-part, room temperature cure, instant adhesive.
Loctite 499 Super Bonder Instant Adhesive General purpose adhesive suitable for applications where heat resistance is required
Loctite 5 Minute Bonder Clear, two-component epoxy
LOCTITE 5012 Green Cement LOCTITE® 5012™ Green Cement is a c ontact cement. It can be used as a sealant to bond door and trunk moldings, as well as weatherstripping and headliners.
LOCTITE 503 DRI Pre-applied Sealant A low viscosity, non-toxic, water-based, preapplied thread sealant
Loctite 5031 Nuva-Sil Silicone Light Cure Potting Compound One part, UV or visible light curing, high speed silicone potting compound
Loctite 5039 Nuva-Sil Silicone Light Cure Adhesive / Sealant One part, UV or visible light and moisture curing, high speed silicone
LOCTITE 503HV Pre-Applied Sealant A high viscosity, non-toxic, water-based, preapplied thread sealant
Loctite 504 Gasket Eliminator Flange Sealant Rigid, low viscosity, self-shimming flange sealant - Top Pick
Loctite 5040 Industrial Grade Silicone Adhesive / Sealant Used for potting, coating and sealing of various automotive, military and industrial components.
Loctite 5056 Silicone Light Cure Adhesive / Sealant Self-leveling, high adhesion silicone adhesive sealant
Loctite 5083 Nuva-Sil Silicone Potting Compound One part, dual cure; UV/moisture, acetoxy silicone; thixotropic paste for gasketing, sealing, and bonding
Loctite 5088 Sealant Loctite 5088 is used for potting, coating and sealing of various automotive, electronic, military and industrial components.
LOCTITE 5089 Used for gasketing and sealing applications
LOCTITE 509 Gasket Eliminator Flange Sealant Flexible, medium strength, low pressure flange sealant fluoresces blue - Top Pick
Loctite 5091 Nuva-Sil Silicone Light Cure Potting Compound, High Adhesion One part, dual cure; UV/moisture, acetoxy silicone; low viscosity for potting and encapsulating applications
Loctite 5092 Nuva-Sil A low viscosity, self-leveling, UV curing silicone that provides low outgassing cure characteristics.
LOCTITE 510 Gasket Eliminator Flange Sealant Medium strength, high temperature flange sealant resists low on-line test pressures, uncured - Top Pick
Loctite 5110 Porosity Sealant Electrical grade anaerobic sealant
LOCTITE 5113 Thread Sealant with PTFE Non-hardening, solvent based thread sealant with the added lubricity of PTFE for metal pipes - Top Pick
LOCTITE 5127 Flexible Anaerobic Gasket Flexible anaerobic gasket, flange sealant.
LOCTITE 513 DRI Pre-applied Thread Sealant Low viscosity, high temperature (350ºF), preapplied thread sealant for metal and plastics
LOCTITE 513HV DRI Pre-applied Thread Sealant High viscosity, high temperature (350ºF), preapplied thread sealant for metal and plastics
Loctite 5140 Used for potting, coating and sealing of various automotive, electronic, military and industrial components.
Loctite 5145 Loctite 5145 is designed for bonding, sealing and coating electronic devices.
LOCTITE 515 Gasket Eliminator Flange Sealant Flexible flange sealant for use on rigid machined flanges - Top Pick
LOCTITE 516 DRI Pre-Applied Sealant A high viscosity, non-toxic water-based, preapplied thread sealant
LOCTITE 517 DRI Pre-applied Sealant A low viscosity, non-toxic, water-based, preapplied thread sealant
LOCTITE 518 Gasket Sealant Gasketing Product - excellent contamination tolerance. Ideal for use on rigid iron, steel and aluminum flanges.
LOCTITE 5182 Flexible, solvent resistant flange sealant that will not tear or decay.
LOCTITE 5188 Flange Sealant An ultra-tough, flexible anaerobic flange sealant - Top Pick
Loctite 5192 Loctite® Liquid Optically Clear Adhesives (LOCAs) (with chemistry) silicone
Loctite 5192DM Loctite® Liquid Optically Clear Adhesives (LOCAs) (with chemistry) silicone
LOCTITE 5203 Flange Sealant Seals close fitting joints between rigid metal faces and flanges
LOCTITE 5210 Ultra fast curing, non-corrosive RTV silicone designed for potting, wire tracking, selective sealing, vibration dampening and repair/rework applications on PCB's.
Loctite 5240 Nuva-Sil Silicone Light Cure Adhesive Sealant Self leveling, non-corrosive, UV/moisture silicone with high adhesion for difficult-to-bond substrates
LOCTITE 5248 Medical Device Sealant Light and UV curable silicone for medical device assembly
LOCTITE 5290 Loctite 5290 is a solvent-free, low viscosity, UV/moisture cure silicone suited to brush, dip and selective coating.
LOCTITE 5293 Repairable, solvent-free, medium viscosity, UV / moisture cure silicone suited to brush, dip and selective coating.
LOCTITE 5296 Heat cure silicone that can be applied with brush, dip or spray. High reliability automotive. Clear.
LOCTITE 534 Hi-Tack Gasket Dressing Stick No mess, semi-solid, gasket dressing works with all types of gaskets - Top Pick
LOCTITE 536 Thread Sealant LOCTITE® 536™ is a high performance instant sealant for tapered pipe threads, designed to provide low breakaway torque for ease of disassembly even when the threads are subjected to continuous heat.
LOCTITE 540 Retaining Compound LOCTITE® 540™ is a thixotropic anaerobic sealant designed for sealing core plugs and many other high strength sealing applications where non-migration is desired.
LOCTITE 5404 Self-shimming, heat cure, flexible silicone adhesive paste for demanding parts such as ceramic boards.
LOCTITE 542 Thread Sealant Recommended for sealing the fine threads of hydraulic and pneumatic connectors.
LOCTITE 5421 RTV silicone paste adhesive that provides EMI / RFI shielding on electronic device enclosures.
LOCTITE 545 Hydraulic, Pneumatic Sealant Thread Sealant Specially formulated to offer high lubricity for easy assembly and removal - Top Pick
Loctite 5451 Thread Sealant Low odor formula suited for applications in sensitive areas or confined spaces.
LOCTITE 5452 Fast Cure Thread Sealant Fast cure thread sealant designed for hydraulic / pneumatic fittings - Top Pick
LOCTITE 548 Gasket Eliminator Semi-solid, ideal for on-the-spot gasket repairs
LOCTITE 549 Instant Seal Plastic Gasket Sealant High viscosity, high strength anaerobic adhesive which cures rapidly between metal surfaces.
Loctite 5512 Adhesive / Sealant One part humidity moisture curing elastic adhesive / sealant, silane modified polymer based on Flextec™ Technology.
LOCTITE 554 Refrigerant Sealant Thread Sealant Chemical resistant thread sealant. Recommended for refrigeration systems - Top Pick
LOCTITE 5570 Flexible Adhesive Elastomeric adhesive based on Henkel's proprietary Flextec technology
Loctite 5572 Adhesive One part humidity moisture curing elastic adhesive, silane modified polymer based on Flextec™ Technology.
Loctite 5604 Silicone Adhesive / Sealant Heavy bodied, high strength adhesive & sealant with 10-minute fixture time
Loctite 5605 Silicone Adhesive / Sealant, Grey Two-part silicone adhesive / sealant, 5 minute fixture time
Loctite 5606 Silicone Adhesive / Sealant, Grey Two-part, non-corrosive silicone adhesive & sealant, 10-minute fixture time
LOCTITE 561 Thread Sealant Stick A single component, semisolid anaerobic pipe sealant compound - Top Pick
Loctite 5611 Silicone Potting Compound Self Leveling, NonCorrosive, Flame Retardant Silicone Potting Compound
Loctite 5611F Silicone Potting Compound Self Leveling, NonCorrosive, Flame Retardant Silicone Potting Compound
Loctite 5611S Silicone Sealant A 2-part static-mixable, self-leveling silicone sealant.
Loctite 5613 Silicone Sealant, Black Two-part, oil-resistant silicone. Tack-free in 10 minutes.
Loctite 5620 Silicone Potting Compound, Ultra-Clear Two-part, ultra-clear silicone, 30-minute cure speed
Loctite 5623 Silicone Potting Compound, Ultra-Clear Two-part, ultra-clear, tack-free, non-corrosive silicone potting compound gel
Loctite 5625 Silicone Potting Compound, Ultra-Clear Ultra-clear, soft re-enterable gel silicone potting compound
LOCTITE 564 Low Strength Thread Sealant General purpose thread sealant cures rapidly to provide immediate low pressure sealing - Top Pick
LOCTITE 565 Controlled Strength Thread Sealant General purpose instant sealer for metal tapered and straight/tapered pipe thread fittings - Top Pick
LOCTITE 567 High Temperature Thread Sealant with PTFE General purpose high temperature thread sealant with excellent solvent resistance, allows easy disassembly
LOCTITE 569 Hydraulic Sealant Thread Sealant High strength hydraulic sealant.
Loctite 572 Thread Sealant A low strength sealant with moderate fixture speed for use on coarse threads.
LOCTITE 573 Flange Sealant Medium strength sealant that seals close fitting joints between rigid metal faces and flanges.
LOCTITE 574 Flange Sealant Fast curing, flange sealant.
LOCTITE 577 Thread Sealant Medium strength, general purpose sealant for use on coase-threaded components.
LOCTITE 5770 High Temperature Thread Sealant Designed to seal threaded pipe fittings in applications requiring continuous heat resistance up to 530° F (277° C). - Top Pick
Loctite 5772 Low Halogen, Low Sulfur Thread Sealant Especially developed for use on sensitive metals, like titanium, used in the nuclear industry.
Loctite 579 Thread Sealant A general purpose pipe sealant that cures into a resistant plastic.
Loctite 580 PST Low Halogen, Low Sulfur Thread Sealant Designed for the locking and sealing thread fittings in fossil fuel, solar and hydro power plant piping systems.
Loctite 5802 High Purity Thread Sealant A high purity, low halogen thread sealant formulated to meet the green limit requirements of the nuclear industry - Top Pick
LOCTITE 5810F PA50LBEN/FR High modulus, polyacrylate (ACM), formed-in-place flange sealant with UV tracers, excellent chemical resistance
LOCTITE 592 Slow Cure Thread Sealant High temperature thread sealant that locks and seals threaded fittings.
Loctite 592 Thread Sealant (Automotive Aftermarket Only) Locks and seals threaded fittings
Loctite 5950 Fastgasket Flange Sealant One part UV cure, secondary moisture cure, black
Loctite 5951 Fastgasket Flange Sealant One part UV cure, secondary moisture cure, clear
Loctite 5960 Fastgasket Flange Sealant One part UV cure, fluid resistant
Loctite 5963 Procure Cure-In-Place Gasket Superior compression set resistance cured-in-place gasket, great for power-train applications.
Loctite 5964 Procure Cure-In-Place Gasket Soft silicone, cured-in-place gasket with high elongation, heat or microwave cure
Loctite 5999 Heavy Body, Grey, High Performance RTV Silicone Gasket Maker One part RTV cure silicone for rigid flange assemblies, instant seal, excellent fluid resistance
Loctite 5th Wheel Grease Designed to lubricate 5th wheel top plates of trailer
LOCTITE 6001 Surface Insensitive Retaining Compound Loctite 6001 is designed for the bonding of cylindrical fitting parts.
LOCTITE 603 Retaining Compound Press fit, oil tolerant retaining compound - Top Pick
LOCTITE 609 Retaining Compound General Purpose Low viscosity, rapid-curing retaining compound to augment press fits - Top Pick
LOCTITE 620 Retaining Compound High Temperature Slip fit, high temperature liquid retaining compound - Top Pick
Loctite 635 Retaining Compound Slip fit, high strength, slow cure retaining compound
LOCTITE 638 Maximum Strength Retaining Compound High strength retaining compound.
LOCTITE 640 Retaining Compound High strength, high temperature retaining compound.
LOCTITE 641 Controlled Strength Retaining Compound Controlled strength retaining compound for press and slip fits - Top Pick
Loctite 642 Retaining Compound Medium strength retaining compound, press & slip fits, controlled strength.
LOCTITE 648 High Strength, Rapid Cure Retaining Compound A retaining compound recommended for continuous working temperatures up to 300 degrees F - Top Pick
Loctite 6485 Retaining Compound Halogen-free, low tin anaerobic retaining compound
LOCTITE 660 Retaining Compound A creamy, non-running adhesive/sealant used for repairing worn coaxial parts without remachining - Top Pick
LOCTITE 668 Retaining Compound Semi Solid Stick Revolutionary semi-solid formula, high temperature retaining compound
Loctite 675 Retaining Compound General purpose, low viscosity, self-hardening retaining compound.
LOCTITE 680 High Strength, High Viscosity Retaining Compound High strength, low viscosity slip fit retaining compound - Top Pick
Loctite 6C Hysol Epoxy Adhesive General purpose, bonds and seals, machinable, gap filling, grey epoxy
Loctite 7075 Activator Acetone-based activator that promotes the proper cure of acrylic adhesives
LOCTITE 7091 Primer, Activator LOCTITE® 7091™ is a reactive monomer based "solvent free" primer for use with LOCTITE® anaerobic products for difficult to bond applications where galvanized steel or zinc electroplated surfaces are involved.
LOCTITE 713 Medical Device Adhesive Accelerator Increases cure speed of instant adhesives when your application requires a fast curing cyanoacrylate.
Loctite 7380 Depend Solventless Activator Solvent-free activator allowing the immediate mating of parts
LOCTITE 7387

Activator designed to initiate the cure of LOCTITE toughened acrylic adhesives such as LOCTITE 315, 383 & 384.

Loctite 7451 Prism Medical Device Adhesive Accelerator Increases cure speed of instant adhesives when your application requires a fast curing cyanoacrylate and has aggressive cleaning properties.
Loctite 7453 Tak Pak Accelerator Loctite 7453 has been formulated with "cleanroom" grade acetone for applications in the electronics industry.
Loctite 7805 Hysol Hot Melt Adhesive Polyamide based, hot melt adhesive for bonding to a wide variety of substrates
Loctite 793 Prism Primer Adhesion promoter, non-flammable, for instant adhesives on hard-to-bond plastics and elastomers
LOCTITE 7951 Primer Adhesion promoter, non-flammable, non-combustible, for instant adhesives on hard-to-bond plastics and elastomers
Loctite 9412 Hysol Epoxy Adhesive General purpose, self leveling, flowable, potting, flexible, 65 minute working life epoxy
Loctite 9430 Hysol Epoxy Structural Adhesive, High Strength Toughened, light paste, high peel, high shear strength, 40 minute working life epoxy, multiple surface structural adhesive
Loctite 9432NA Hysol Epoxy Structural Adhesive, Non-Sag One-part paste, heat-cure, excellent high temperature performance and chemical resistance, non-sag, surface insensitive epoxy, multiple surface structural adhesive
Loctite 9433 Hysol Epoxy Adhesive High strength, flowable, self-leveling, toughened, high peel resistance epoxy
Loctite 9459 Hysol Epoxy Structural Adhesive One-part medium viscosity, heat-cure, excellent high temperature performance and chemical resistance, self-leveling, white epoxy, multiple surface structural adheisve
Loctite 9460 Hysol Epoxy Structural Adhesive, Non-Sag Impact resistant, high viscosity, high peel, high shear strength, non-sag, 40 minute working life epoxy, multiple surface structural adhesive
Loctite 9460F Hysol Epoxy Adhesive Impact resistant, high viscosity, high peel, high shear strength, non-sag, 20 minute working life epoxy
Loctite 9460PB Hysol Epoxy Adhesive Impact resistant, high viscosity epoxy, high peel, high shear strength, non-sag, extended 100 minute working life for bonding printing blanket stock
Loctite 9462 Hysol Epoxy Structural Adhesive Impact resistant, toughened, non-sag, medium viscosity epoxy multiple surface structural adhesive with a 55 minute working life
Loctite A 304-10-1 Loctite A 304-10-1 is a one component, heat cured epoxy adhesive.
Loctite A 304-26 Loctite A-304-26 is single component, pourable heat cure epoxy with excellent thermal stability and resistance to many chemicals.
Loctite A 304-29 Loctite A-304-29 is single component, pourable heat cure epoxy with excellent thermal stability and resistance to many chemicals.
Loctite A 316-30 Loctite A-316-30 is single component, thixotropic (non-sagrheology), heat cure epoxy with excellent thermal stability and resistance to many aggressive and harsh chemicals.
Loctite A 316-43
Loctite A-329-14 High Viscosity (Thixo), High Strength
Loctite A-533 Structural Adhesive Ultra-fast fixture, multiple surface structural adhesive
Loctite A-534R Activator Solvent-free activator
Loctite A-633 Structural Adhesives Medium fixture time, external mix acrylic
Loctite A-671 Structural Adhesive Two-step acrylic, toughened adhesive that combines ease of use with a high level of performance.
Loctite A-6750 Structural Adhesive Two-step acrylic, toughened structural adhesive
LOCTITE AA 3106 Light Cure Adhesive An acrylic, high strength, medium viscosity, thixotropic UV/V light cure adhesive.
LOCTITE AA 312 Structural Adhesive Two-step acrylic, no-mix, ultra fast fixturing, low viscosity adhesive
LOCTITE AA 331 Structural Adhesive Two-step acrylic, toughened, activator-cure structural adhesive.
LOCTITE AA 3321 Light Cure Adhesive Medium viscosity, slightly flexible, UV/V light cure adhesive.
LOCTITE AA 350 LC Adhesive sealant
LOCTITE AA 3525 Light Cure Adhesive Acrylic, high viscosity, UV/V light cure adhesive.
LOCTITE AA 3552 Indigo Light Cure Adhesive Low viscosity, fluorescing, visible light cure medical device adhesive.
LOCTITE AA 3553 Indigo Light Cure Adhesive High viscosity, fluorescing, visible light cure adhesive.
LOCTITE AA 3554 Indigo Light Cure Adhesive Acrylic, low viscosity, fluorescing, visible light cure adhesive.
LOCTITE AA 3555 Indigo Light Cure Adhesive Acrylic, medium viscosity, fluorescing, visible light cure adhesive.
Loctite AA 3556 Indigo Light Cure Adhesive Acrylic, high viscosity, fluorescing, visible light cure medical device adhesive.
LOCTITE AA 3851 LC UV structural adhesive
LOCTITE AA 3924 LC Medium viscosity, fluorescing, UV/V light curing medical device adhesive with sterilization resistance.
LOCTITE AA 5251 A 120 L EN An acrylic cured-in-place gasket that cures 100% by UV light.
LOCTITE AA 5810A High modulus, polyacrylate (ACM), formed-in-place flange sealant with excellent chemical resistance
LOCTITE AA H3151 TWO-PART ACRYLIC Metal bonder, medium viscosity, medium fixture time, two-part acrylic
LOCTITE AA H4100 Plastic/composite bonder with an ultra-fast fixturing acrylic structural adhesive
LOCTITE AA H4500 Speedbonder Structural Adhesive, Metal Bonder Two-part acrylic metal bonder, low viscosity, with a fast fixture time
LOCTITE AA H4800 Speedbonder Structural Adhesive, Toughened Acrylic plastic/composite bonder, extended fixture time, toughened
LOCTITE AA H8000 Structural Adhesive, Fast Fixture Acrylic, high toughness, aluminum bonder, with a medium fixture time
LOCTITE AA H8600 Structural Adhesive Acrylic high performance, galvanized steel bonder, with an extended fixture time
LOCTITE ABLELOC 5500SB tape adhesive LOCTITE ABLELOC 5500SB is a tape adhesive for high speed operations.
LOCTITE ABLESTIK 104 A two component, heat cure, epoxy paste adhesive with outstanding physical and dielectric properties and service temperatures up to 230°C.
LOCTITE ABLESTIK 16-1 A two-component, electrically conductive epoxy adhesive designed for general purpose applications. It cures at room temperature while providing a reasonable work life.
LOCTITE ABLESTIK 2000 Electrically conductive die attach adhesive is designed for Pb-free PBGA and Array BGA packaging.
LOCTITE ABLESTIK 2000B Electrically conductive die attach paste adhesive is designed for Pb-free PBGA and Array BGA packaging. 
LOCTITE ABLESTIK 2000T High thermal conductivity adhesive. Low bleed on silver substrates.
LOCTITE ABLESTIK 2025D A hybrid chemistry die attach paste adhesive designed for PBGA.
LOCTITE ABLESTIK 2025DSI Non-conductive low bleed adhesive.
LOCTITE ABLESTIK 2030SC Die attach adhesive has been formulated for use in high throughput die attach applications.
LOCTITE ABLESTIK 2035SC Non-conductive die attach adhesive has been formulated for use in high throughput die attach applications.
LOCTITE ABLESTIK 2053S Low stress paste adhesive for die-to-substrate applications.
LOCTITE ABLESTIK 2100A An ultra low moisture absorption paste adhesive for lead-free packaging.
LOCTITE ABLESTIK 2106 BIPAX Two component epoxy is designed for high strength structural bonding applications.
LOCTITE ABLESTIK 2106T BIPAX Two component epoxy designed for high strength structural bonding applications.
LOCTITE ABLESTIK 2115 Excellent choice for bonding optical where alignment accuracy is essential.
LOCTITE ABLESTIK 2116 BIPAX A thixotropic, low vapor pressure, room temperature cure, epoxy paste system that passes the NASA Outgassing Specification.
LOCTITE ABLESTIK 2151 Thixotropic two part, room temperature cure, paste adhesive.
LOCTITE ABLESTIK 2158 BIPAX Two part adhesvie that develops strong, durable high impact bonds at room temperature which improve heat transfer while maintaining electrical insulation.
LOCTITE ABLESTIK 2300 An ultra low moisture absorption, low stress paste adhesive.
LOCTITE ABLESTIK 2310 LOCTITE ABLESTIK 2310 Is a conductive die attach adhesive.
LOCTITE ABLESTIK 2332 One component, low temperature, high strength paste adhesive.
LOCTITE ABLESTIK 2332-17 A solventless one component epoxy adhesive that develops high bond strength when cured at temperatures as low as 100 to 130°C.
LOCTITE ABLESTIK 2600AT High thermal conductivity adhesive for thermal management applications
LOCTITE ABLESTIK 2700B Very high thermal conductivity adhesive with excellent bleed performance on gold.
LOCTITE ABLESTIK 2700HT Die attach is desgined for Pb-free array packaging. This adhesive is ideal for small needle dispensing in SIP or MCM die attach applications.
LOCTITE ABLESTIK 281 A one component filled thixotropic paste,
LOCTITE ABLESTIK 282 One component, silk screenable, heat cure, viscous epoxy paste adhesive with high thermal conductivity.
LOCTITE ABLESTIK 285 A highly filled, thermally conductive, thixotropic epoxy paste with low CTE.
LOCTITE ABLESTIK 2902 Designed for electronic bonding and sealing applications that require a combination of good mechanical and electrical properties.
LOCTITE ABLESTIK 2958 Two part epoxy
LOCTITE ABLESTIK 3230 Electrically conductive die attach adhesive is designed for high reliability package applications.
LOCTITE ABLESTIK 3230A Adhesive die attach is designed for semiconductor packaging applications where high electrical conductivity is not required. It can be used in a variety of package sizes.
LOCTITE ABLESTIK 3290 Snap curable, electrically conductive die attach adhesive designed for lead-free applications where high reliability is a key requirement.
LOCTITE ABLESTIK 342-37 LOCTITE ABLESTIK 342-37 epoxy adhesive is designed for applications requiring outstanding thermal shock properties.
LOCTITE ABLESTIK 3880 General conductive paste adhesive designed for bonding of metals, ceramics, rubbers and plastics as used in electronic parts, where good adhesion combined with electrical and thermal conductivity is required.
LOCTITE ABLESTIK 3888 Room temperature cure adhesive for applications requiring a combination of good mechanical and electrical properties.
LOCTITE ABLESTIK 45 BK A two component, room temperature curing, variable flexibility epoxy paste adhesive.
LOCTITE ABLESTIK 5020K A high purity adhesive film with excellent adhesion to gold-plated surfaces, particularly suited for use in hermetic packages.
LOCTITE ABLESTIK 5025E Unsupported, epoxy adhesive film
LOCTITE ABLESTIK 550 Supported, high strength adhesive film
LOCTITE ABLESTIK 550K Combines high adhesion strength with very good thermal conductivity in a fiberglass supported film adhesive.
LOCTITE ABLESTIK 551 Flexible unsupported adhesive film is designed to produce tough, resilient bonds between materials with differing coefficients of thermal expansion. It is also useful for bonding thin, flexible materials where good peel strength is required.
LOCTITE ABLESTIK 561 Thermally conductive epoxy film designed for bonding materials with mismatched coefficients of thermal expansion.
LOCTITE ABLESTIK 561K Supported, thermally conductive dielectric adhesive film.
LOCTITE ABLESTIK 563K Supported, thermally conductive dielectric adhesive film.
LOCTITE ABLESTIK 566K Low temperature cure in a thermally conductive adhesive with excellent flexibility and adhesion.
LOCTITE ABLESTIK 566KAP Heat cure epoxy film.
LOCTITE ABLESTIK 56C-CAT 11 KIT Electrically conductive paste adhesive.
LOCTITE ABLESTIK 57C Two component, room temperature cure, paste adhesive.
LOCTITE ABLESTIK 59C Two component, flexible, low temperature cure paste adhesive.
LOCTITE ABLESTIK 60L Parts AB carbon filled epoxy adhesive LOCTITE ABLESTIK 60L Parts AB is a carbon filled epoxy adhesive with low electrical conductivity designed for general pupose bonding.
LOCTITE ABLESTIK 6200 B-stageable printable paste with low moisture uptake and bleed.
LOCTITE ABLESTIK 6202C-X Die attach adhesive.
LOCTITE ABLESTIK 724-14C One component, low temperature stability, room temperature cure paste adhesive.
LOCTITE ABLESTIK 8006NS Non-conductive oven cure adhesive utilizing wafer backside coating technology.
LOCTITE ABLESTIK 8008 LOCTITE ABLESTIK 8008 is an electrically conductive snap cure adhesive utilizing wafer backside coating technology.
LOCTITE ABLESTIK 8008HT HIgh thermal conductivity snap cure adhesive utilizing wafer backside coating technology.
LOCTITE ABLESTIK 8008MD Electrically and thermally conductive die-attach.
LOCTITE ABLESTIK 8175 A general conductive, screen printable thermal conductive paste adhesive.
LOCTITE ABLESTIK 8175Q Electrically conductive, paste adhesive designed for solder replacement in microelectronic interconnect applications
LOCTITE ABLESTIK 8177 Screen printable, thermal conductive, paste adhesive.
LOCTITE ABLESTIK 8200C Electrically conductive die attach adhesive is designed for high reliability package applications with medium thermal and electrical requirements.
LOCTITE ABLESTIK 8200TI Higher thermal conductivity and optimized adhesion on NiPdAu leadframe.
LOCTITE ABLESTIK 8290 A low stress die attach adhesive suitable for die size <200 mil.
LOCTITE ABLESTIK 8340-O LOCTITE ABLESTIK 8340-O is an electrically conductive die attach adhesive designed for high reliability lead frame packaging applications.
LOCTITE ABLESTIK 8350M This electrically conductive one component die attach adhesive has been formulated for use in high throughput die attach applications.
LOCTITE ABLESTIK 8350R A snap curable die attach adhesive designed to provide anti-delamination and package reliability.
LOCTITE ABLESTIK 8352L A high electrical and thermal conductivity die attach adhesive.
LOCTITE ABLESTIK 8384 Die attach adhesive is designed for smart card applications.
LOCTITE ABLESTIK 8387A LOCTITE ABLESTIK 8387A is a non-conductive die attach adhesive designed for high throughput smart card bonding applications.
LOCTITE ABLESTIK 8387B Non-conductive die attach adhesive has been formulated for use in high throughput die attach applications.
LOCTITE ABLESTIK 8387B-1B2 Non-conductive die attach adhesive.
LOCTITE ABLESTIK 8387BS Single component die attach adhesive designed for high throughput bonding applications.
LOCTITE ABLESTIK 8387BSW LOCTITE ABLESTIK 8387BSW is a single component, non-conductive adhesive designed for high throughput bonding applications.
LOCTITE ABLESTIK 84-1A Adhesive for high volume semiconductor applications, fast cure.
LOCTITE ABLESTIK 84-1LMI Enhanced thermal conductivity, fast cure, general conductive, low stress die & component attach adhesive paste.
LOCTITE ABLESTIK 84-1LMISR3 Is an electrically conductive adhesive is designed for die attach applications. It is a low viscosity and higher thixotropic index version of ABLEBOND 84-1LMIS.
LOCTITE ABLESTIK 84-1LMISR4 Industry standard die attach paste adhesive.
LOCTITE ABLESTIK 84-1LMISR4-S25 Electrically conductive die attach adhesive.
LOCTITE ABLESTIK 84-1LMISR8 Electrically conductive adhesive.
LOCTITE ABLESTIK 84-1LMIT1 A general conductive, low stress thermal conductive paste adhesive.
LOCTITE ABLESTIK 84-3 Electrically non-conductive adhesive pastes for screen printing, dispensing and insulating applications.
LOCTITE ABLESTIK 85-1 A general conductive, gold-filled, high reliability conductive paste adhesive for critical applications.
LOCTITE ABLESTIK 8700E Dispensible, fast curing, general conductive, paste adhesive and meets the requirements of MIL-STD-883, Method 5011.
LOCTITE ABLESTIK 8700K One component, heat cure, dispensible paste adhesive and meets the requirements of MIL-STD-883, Method 5011.
LOCTITE ABLESTIK 8900NC Non-conductive die attach adhesive.
LOCTITE ABLESTIK 927-10 Epoxy adhesive for medical applications.
LOCTITE ABLESTIK 958-11 One component, low stress paste adhesive.
LOCTITE ABLESTIK 965-1L  An electrically conductive epoxy die attach designed for bonding large die integrated circuits with mismatched coefficients of thermal expansion.
LOCTITE ABLESTIK 967-1 Two components, low temperature cure paste adhesive.
LOCTITE ABLESTIK 967-3 Two components, low temperature cure, paste adhesive.
LOCTITE ABLESTIK 969-1 Is an electrically conductive preimidized adhesive designed for semiconductor die attach. It is not recommended for use in hermetic packages.
LOCTITE ABLESTIK A 312-20 One component, flexible, fast cure
LOCTITE ABLESTIK A164-1 Heat cure epoxy paste adhesive
LOCTITE ABLESTIK A316 A series epoxy adhesive and sealant is designed for high throughput assembly operations.
LOCTITE ABLESTIK A401 Good thermal conductivity; good high temperature resistance paste adhesive - bonds well to metal, glass, plastics and ceramics.
LOCTITE ABLESTIK AAA 3131A LOCTITE ABLESTIK AAA 3131A die attach is electrically and thermally conductive recommended for package types which require very low electrical resistivity. It is snap curable or heat curable. It is designed for leadframe applications.
LOCTITE ABLESTIK ABP 2030SCR Conductive die attach adhesive
LOCTITE ABLESTIK ABP 2100AC LOCTITE ABLESTIK ABP 2100AC die attach adhesive is designed for Pb-free array packaging.
LOCTITE ABLESTIK ABP 2501 LOCTITE ABLESTIK ABP 2501 is a die attach formulated for use in high throughput die bonding applications. Used in smart card applications.
LOCTITE ABLESTIK ABP 8060T Electrically die attach paste.
LOCTITE ABLESTIK ABP 8062T LOCTITE ABLESTIK ABP 8062T electrically conductive die attach paste.
LOCTITE ABLESTIK ABP 8064T LOCTITE ABLESTIK ABP 8064T highly filled, conductive die attach adhesive.
LOCTITE ABLESTIK ABP 8611 Adhesive is designed for die attach applications as well as component attach.
LOCTITE ABLESTIK ACP 3122 Anisotropic epoxy adhesive is designed for high throughput microelectronics assembly applications.
LOCTITE ABLESTIK ATB 105US Non-conductive die attach film (5 µm).
LOCTITE ABLESTIK ATB 110A Non Conductive DDF: DAX film (10 µm).
LOCTITE ABLESTIK ATB 110U Non Conductive DDF: DAX (10 µm)
LOCTITE ABLESTIK ATB 115US  Non Conductive DDF: DAX (15 µm).
LOCTITE ABLESTIK ATB 120 Non-conductive die attach film (20 µm).
LOCTITE ABLESTIK ATB 120A Non Conductive DDF: DAX film (20 µm).
LOCTITE ABLESTIK ATB 120U Non Conductive DDF: DAX (20 µm)
LOCTITE ABLESTIK ATB 125US Non Conductive DDF: DAX (25 µm).
LOCTITE ABLESTIK ATB 130 Non-conductive die attach film (30 µm).
LOCTITE ABLESTIK ATB 130U Non Conductive DDF: DAX (30 µm)
LOCTITE ABLESTIK ATB F125E Adhesive Film Die Attach.
LOCTITE ABLESTIK C 850-5A 114 An electrically conductive adhesive.
LOCTITE ABLESTIK C100 Series Conductive die attach films. LOCTITE ABLESTIK C115 supplied in 15 micro thickness enables leadframe package manufacturers to realize the advantages film-based products have over traditional paste die attach products. Benefits include the elimination of die tilt, the ability to process thinner die and facilitation of greater bondline control all of which allow for improved processability, higher yields and better long-term reliability.
LOCTITE ABLESTIK C850-6L A general conductive, low viscosity version of C850-6.
LOCTITE ABLESTIK C860-1J Electrically conductive paste adhesive.
LOCTITE ABLESTIK CA 3150 Snap curable, low temperature cure, electrically conductive adhesive with excellent adhesion and reliability of Cu and Al substrates.
LOCTITE ABLESTIK CA3556HF Electrically conductive paste adhesive
LOCTITE ABLESTIK CDF 200 Series Highly filled, conductive die attach film adhesive.
LOCTITE ABLESTIK CDF 800 Series Conductive Die Attach Film Highly filled, conductive die attach adhesive film.
LOCTITE ABLESTIK CE 3103WLV Electrically conductive, tin and tin lead compatible adhesive paste for thin film PV assembly.
LOCTITE ABLESTIK CE 3104WXL Electrically conductive, tin and tin lead compatible, paste adhesive with superior contact resistance stability. Viscosity optimized for screen- and/or stencil-printing.
LOCTITE ABLESTIK CE 3126 Anisotropic adhesive
LOCTITE ABLESTIK CE 3513 Electrically conductive paste adhesive.
LOCTITE ABLESTIK CE 8500 Electrically conductive paste adhesive
LOCTITE ABLESTIK CE3804 Electrically conductive paste adhesive.
LOCTITE ABLESTIK CE3850 One component electrically conductive adhesive is designed for circuit assembly applications.
LOCTITE ABLESTIK CE3920 Dispensible, fast cure, general conductive, Pb-free paste adhesive alternative to solder.
LOCTITE ABLESTIK CF 3350 Adhesive film offers an excellent balance of adhesion strength, electrical and thermal conductivity, and processability. It is especially suited for RF applications.
LOCTITE ABLESTIK CT4042-1 PTA A two component silver-filled, easy to apply, conductive epoxy paste adhesive. It is recommended for chip bonding in microelectronics applications. It is a lower viscosity version of LOCTITE ABLESTIK CT4042 adhesive.
LOCTITE ABLESTIK DX10 Epoxy base clear type. Low viscosity paste adhesive.
LOCTITE ABLESTIK E 3526 Especially developed for ferrite core bonding applications.
LOCTITE ABLESTIK E 8502-1 This is a low modulus, thermally conductive, heat cure epoxy paste adhesive.
LOCTITE ABLESTIK ECF 506 A flexible film adhesive designed for bonding TCE mismatched materials.
LOCTITE ABLESTIK ECF 550 Adhesive is designed for microelectronic applications which require electrical conductivity. When used for substrate attach, this adhesive film acts as an electrical ground plane. In the assembly and sealing of microelectronic packages which require RF shielding, LOCTITE ABLESTIK ECF 550 maintains electrical continuity between joints.
LOCTITE ABLESTIK ECF 561E Supported, electrically and thermally conductive adhesive film.
LOCTITE ABLESTIK ECF 564A Ionically clean, fiberglass supported adhesive with very good thermal conductivity.
LOCTITE ABLESTIK ECF 564AHF1004 Heat cure, electrically conductive epoxy film designed for use in hybrid packages where outgassing and ionic contamination must be kept to a minimum.
LOCTITE ABLESTIK ECF 568 Designed for low temperature cure applications. It has superior adhesion to most surfaces.
LOCTITE ABLESTIK EO 0202 One component, epoxy potting/adhesive compound designed to be crack resistant when used on metal surfaces such as filter endcaps.
LOCTITE ABLESTIK FDA 2 A room temperature cure, thixotropic epoxy adhesive designed for medical device applications.
LOCTITE ABLESTIK FDA 2T A room temperature cure, thixotropic epoxy resin paste system specifically designed for medical device applications.
LOCTITE ABLESTIK FS 849-TI LOCTITE ABLESTIK FS 849-TI is a high thermal conductivity adhesive with low electrical resistance. is a high thermal conductivity adhesive with low electrical resistance.
LOCTITE ABLESTIK G 909 One component snap curable electrically conductive paste adhesive.
LOCTITE ABLESTIK GA2W Single component adhesive is designed for CCD/CMOS die attach bonding applications.
LOCTITE ABLESTIK ICP 3535M1 Electrically conductive adhesive is designed for circuit assembly applications. It is specially recommended for mounting lower cost tin (Sn) finished components onto the conductive trace terminations of printed circuit boards or co-fired ceramic circuitry. Designed for applications with small size components (0603, 0402) where no bleeding or wicking is tolerated. It can be applied by stencil printing.
LOCTITE ABLESTIK ICP 3540 Isotropic conductive paste Electrically conductive isotropic conductive paste designed for circuit assembly applications.
LOCTITE ABLESTIK ICP 3556M1 One component, snap curable electrically conductive adhesive.
LOCTITE ABLESTIK ICP 3601 Electrically conductive epoxy paste
LOCTITE ABLESTIK ICP 3801 LOCTITE ABLESTIK ICP 3801 is a one component electically conductive epoxy .
LOCTITE ABLESTIK ICP 4000 Silicone based, electronically conductive adhesive recommended in mounting small components to a variety of interconnect substrates.
LOCTITE ABLESTIK ICP 4001 Silicone paste is specifically desgined for applications where a high degree of flexibility is required.
LOCTITE ABLESTIK ICP 4298 Silicone based electrically conductive adhesive Silicone based, electrically conductive adhesive.
LOCTITE ABLESTIK ICP 4298-S39 One-component silicone based electrically conductive adhesive.
LOCTITE ABLESTIK ICP CB5424 Isotropic conductive paste.
LOCTITE ABLESTIK LHA 2 Adhesive paste for lens holder attach.
LOCTITE ABLESTIK QMI 5100 Non-conductive 2-in-1 dicing die attach film.
LOCTITE ABLESTIK QMI 5200-1X Adhesive film
LOCTITE ABLESTIK QMI2569  A no-dry Ag/glass die attach for glass, solder and seamed sealed packages. Very high thermal conductivity applications for die as large as 0.80 in 2.
LOCTITE ABLESTIK QMI3555R A no-dry Ag/glass die attach for glass, solder and seamed sealed packages.
LOCTITE ABLESTIK QMI505MT A lower stress BMI based paste for preplated, alloy 42 and black oxide finishes.
LOCTITE ABLESTIK QMI506 A low stress conductive die attach paste for QFP's and TSOP's.
LOCTITE ABLESTIK QMI516 No dry Ag glass die attach for glass, solder and seamed sealed packages.  Very high thermal conductivity and >450°C temperature resistance for glass sealed hermetic packages.
LOCTITE ABLESTIK QMI519 Silver filled conductive adhesive for attachment of integrated circuits and components to metal leadframes advanced substrates.
LOCTITE ABLESTIK QMI529HT Used for component or die attach where very high electrical and thermal conductivity are required.
LOCTITE ABLESTIK QMI529HT-LV LOCTITE ABLESTIK QMI529HT-LV electrically conductive adhesive is designed for die attach applications. It is recommended for use in the attachment integrated circuits and components onto metallic leadframes. 
LOCTITE ABLESTIK QMI536HT(BORON) A high thermal version of QMI536 and is ideal for mixed stacked die applications. Non-die damaging heat cure, die attach filler.
LOCTITE ABLESTIK QMI536NB High JEDEC performance for first die and die-to-die bonding. Non-conductive and non-damaging to the die face. Can be cured as low as 80°c. No bleed.
LOCTITE ABLESTIK QMI536NB-1A5 LOCTITE ABLESTIK QMI536NB-1A5 is a non-conductive die attach paste.
LOCTITE ABLESTIK QMI538NB Non-conductive paste for leadframe applications.
LOCTITE ABLESTIK QMI538NB-1A2 Non-conductive paste for leadframe applications. Very low stress QMI538NB°1A2, 1A3, 1A4 for die sizes greater than 500 x 500 mil. / 13 x 13 mm.
LOCTITE ABLESTIK QMI546 Smooth flowing and easy to use paste for the first die as well as die stacking.
LOCTITE ABLESTIK QMI547 A non-conductive paste for leadframe applications.
LOCTITE ABLESTIK SSP 2020 Silver sintering paste die attach Sintering silver paste die attach.
LOCTITE ABLESTIK SSP-2000 silver sintering paste LOCTITE ABLESTIK SSP-2000 silver sintering paste die attach adhesive for high power devices.
LOCTITE ABLESTIK XCE 3104XL An electrically conductive adhesive with tin compatibility for the stencil and screen print applications.
LOCTITE ABLESTIK XCE 3111 One component, snap curable, electrically conductive paste adhesive.
LOCTITE ABLESTIK XCE 3120 An anisotropic epoxy adhesive designed for high throughput microelectronics assembly applications.
LOCTITE ABLESTIK XCP3302NS ITAR A gold filled, electrically conductive adhesive designed for automatic dispensing operations. It is the no spacer version of XCP3302 adhesive.
LOCTITE ABLESTIK XE 80100 A solventless modified epoxy adhesive that combines low stress with good adhesion on nearly all surfaces and is flexible for mismatched CTE applications. XE80100 is the non-conductive verison of ECCOBOND CE8500 adhesive.
LOCTITE Adhesive Recycling Program Box
LOCTITE All Purpose Spray Adhesive Fast drying, won't shrink or bleed, resists water, and humidity
Loctite All Purpose Spray Adhesive (Automotive Aftermarket Only) Fast drying, won't shrink or bleed, resists water, and humidity
Loctite Aviation Gasket Sealant Slow-drying, non-hardening brushtop, close tolerance flanges, flexible cure for aviation and automotive applications - Top Pick
Loctite Aviation Gasket Sealant (Automotive Aftermarket Only) Slow-drying, non-hardening brushtop for aviation and automotive applications
LOCTITE Axle Tube Sealant An anaerobic sealant specifically designed for sealing axle tubes.
Loctite Bearing Mount Stick (Automotive Aftermarket Only) Low viscosity, rapid-curing retaining compound
Loctite Bearing Mount Stick - High Temperature Revolutionary method to bond non-threaded, cylindrical metal assemblies
Loctite Belt Dressing & Conditioner (Automotive Aftermarket Only) Recommended to prevent slipping and increase friction for all types of belts
Loctite Big Foot Acrylic Pedestrian Grade Single-component, elastomeric, anti-slip, floor and deck coating
Loctite Big Foot Acrylic Primer Single-component, zero VOC, water-based
Loctite Big Foot Flexible Low Profile Exterior Grade Single component, water based anti-slip coating
Loctite Big Foot Heavy Duty Pedestrian Grade For heavy pedestrian or light rolling traffic
Loctite Big Foot Low Profile Pedestrian Grade - Safety Yellow Two-component, self-sealing, non-slip, floor and deck coating
Loctite Big Foot Metal Primer Two-component, epoxy-polymide, metal primer
Loctite Big Foot Vehicular Grade Withstands heaviest rolling traffic and resists harsh liquids
Loctite Big Foot Water Based Primer/Sealer Specially formulated to increase adhesion and coverage of anti-slip coatings
Loctite Big Foot Zero V.O.C. 100% reactive, solvent free epoxy for use in odor-sensitive spaces
Loctite Black Weatherstrip Adhesive (Automotive Aftermarket Only) Professional, black contact adhesive, for weatherstripping and general purpose bonding
Loctite Blue Threadlocker 242 (Automotive Aftermarket Only) Medium strength blue threadlocker.
Loctite Blue Threadlocker Stick - Medium Strength (Automotive Aftermarket Only) Medium strength threadlocker semi-solid stick.
LOCTITE C 11054 E&C Electrically conductive epoxy coating.
LOCTITE C 400 LOCTITE C 400 Flux Cored Wire Halide-free, no-clean, clear residue, increased flux content for improved wetting.
LOCTITE C 502 Solder materials -Cored Wire
LOCTITE C 511 LOCTITE C 511 cored solder wire has been specially formulated to compliment no clean wave and reflow soldering processes.
LOCTITE C 910-3 E&C Epoxy based, nickel plateable termination coating recommended for use in the assembly of passive components.
LOCTITE C110 Is an electrically conductive epoxy coating.
LOCTITE CAT 11 Catalyst used with Stycast resins.
LOCTITE CAT 11 LOCTITE CAT 11 epoxy encapsulant is designed for general potting applications.
LOCTITE CAT 14 Catalyst 14 encapsulant
LOCTITE CAT 15-1 CLEARJ Designed for use with potting and encapsulating resins.
LOCTITE CAT 15-1 LV Designed for use with potting and encapsulating resins.
LOCTITE CAT 23LVJ Catalyst used with Stycast resins.
LOCTITE CAT 24LV Encapsulant designed for general potting applications.
LOCTITE CAT 27-1 Two component, electrically insulating general purpose encapsulant.
LOCTITE CAT 9 LOCTITE CAT 9 epoxy encapsulant designed for general potting applications.
Loctite Clover Reel Sharpening Compound Paste for fast metal removal, biodegradeable.
Loctite Clover Silicon Carbide Grease Mix Standard abrasive paste for fast metal removal
Loctite Clover Silicon Carbide Pat Gel Water Mix Water mix paste, for fast metal removal. Biodegradeable.
Loctite Color Guard Primer Loctite® Color Guard® surface pretreatment
Loctite Color Guard Thinner Color guard thinner for rubber coating
Loctite Copper Gasket Adhesive Fast drying, metallic copper sealant, improved heat transfer, fills surface imperfections, repositionable - Top Pick
LOCTITE CP8825 Electrically conducting, acrylic silver coating.
LOCTITE CR 3588 Medical Device Adhesive High viscosity, flexible, UV/V, light cure adhesive.
LOCTITE CR 37 LOCTITE CR 37 solder paste is suitable for most assembly processes.
LOCTITE CR32 LOCTITE CR32 is a no clean, type L solder paste, It has been formulated as a modest residue level product for printing and reflow in air. CR32 solder pastes offer excellent open time and soldering activity with pale post-soldering residues.
LOCTITE CT 5030 E&C LOCTITE CT 5030 E&C is a conductive ink designed to provide thin coating used in shielding and grounding applications.
LOCTITE D 125 F DR A surface mound adhesive designed for use in high-speed pneumatic and positive displacement dispensers.
Loctite D609 Hysol Epoxy Adhesive Fast setting, clear, medium viscosity, electrically insulative, chemical resistant epoxy multiple surface structural adhesive
LOCTITE DAG 1050 E&C Water based graphite coating/additive.
Loctite Dielectric Tune-Up Grease Provides moisture proof barrier with a high dielectric strength.
Loctite Dielectric Tune-Up Grease (Automotive Aftermarket Only) Provides moisture proof barrier with a high dielectric strength.
Loctite Disc Brake Quiet Stick (Automotive Aftermarket Only) Specially formulated to dampen brake pad vibrations and eliminate associated squeaking and noise.
LOCTITE DRI 200 Threadlocker High strength, preapplied threadlocker
LOCTITE DRI 201 Threadlocker High strength preapplied threadlocker with temperature performance up to 400ºF.
LOCTITE DRI 2020 BL Threadlocker / Thread Sealant Low to medium strength, preapplied threadlocker designed for brass.
LOCTITE DRI 203 Threadlocker Low strength, preapplied threadlocker designed for fasteners with phosphate and oil coatings.
LOCTITE DRI 204 Threadlocker High strength, preapplied threadlocker designed for fasteners with plated surfaces.
LOCTITE DRI 2045 Pre-applied Threadlocker High strength, preapplied threadlocker designed for plated fasteners and with temperature performance up to 400ºF.
LOCTITE DRI 205 Threadlocker High strength, preapplied threadlocker with high lubricity.
LOCTITE DRI CAPSULAR P3 Activator Preapplied threadlocker activator, large microcapsules for fasteners M6 and larger.
LOCTITE DRI MICROCAPS P2 Activator Preapplied threadlocker activator, small microcapsules, excellent for all size fasteners.
LOCTITE DRI STS Pre-applied Threadlocker / Thread Sealant Medium strength, preapplied threadlocker and thread sealant with excellent lubricity.
LOCTITE Dual Cartridge Manual Applicator The Dual Cartridge Manual Applicator is a hand-held, manually operated meter-mix dispenser.
Loctite E 359 High Temp. Resistance, High Strength, Low Off Gas
LOCTITE E 6752 A one component, low temperature cure, surface mount adhesive that can be applied easily without stringing.
Loctite E-05MR Hysol Epoxy Structural Adhesive Clear, two-component, fast room temperature curing epoxy multiple surface structural adhesive.
Loctite E-119HP Hysol Epoxy Structural Adhesive A one-component, heat cure epoxy structural adhesive
Loctite E-214HP Hysol Epoxy Structural Adhesive, High Strength One-part, heat cure, high temperature resistant, non-sag, grey epoxy
Loctite E-30UT Hysol Epoxy Structural Adhesive A two-component room temperature curing epoxy, multiple surface structural adhesive
Loctite E-40EXP Hysol Epoxy Potting Compound Epoxy potting compound designed to comply with UL-674 requirements for explosion-proof electric motors.
Loctite E-40HT Hysol Epoxy Structural Adhesive Two-component toughened, multiple surface structural adhesive
Loctite E-50CR Hysol Epoxy Structural Adhesive A flowable, two-component, extended room temperature curing epoxy, multiple surface structural adhesive
Loctite E-7570 Epoxy Structural Adhesive A one-component, heat cure epoxy, multiple surface structural adhesive
Loctite E-910 Epoxy Adhesive One-component, heat-cure epoxy
LOCTITE EA 0151 Epoxy General purpose, ultra clear epoxy paste and multiple surface structural adhesive
LOCTITE EA 193124 A 5 GA EN Provides structural strength and flexible potting characteristic
LOCTITE EA 2000 AERO Nitrile / phenolic, water based primer
LOCTITE EA 3336 LIGHT CURE EPOXY Semi-rigid, two-part, medium viscosity epoxy, curable at room temperature or with heat
LOCTITE EA 3463 Metal Magic Steel Steel epoxy in stick form
LOCTITE EA 3471 Steel Putty Non-slumping, two-part, steel-filled putty
LOCTITE EA 3472 Steel Liquid Pourable, self-leveling, steel liquid epoxy
LOCTITE EA 3473 Fast Set Steel Putty Fast setting steel putty. Sets in 3 minutes.
LOCTITE EA 3476 Stainless Steel Putty Stainless steel filled steel putty
LOCTITE EA 3478 Superior Metal Non-rusting, ferro-silicone-filled epoxy
LOCTITE EA 3985 Hysol Epoxy Adhesive, Non-sag One-part, heat-cure, toughened, non-sag, high viscosity, motor armature bonding epoxy, multiple surface structural adhesive
LOCTITE EA 445 Fast Cure Epoxy Mixer Cups General purpose epoxy. Sets in 5 to 15 minutes.
LOCTITE EA 608 Epoxy Structural Adhesive, High Strength Fast setting, high strength, medium viscosity, low odor, clear epoxy, multiple structural adhesive
LOCTITE EA 615 Epoxy Structural Adhesive, Sandable Fast setting, sandable, gap filling, high viscosity, blue epoxy, multiple surface structural adhesive
LOCTITE EA 907 Epoxy Adhesive General purpose, mix ratio insensitive, surface intolerant, 20 minute working life epoxy
LOCTITE EA 9131 General Purpose Epoxy Mixer Cups General purpose epoxy. Sets in 5 to 15 minutes.
LOCTITE EA 9153 TWO-PART EPOXY 15-minute, two-part adhesive and filler system, eliminates the need for welding or brazing
LOCTITE EA 9203 AERO Adhesion promoting coating, room temperature cure
LOCTITE EA 9309.3NA AERO Toughened paste, high peel, two component, ambient cure, 180°F/82°C service
LOCTITE EA 9309NA AERO LOCTITE EA 9309NA AERO is a toughened epoxy paste adhesive ideal for bonding metal, wood, plastics and glass.
LOCTITE EA 9313 AERO Toughened paste, high peel, two component, ambient cure, 180°F/82°C service
LOCTITE EA 9320NA AERO Toughened paste, high peel, two component, ambient cure, 180°F/82°C service
LOCTITE EA 9321 AERO Filled paste, 250°F/121°C service temperature, ambient cure
LOCTITE EA 9323 AERO

LOCTITE EA 9323 is a filled paste, 250°F/121°C service temperature, ambient cure

LOCTITE EA 9330 AERO Toughened paste, thixotropic, 180°F/82°C service
LOCTITE EA 9330.3 AERO Toughened paste, thixotropic, 180°F/82°C service
LOCTITE EA 9340 Epoxy Structural Adhesive, High Temperature High temperature and chemical resistant, high viscosity, multiple substrate bonder, 90 minute working life epoxy, multiple surface structural adhesive
LOCTITE EA 934NA AERO Filled paste, 300°F/149C service temperature, ambient cure
LOCTITE EA 9359.3 AERO Toughened paste, high peel strength, volumetric mix ratio, 200°F/93°C service temperature
LOCTITE EA 9360 AERO Toughened paste, high peel strength, volumetric mix ratio, 200°F/93°C service temperature
LOCTITE EA 9377 AERO Filled paste, liquid shim, non-microcracking
LOCTITE EA 9380 AERO Toughened paste 250°F/121°C service temperature, structural
LOCTITE EA 9390 AERO Low viscosity resin, composite repair, laminating, 350°F/177°C service temperature.
LOCTITE EA 9392 AERO Toughened paste, 350°F/177°C service temperature, thixotropic
LOCTITE EA 9394 AERO Filled paste adhesive, thixotropic, liquid shim, 350°F/177°F service temperature, low peel
LOCTITE EA 9394.2 AERO Filled paste, liquid shim, fast cure, 225°F/107°C service temperature
LOCTITE EA 9394C-2 AERO Filled paste, elevated cure, 450°F/232°C service temperature, high temperature
LOCTITE EA 9395 AERO Non-metallic filled paste adhesive, thixotropic, liquid shim, 350°F/177°F service, low peel
LOCTITE EA 9396 AERO Low viscosity resin, 350°F/177°C service temperature, composite repair resin, room temperature cure
LOCTITE EA 9396.6MD AERO Syntactic low density paste, 300°F/149°F service, room temperature cure, lightweight
LOCTITE EA 9480 Underwater Repair Epoxy Underwater repair epoxy; ideal for plumbing, irrigation and marine applications
LOCTITE EA 956 AERO Low viscosity resin, 300°F/149°C service temperature, repair resin, room temperature cure
LOCTITE EA 9628 AERO Metal bond film adhesive, 250°F/121°C service temperature
LOCTITE EA 9628H AERO Metal bond film adhesive, 250°F/121°C service temperature
LOCTITE EA 9658 AERO Film adhesive, high temperature, 420°F/216°C service temperature
LOCTITE EA 9673 AERO Bismalimide film adhesive, 550°F/288°C service temperature
LOCTITE EA 9686 AERO Film adhesive, 250°F/121°C cure, 300°F/149°C service temperature
LOCTITE EA 9695 AERO Film adhesive, composite bonding, 300°F/149°C service temperature
LOCTITE EA 9696 AERO Film adhesive, metal or composite bond
LOCTITE EA 9895 AERO Peel ply, pre-impregnated, polyester scrim
LOCTITE EA 9896 AERO Resin impregnated nylon peel ply used for the surface preparation of composite substrates.
LOCTITE EA A-304-6 General Purpose
LOCTITE EA A-316 General Purpose Good Solvent Resistance
LOCTITE EA A-316-20 General Purpose with Skydrol Resistance
LOCTITE EA E-00CL Epoxy Structural Adhesive, Low Odor Fast setting, flowable, low odor, clear, low viscosity epoxy multiple surface structural adhesive
LOCTITE EA E-00NS Epoxy Structural Adhesive, Non-Sag Fast setting, controlled flow, non-sag, low odor, translucent epoxy multiple surface structural adhesive
LOCTITE EA E-04SS Epoxy Adhesive and Sealer Seam sealing epoxy adhesive
LOCTITE EA E-05CL Epoxy Structural Adhesive Fast setting, toughened, high peel, clear, low viscosity, low odor epoxy multiple surface structural adhesive
LOCTITE EA E-120HP Epoxy Adhesive High performance, ultra-strength, non-sag, aerospace grade epoxy with a 120 minute working life
LOCTITE EA E-20HP Epoxy Structural Adhesive High performance, ultra-strength, non-sag, aerospace grade epoxy multiple surface structural adhesive with a 20 minute working life
LOCTITE EA E-20NS Epoxy Structural Adhesive High temperature, non-sag, high peel, high shear, 20 minute working life, metal bonder
LOCTITE EA E-30CL Epoxy Structural Adhesive General purpose, low viscosity, impact resistant, ultra clear glass bonder, multiple surface structural adhesive, 30 minute working life
LOCTITE EA E-40FL Epoxy Structural Adhesive General purpose, flexible, impact resistant, grey epoxy, multiple surface structural adhesive with a 40 minute working life
LOCTITE EA E-60HP Epoxy Structural Adhesive High strength, toughened, high peel, high shear, off-white epoxy, multiple surface structural adhesive with a 60 minute working life
LOCTITE EA E-60NC Epoxy Structural Adhesive

General purpose, Corrosion free, High performance black epoxy, low viscosity, extended worklife.

LOCTITE EA E-90FL Epoxy Structural Adhesive General purpose, flexible, impact resistant, grey, medium viscosity, multiple surface structural adhesive with an extended 90-minute working life
LOCTITE ECCOBOND 3003 LOCTITE ECCOBOND 3003 is a low modulus, high adhesion, ultra-low moisture lid attach material.
LOCTITE ECCOBOND 3005 For large packages and lead-free applications.
LOCTITE ECCOBOND 50500-1 For protection of wire-bonded ICS, consider this flowable material for fills.
LOCTITE ECCOBOND 933 Epoxy encapsulant is designed for encapsulating microelectronic chips.
LOCTITE ECCOBOND CB0260 High performance encapsulant
LOCTITE ECCOBOND CB0260-1 High performance encapsulant
LOCTITE ECCOBOND CB064 High purity, low stress, liquid, self-leveling encapsulant material.
LOCTITE ECCOBOND COB UV8801 LOCTITE ECCOBOND COB UV8801 one component epoxy encapsulant is developed to meet high temperature thermal cycling specifications.
LOCTITE ECCOBOND DP 1002UV LOCTITE ECCOBOND DP 1002UV wire and tab bond lead encapsulant.
LOCTITE ECCOBOND DP 1003UV Wire and tab bond encapsulant and gap filling adhesive.
LOCTITE ECCOBOND DP 1004 LOCTITE ECCOBOND DP 1004 is an epoxy encapsulant used on ink jet applications as a structural die attach.
LOCTITE ECCOBOND DP 1005 Jet dispensable die attach adhesive.
LOCTITE ECCOBOND DP 1012UV One component material designed for use as a wire and tab bond lead encapsulant or damming material.
LOCTITE ECCOBOND DP1000 LOCTITE ECCOBOND DP1000 wirebond encapsulant.
LOCTITE ECCOBOND DS 3318 Fast, UV curable coating and sealant.
LOCTITE ECCOBOND DS 3318LV One-component, fast cure, UV coating and sealant used in LCD module assembly.
LOCTITE ECCOBOND DS 6000 One component adhesive sealant designed for display assembly applications. It exhibits high compatibility with liquid crystal materials.
LOCTITE ECCOBOND DS 6601 Epoxy hybrid for use as the main sealant.
LOCTITE ECCOBOND DS 7301 LOCTITE ECCOBOND DS 7301 adhesive sealant is designed for display assembly applications that require protection against humidity and oxygen.
LOCTITE ECCOBOND DS 7400UV Laminating adhesive and perimeter sealant is desgined for high throughput display assembly that require protection against humidity.
LOCTITE ECCOBOND DS 8027LV Non-conductive epoxy perimeter sealant designed for display applications.
LOCTITE ECCOBOND E 1216 An innovative nonreworkable, capillary flow underfill for CSP, BGA or flip chip devices.
LOCTITE ECCOBOND E 1926 A nonreworkable, wafer-level underfill that provides excellent thermal reliability and cures relatively fast compared to standard first level underfills.
LOCTITE ECCOBOND E 3200 Flexible, low temperature, fast cure.
LOCTITE ECCOBOND E 3239 An adhesive encapsulant used in ink jet applications and other MEMS devices
LOCTITE ECCOBOND EN 3707F LOCTITE ECCOBOND EN 3707F is a no-flow encapsulant.
LOCTITE ECCOBOND EO 0206 LOCTITE ECCOBOND EO 0206 one-component epoxy is designed for use on electronic devices.
LOCTITE ECCOBOND EO 8012 Filled, flame retardant, heat activated, fast cure, 100% solids epoxy UL recognized to UL-94-V-0, 1/4" thickness testing.
LOCTITE ECCOBOND EO1016 UL94V-0 encapsulant for Smartcards and watch IC's. Nonabrasive filler allows for grinding if necessary.
LOCTITE ECCOBOND EO1060 General purpose, low glob formulation for lower CTE and lower ionic than EO1016 content for more demanding applications.
LOCTITE ECCOBOND EO1061 Medium glob formulation for lower CTE and lower ionic than EO1016 content for more demanding applications.
LOCTITE ECCOBOND EO1062 Hysol EO1062 is a general purpose, high glob version of EO1061.
LOCTITE ECCOBOND EO1072 One component, general purpose, high performance epoxy encapsulant with high Tg and low extractable ionics.
LOCTITE ECCOBOND EO1080 Low CTE version of EO1016.
LOCTITE ECCOBOND EO7039 Encapsulant is designed for attachment of integrated circuits and components to advanced flexible substrates.
LOCTITE ECCOBOND F 112 This two-part, low viscosity epoxy paste adhesive is designed for use on fiber optic assembly applications.
LOCTITE ECCOBOND F 114 BIPAX Optically clear, low viscosity, room temperature cure, epoxy adhesive.
LOCTITE ECCOBOND F 123 TRAPAX Heat cure epoxy
LOCTITE ECCOBOND F 253 BIPAX Two-part epoxy formulated to change color during the cure process to indicate the cure status.
LOCTITE ECCOBOND FF 2300 No-flow underfill for eutectic and lead-free applications.
LOCTITE ECCOBOND FP 5201 NCP for thermal compression bonding
LOCTITE ECCOBOND FP0114 Low viscosity, fast flow, epoxy based material designed for capillary underfill on flip chip applications.
LOCTITE ECCOBOND FP4323 High purity liquid epoxy encapsulant for chip on board (plastic substrate) and plastic PGA applications.
LOCTITE ECCOBOND FP4410HF Low stress fill for potting automated sensor and diodes, high Tg.
LOCTITE ECCOBOND FP4450 Industry standard fill material for fills or cavity down BGAs.
LOCTITE ECCOBOND FP4450HF High flow version of FP4450LV using synthetic filler for use in fine wire and low alpha fills applications.
LOCTITE ECCOBOND FP4450LV Low viscosity version of FP4450 (Fills) incorporating cleaner resins.
LOCTITE ECCOBOND FP4451 Industry standard damming material for BGAs.
LOCTITE ECCOBOND FP4451TD Tall dam version of FP4451 for applications requiring a taller, narrower dam. Ionically cleaner also.
LOCTITE ECCOBOND FP4460 General purpose, high purity, low stress glob top semiconductor encapsulant with improved moisture resistance and working life compared to earlier generation products.
LOCTITE ECCOBOND FP4470 High adhesion version of FP4450 for 260°C L3 JEDEC performance.
LOCTITE ECCOBOND FP4526 Epoxy underfill is designed for capillary flow on flip chip applications.
LOCTITE ECCOBOND FP4530 Snap cure flip chip underfill for FC on flex. Designed for gap size down to 25 microns.
LOCTITE ECCOBOND FP4549 Used for fine-pitch flip chip applications, fast flowing, low stress underfill.
LOCTITE ECCOBOND FP4549HT An aluminum nitride-filled version of FP4549 for high thermal applications.
LOCTITE ECCOBOND FP4651 Low viscosity version of FP4650 for a large array of packages.
LOCTITE ECCOBOND FP4654 Package level: MAP low stress encapsulant
LOCTITE ECCOBOND FP5001 One part with excellent thermal cycling resistance, laminate packages (CSP, SCSP, SIP). Compatible with both constant and pulse heat tools. Recommended for gold / gold assembly joint.
LOCTITE ECCOBOND FP5300 Excellent adhesion strength to 2- and 3-layer flex and Iaminates, as well as misc. assembly. Low temp cure ACP, RFID.
LOCTITE ECCOBOND FP6101 Reworkable underfill for improvement of mechanical reliability. Fast flow and snap cure for improved process time.
LOCTITE ECCOBOND FS 245 BIPAX Thixotropic, two-part adhesive used on staking transistors, diodes, resistors and printed circuit electronics applications.
LOCTITE ECCOBOND LA 3032-78 Encapsulant designed for high throughput assembly operations.
LOCTITE ECCOBOND LUX A4035T LOCTITE ECCOBOND LUX A4035T photocurable adhesive is formulated to enhance productivity in the assembly of optical, fiber optic, and optoelectronic devices.
LOCTITE ECCOBOND LUX A4083T LOCTITE ECCOBOND LUX A4083T photocurable adhesive is formulated to enhance productivity in the assembly of optical, fiber optic and optoelectronic devices.
LOCTITE ECCOBOND LUX OGR150THTG Photocurable adhesive for wafer level assembly glass lid attach applications.
LOCTITE ECCOBOND MC 723 Bondline control achieved with 75 micron spacers.
LOCTITE ECCOBOND NCP 5208 Non-conductive paste for thermal compression bonding in flip chip to laminate assembly.
LOCTITE ECCOBOND SB 50 Innovative high mechanical reliability and reworkable edgebond, thermal cure material designed for CSP and BGA devices.
LOCTITE ECCOBOND UF 2800A reworkable underfill Reworkable underfill. AVAILABLE FOR PURCHASE AND USE IN CHINA ONLY.
LOCTITE ECCOBOND UF 2800B reworkable underfill Reworkable underfill. ONLY AVAILABLE FOR PURCHASE AND USE IN CHINA
LOCTITE ECCOBOND UF 3037 Reworkable epoxy underfill is designed for CSP and BGA applications. It cures quickly at low temperatures to minimize stress to other components, and when cured provides excellent mechanical stress protection for solder joints.
LOCTITE ECCOBOND UF 3130 LOCTITE ECCOBOND UF 3130 is designed for use in heat sensitive optoelectronic components and other microelectronic devices.
LOCTITE ECCOBOND UF 3537 LOCTITE ECCOBOND UF 3537 is a fast cure underfill used on chip scale packaging.
LOCTITE ECCOBOND UF 3808 LOCTITE ECCOBOND UF 3808 is a capillary underfill designed to cure quickly at low temperatures to minimize stress to other components.
LOCTITE ECCOBOND UF 8806G LOCTITE ECCOBOND UF 8806G is moisture resistant. For die sizes <25mm. Ultra low alpha emissions.
LOCTITE ECCOBOND UF 8807 One component, high flow liquid underfill encapsulant with superior moisture resistance.
LOCTITE ECCOBOND UF 8826 LOCTITE ECCOBOND UF 8826 is for eutectic high lead low k applications. Medium modulus, low CTE.
LOCTITE ECCOBOND UF 8828 For eutectic, high lead or lead-free packaging. Higher modulus.
LOCTITE ECCOBOND UF 8829 For eutectic, high lead or lead-free packaging. Higher modulus.
LOCTITE ECCOBOND UF 8830 Liquid epoxy underfill for flip chip BGA.
LOCTITE ECCOBOND UF 8840 Liquid epoxy underfill encapsulant is designed for flip chip BGA applications requiring improved crack/fracture resistance and low warpage.
LOCTITE ECCOBOND UV 3000 A UV curable adhesive designed for high throughput assembly operations. This adhesive can withstand exposure to temperatures as high as 200°C.
LOCTITE ECCOBOND UV 3000LH LOCTITE ECCOBOND UV 3000LH cure adhesive is designed for high throughput assembly operations. A low halide version of UV3000. It is used in CMOS glass bonding.
LOCTITE ECCOBOND UV 9000 One component, low temperature, UV cure, thermally conductive epoxy adhesive.
LOCTITE ECCOBOND UV 9001 Dual cure sealant and adhesive used in switch leads applications used in consumer and industrial markets.
LOCTITE ECCOBOND UV 9052 A one component, dual cure (UV & moisture) general adhesive designed as a lead encapsulant.
LOCTITE ECCOBOND UV 9060 No-flow UV moisture cure encapsulant.
LOCTITE ECCOBOND UV 9060F LOCTITE ECCOBOND UV9060F no flow, UV cure encapsulant.
LOCTITE ECCOBOND UV 9061F No flow, UV/moisture cure encapsulant
LOCTITE ECCOBOND XE 1218 Reworkable, snap cure, void-free, fast flowing underfill that also provides excellent adhesion and reliability benefits.
LOCTITE ECCOBOND XUV 9085 Designed as a faster curing, high thixotropic adhesive that gives good flow control and adhesion for a thick bondline.
LOCTITE ECCOBOND XUV 9086 A one component UV cure encapsulant used in ink jet applications.
LOCTITE ECI 1001 E&C Screen printable, conductive ink is designed for use on membrane touch switch and other flex circuit applications. It offers excellent balance of flexibility, hardness and adhesion.
LOCTITE ECI 1004 E&C conductive screen printable ink LOCTITE ECI 1004 E&C conductive screen printable ink
LOCTITE ECI 4001 E&C Electrically conductive ink
LOCTITE ECI 5001 E&C Screen printable electrically conductive ink.
LOCTITE ECI 5002 E&C Electrically conductive ink
LOCTITE ECI 5003 E&C Screen printable conductive ink.
LOCTITE ECI 5004 E & C LOCTITE ECI 5004 E & C two component, electrically and thermally conductive adhesive is designed to cure at ambient temperatures.
LOCTITE ECI 7001 E&C Conductive, screen printable ink.
LOCTITE ECI 8001 E&C PTC Electrically conductive screen printable ink Electrically conductive Positive Temperature Coefficient (PTC) screen printable ink.
Loctite Econostrate Loctite Econostrate is a low cost electrically isolating phase change thermal interface material.
LOCTITE EDAG 423SS E&C Conductive screen printable ink.
LOCTITE EDAG 437 E&C Copper-based EMI shielding coating designed to provide electromagnetic compatibility (EMC) in electronic equipment housing.
LOCTITE EDAG 440 AS E&C Nickel-based EMI shielding coating designed to give electromagnetic compatibility (EMC) used for electronic equipment.
LOCTITE EDAG 452SS E&C Screen printable, UV curable dielectric ink for plastic film and paper substrates. Excellent flexibility.
LOCTITE EDAG 461SS E&C Screen printable silver ink for ITO treated plastic film.
LOCTITE EDAG 479SS E&C Screen printable silver ink for PET film.
LOCTITE EDAG 5810 E&C LOCTITE EDAG 5810 E&C two component adhesive is designed to cure at ambient temperatures.
LOCTITE EDAG 6017SS E&C Screen printable carbon ink for PET film.
LOCTITE EDAG 725A Screen printable, economical silver ink for PET film. Excellent flexibility.
LOCTITE EDAG 820B E&C Screen printable, silver filled polymer thick film ink.
LOCTITE EDAG 965SS E&C Graphite-based polymer thick film ink for use in the production of low voltage circuitry on polyester.
LOCTITE EDAG EL 411 E&C Screen printable silver ink for ITO treated plastic film. Good fine line printing capability.
LOCTITE EDAG PD 038 E&C Screen printable, UV curable dielectric ink for ITO treated PET film and copper etched circuitry.
LOCTITE EDAG PD 054 E&C LOCTITE EDAG PD 054 E&C electrically conductive silver ink is ideal for applications using solvent or heat sensitive substrates.
LOCTITE EDAG PE 007 E&C Silver/silver chloride ink for flexographic/rotogravure printing on plastic film.
LOCTITE EDAG PE 409 E&C A blend of finely divided silver and silver chloride particles in a thermoplastic resin. It is specially designed for use as an electrode material in polyester film-based medical sensing devices.
LOCTITE EDAG PF 050 E&C Screen printable silver ink for plastic film and paper substrates. Highly conductive, superior fine line printability.
LOCTITE EDAG PF 407A E&C Conductive screen printable ink.
LOCTITE EDAG PF 407C E&C Screen printable carbon ink for plastic film and paper substrates.
LOCTITE EDAG PF 410 E&C Designed for production of flexible circuitry.
LOCTITE EDAG PF 455B E&C Screen printable, UV curable dielectric ink for plastic film. Excellent humidity resistance.
LOCTITE EDAG PF 455BC E&C LOCTITE EDAG PF 455BC E&C is formulated as a crossover dielectric and is compatible with other Electrodag inks.
LOCTITE EDAG PF 465 E&C Insulating and protective ink.
LOCTITE EDAG PF-021 E&C LOCTITE EDAG PF-021 E&C is a UV curable encapsulanting photopolymer.
LOCTITE EDAG PM 404 E&C Screen printable, highly resistive ink for PET film.
LOCTITE EDAG PM 406 E&C Conductive screen printable ink that consists of very finely divided silver particles in a thermoplastic resin. It is designed to be applied by screen printing and can be applied with high coating thicknesses of 10-20 μm.
LOCTITE EDAG PM 460A E&C High speed printing fast drying silver ink. Suitable for applications using flexographic or rotogravure printing techniques.
LOCTITE EDAG PR 406 E&C Carbon polymer thick film ink
LOCTITE EDAG PR 406B E&C Screen printable, carbon ink for rigid printed circuit boards.
LOCTITE EDAG PR 800 PTB E&C Screen printable, economical carbon ink for PET film. Excellent flexibility.
LOCTITE EDAG SP 413 E&C Silver based EMI shielding coating
LOCTITE EF 557 AERO Epoxy core splice, 350°F/177°C service temperature
LOCTITE EF 562 AERO Epoxy core splice, 350°F/177°C service temperature
LOCTITE EF 562SFR AERO Epoxy core splice film, fire retardant, 350°F/177°C service temperature
LOCTITE EF 9833.1 AERO Core splice, bismaleimide, 450°F/232°C service temperature
LOCTITE EF 9890 AERO Epoxy expanding film for jet engine abradable seal
LOCTITE EF 9899 AERO Epoxy expanding syntactic film for low density applications
LOCTITE EF 9899CF AERO Epoxy expanding syntactic film for core fill and edge close out
Loctite Electrical Contact & Parts Cleaner Fast-evaporating, no CFCs or HCFCs.
Loctite EMI-strate Loctite EMI-strate has a unique combination of thermal and EMI management. Excellent choice for radiated EMI control.
LOCTITE EO7021 Encapsulant for use in smart card chip module applications.
LOCTITE EO7029 Encapsulant for smart card applications.
LOCTITE EO7038

One-component epoxy potting compound, formulated to protect sensors used in harsh environments, such as automotive applications

LOCTITE Epoxy Mixer Cups (Automotive Aftermarket Only) General purpose epoxy. Sets in 5 to 15 minutes.
Loctite Fixmaster 2000° Putty Fluid, self-leveling aluminum liquid.
Loctite Fixmaster 4 Minute Epoxy Cartridge-based, general purpose, two-part epoxy.
Loctite Fixmaster Activator For Magna-Crete and Magna-Grout
Loctite Fixmaster Anchor Bolt Grout HP High performance chemical anchor bolt grout
Loctite Fixmaster Concrete Repair Epoxy Permanent, concrete repair in a convenient stick.
Loctite Fixmaster Crack Filler Two-component, 100% solids, no solvents, crack filler.
Loctite Fixmaster Crack Filler NS

Caulking gun grade epoxy concrete crack repair.

Loctite Fixmaster Crack Filler SL Self-leveling, 100% solid, low viscosity, flexible crack filler system
Loctite Fixmaster Fast Set Grout Grout, self-leveling, non-shrinking, up to 1" deep.
Loctite Fixmaster Flex Conveyor Belt Repair Kit

For long lasting belt repairs

Loctite Fixmaster Flex Metal Primer Metal primer for use with urethane belt repair products
Loctite Fixmaster Flexible Joint Sealant Two-component, urethane based, joint sealant. 100% solids and contains no solvents.
Loctite Fixmaster High Performance Epoxy

Exceptional shock resistance and outstanding tensile strength

Loctite Fixmaster High Solids Floor Coating Primer Clear high solids, fast curing, penetrating primer
Loctite Fixmaster High Solids Novolac Epoxy Resin for self leveling epoxy topcoat.
Loctite Fixmaster Instant Belt Repair Single-component, heat-curing, temporary belt repair.
Loctite Fixmaster Magna-Grout Concrete repair and grouting system
Loctite Fixmaster Poxy Pak, Fast Cure Epoxy Fast cure epoxy, general purpose
Loctite Fixmaster Rapid Rubber Repair Urethane Premium quality, belt repair
Loctite Fixmaster Self Leveling Flooring Epoxy

Self leveling epoxy topcoat.

Loctite Fixmaster Self Leveling Flooring Epoxy, Hardener

Hardener for self leveling epoxy topcoat.

Loctite Fixmaster Self Leveling Flooring Epoxy, High Build Additive High Build Additive for self leveling epoxy topcoat.
Loctite Fixmaster Self Leveling Flooring Epoxy, Resin Resin for self leveling epoxy topcoat.
Loctite Fixmaster Super Grout Aggregate-filled, up to 18" deep, self-leveling grout
Loctite Fixmaster Superior Performance Urethane Floor Coating Urethane topcoat.
Loctite Fixmaster Superior Performance Urethane Floor Coating, Anti-Slip Additive Anti-slip additive for urethane topcoat.
Loctite Fixmaster Superior Performance Urethane Floor Coating, Line Striping Line striping for urethane topcoat.
Loctite Fixmaster Water Based Epoxy Primer/Sealer Primer for self leveling epoxy topcoat.
Loctite Fixmaster Water Based Epoxy Primer/Sealer, Hardener Primer for self leveling epoxy topcoat.
Loctite Fixmaster Water Based Epoxy Primer/Sealer, Resin Primer for self leveling epoxy topcoat.
Loctite Fixmaster Wet Surface Repair Putty Trowelable, to repair wet/underwater surfaces
Loctite Freeze & Release Freeze action penetrating oil.
LOCTITE FREKOTE 1450 Sacrificial mold release agent, water based, specifically formulated for use with resin/asbestos products
LOCTITE FREKOTE 55NC Non-CFC release agent designed for fiberglass reinforced polyester (FRP) composites. Provides multiple releases with no contaminating transfer.
LOCTITE FREKOTE 770NC Non-CFC, semi-permanent, multiple release polymer resin for fiberglass reinforced polyester (FRP) composites. Effectively releases all thermoset resins.
LOCTITE FREKOTE 800NC Non-CFC, designed to form a semi-permanent release film on mold surfaces above 150°C (300°F)
LOCTITE FREKOTE 810NC Non-CFC, semi-permanent, multiple release polymer resin designed to form a semi-permanent release interface on mold surfaces with application temperatures from room temperature to 135°C (275°F).
LOCTITE FREKOTE AC4368 Sacrificial mold release agent, all-purpose, silicone based release agent
LOCTITE FREKOTE C600 Water based emulsion originally developed for releasing large scale parts such as wind blades.
LOCTITE FREKOTE EXITT- I Sacrificial mold release agent offers superb release properties, choice of finish, and excellent part detail to meet your specific molding requirements
LOCTITE FREKOTE FMS Mold sealer for fiberglass reinforced polyester, epoxy and other composite molds
LOCTITE FREKOTE FREWAX Unique combination of wax and a semi-permanent polymer mold release agent for fiberglass reinforced polyester (FRP) composites
LOCTITE FREKOTE FRP-NC Semi-permanenant mold release agent specifically formulated for fiberglass reinforced polyester (FRP) gel coats
LOCTITE FREKOTE HMT Hot mold touch up version of Frekote® 44-NC™
LOCTITE FREKOTE LIFFT-I Sacrificial mold release agent offers a high gloss finish with excellent part detail and mold geometry retention
LOCTITE FREKOTE PMC Mold release cleaner designed to dissolve and remove wax from polyester molds without dulling the surface
Loctite Frekote PU7000 Polyurethane Release Agent
Loctite Frekote PU7001 Polyurethane Release Agent
Loctite Frekote PU7200 Polyurethane Sealer
LOCTITE FREKOTE R110 Water-based release agent designed for rubber molding.
LOCTITE FREKOTE R120 Water based semi-permanent release agent for most types of rubber-to-metal bonding applications and other types of rubber releases including medical applications.
LOCTITE FREKOTE REL-EAZE A high performance, semi-permanent mold release product developed for releasing sand cores
LOCTITE FREKOTE S50 Sacrificial mold release agent offers excellent release and slip properties and is recommended for the most demanding silicone rubber molding applications
Loctite Gasket Maker 515 - Flange Sealant (Automotive Aftermarket Only) Flexible flange sealant for use on rigid machined flanges.
Loctite Gasket Maker 518 - Flange Sealant (Automotive Aftermarket Only) Medium strength, flexible flange sealant.
Loctite Gasket Maker Stick - Flange Sealant (Automotive Aftermarket Only) Flexible, solvent-resistant seal that will not tear or decay
Loctite Gasket Sealant 1 (Automotive Aftermarket Only) Reliable, paste-like sealant, dressing, coating
Loctite Gasket Sealant 2 Extended gasket life, slow drying, flexible cure, reliable, paste-like sealant, dressing, coating - Top Pick
Loctite Gasket Sealant 2 (Automotive Aftermarket Only) Reliable, paste-like sealant, dressing, coating
LOCTITE GC 10 Room temperature stable, no-clean, halogen-free, lead-free solder paste
LOCTITE GC 3W Halogen-free, Pb-free, water washable solder paste
Loctite Gear Chain and Cable Lubricant Lubricant that protects and prolongs the life of gears, chains, wire, rope, and cable
Loctite Green Threadlocker 290 (Automotive Aftermarket Only) Medium to high-strength, wicking grade threadlocker.
Loctite H3000 Speedbonder Structural Adhesive, General Purpose General purpose, low viscosity, medium fixture time, multiple substrates, acrylic adhesive.
Loctite H3101 Speedbonder Structural Adhesive General purpose, medium viscosity, extended fixture time, multiple substrates, acrylic structural adhesive
Loctite H3300 Speedbonder Structural Adhesive General purpose, high viscosity adhesive, fast fixturing, non-sag, multiple substrates, acrylic structural adhesive
Loctite H4000 Speedbonder Structural Adhesive Plastic/composite bonder with a medium fixture time acrylic structural adhesive
Loctite H4200 Speedbonder Structural Adhesive, Toughened Plastic/composite bonder with an ultra-fast fixturing acrylic structural adhesive
Loctite H4710 Speedbonder Structural Adhesive Acrylic thixotropic, two-component, room temperature curing structural adhesive, corrosion resistant
Loctite H4720 Speedbonder Structural Adhesive Acrylic metal bonder, high viscosity, extended fixture time, with superior strength in corrosive environments
Loctite H5004 Speedbonder Structural Adhesive A low odor, low viscosity acrylic structural adhesive
Loctite H6051 Speedbonder Structural Adhesive A white UV resistant acrylic structural adhesive ideal for bonding gel-coated surfaces
Loctite H8010 Speedbonder Structural Adhesive Two-part acrylic, non-sag, two-component, room temperature curing adhesive.
Loctite H8100 Speedbonder Structural Adhesive Two-part acrylic metal bonder, low viscosity, with a fast fixture time
Loctite H8110 Speedbonder Structural Adhesive Two-part acrylic structural metal bonder especially for aluminum
Loctite H8500 Speedbonder Structural Adhesive Two-part acrylic, high toughness, steel bonder, with a medium fixture time
Loctite H8510 Speedbonder Structural Adhesive Two-part acrylic structural adhesive offers superior peel and impact strength on steel and aluminum.
Loctite H8610 Speedbonder Structural Adhesive A fast curing, two-part acrylic designed for bonding galvanized steel, galvaneal, and galvaloom.
Loctite H8700 Speedbonder Structural Adhesive A weld-through capable, toughened, two-component acrylic adhesive designed for weld / rivet reduction.
Loctite Heavy Duty Anti-Seize Excellent lubricity, metal-free
Loctite Heavy-Duty Rubberized Undercoating Rubberized undercoating seals, protects, and insulates
LOCTITE HF 108 Halogen-free, no clean, low voiding Pb-free solder paste development product. HF108 also shows excellent humidity resistance and solderability when reflowed in both air and nitrogen across a wide range of surface finishes including Immersion Ag and OSP copper.
LOCTITE HF 200 Halogen-free, no clean, low voiding Pb-free solder paste.
LOCTITE HF 212 Halogen-free solder paste.
Loctite HF6005 Halogen free structural 2-part polyurethane adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Unique blend of properties to meet aesthetic requirements for surfaces while meeting demanding performance requirements.
Loctite HF8000R Halogen free structural 2-part acrylic adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Excellent adhesion & long term durability in humid aging.
Loctite HF8075LV Halogen free structural 2-part acrylic adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Fast fixture response to elevated temperatures (>60°C).
Loctite HF8150R Halogen free structural 2-part acrylic adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Fast fixture response to elevated temperatures (60°C) and excellent long term durability to humid aging.
Loctite HF8600 Halogen free structural 2-part acrylic adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Excellent dispensibility for narrow bondlines.
Loctite HF8800 Halogen free structural 2-part acrylic adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Excellent dispensibility for narrow bondlines. Long on part open time.
Loctite Hi-Tack Gasket Sealant Liquid sealant, holds gaskets in place during assembly, prevents seizing, corrects gasket alignment, easy disassembly - Top Pick
Loctite Hi-Tack Gasket Sealant (Automotive Aftermarket Only) Liquid sealant, holds gaskets in place during assembly
Loctite Hi-Tack Stick - Gasket Dressing Wax-like stick gasket dressing has low odor and is solvent-free
Loctite Hi-Tack Stick - Gasket Dressing (Automotive Aftermarket Only) Wax-like stick gasket dressing has low odor and is solvent-free
LOCTITE High Flex Gasket Maker Flexible form-in-place, high temperature gasket maker.
Loctite HVAC Blue Pipe Joint Compound Tough, pliable, solvent based thread sealant specially formulated for heating, air conditioning, and refrigeration - Top Pick
Loctite Hydraulic Jack Oil Non-corrosive, hydraulic jack oil, improves lubrication
LOCTITE HYDX-20 LOCTITE HYDX-20 is a high activity, water wash, VOC Free, liquid flux designed for the soldering of the most difficult electronic assemblies.
LOCTITE HYSOL MG40FS-AM Epoxy molding compound delivers outstanding performance and ease of use. It is used in PDIP, SOIC and power discrete applications.
LOCTITE HYSOL CF0593 MG33F-0593 BK A green specially formulated product for use in high volume molding of tantalum capacitors.
LOCTITE HYSOL CF0671 GR2310 Gold Gold / non-halogenated molding powder, tantalum and ceramic capacitors, leaded or surface-mounted sensors.
LOCTITE HYSOL CG0645 GR735 Thermally conductive molding compound
LOCTITE HYSOL EE0182 EB0625 LOCTITE HYSOL EE0182 EB6025 is a two part, white epoxy casting system having low abrasion and rapid gel features.
LOCTITE HYSOL GR 2310 A gold, non-halogenated molding powder, for tantalum and ceramic capacitors, leaded or surface-mounted sensors.
LOCTITE HYSOL GR 2340 Specially formulated molding compound designed for use in high volume molding of tantalum capacitors.
LOCTITE HYSOL GR 360A

Epoxy molding compound

LOCTITE HYSOL GR 640HV-L1 B18 Epoxy molding compound
LOCTITE HYSOL GR 646HV-L1 LOCTITE HYSOL GR 646HV-L1 Epoxy molding compound
LOCTITE HYSOL GR 838LC

Molding compound. Surface mount/leadframes (DPAK/D2PAK).

LOCTITE HYSOL GR15F-1 A green anhydride cured molding compound that contains spherical filler and is designed for high voltage applications. This product has excellent moldability performance with high yield rates.
LOCTITE HYSOL GR15F-1P Molding compound
LOCTITE HYSOL GR15F-A Anhydride cured molding compound is formulated to contain spherical fillers.
LOCTITE HYSOL GR2320 Black/non-halogenated molding powder, tantalum and ceramic capacitors, leaded or surface-mounted sensors
LOCTITE HYSOL GR2720 A Molding compound
LOCTITE HYSOL GR2811 Epoxy molding compound delivers outstanding performance and ease of use. This material is designed to achieve JEDEC Level 1 requirements to 260°C reflow temperature. GR2811 meets UL 94 V-0 Flammability at 6.35mm thickness.
LOCTITE HYSOL GR360A(ON)-TSHT Epoxy molding compound.
LOCTITE HYSOL GR360A-FC2A Epoxy molding compound.
LOCTITE HYSOL GR640HV Low stress, green molding compound suitable for SOT packages. Provides superior moldability and reliability with lowest cost of ownership.
Loctite Hysol GR640HV-L1  Molding compound
LOCTITE HYSOL GR725LV Is a green, semiconductor grade, low stress and high adhesion molding compound for High Power Packages, Power SOIC, Power SSOP applications.
LOCTITE HYSOL GR828FC1(IMP) BULK An environmentally friendly "green" molding compound containing no bromine, antimony or phosphorus flame retardant.
LOCTITE HYSOL GR9810-1P A state-of-the-art epoxy molding compound developed to meet the stringent encapsulation requirements of package-on-package PoP, SCSP, and MMC devices.
LOCTITE HYSOL Huawei KL-1000-3A Standard molding compound suitable for ZIP, SIL and DIP packages, providing superior moldability and reliability.
LOCTITE HYSOL Huawei KL-1000-3AF A low stress molding compound suitable for GBU, KBU and TO packages, providing superior moldability and reliability.
LOCTITE HYSOL KL 1000-4T LOCTITE HYSOL KL 1000-4T provides the lowest cost of ownership with superior moldability and reliability. Extremely suitable for DIP packages.
LOCTITE HYSOL KL 4500-1 Low stress and high reliability molding compound suitable for TO, SOIC, SSOP and QFP packages, providing high purity and low uranium content. It’s low viscosity properties enables low wire sweep molding with a large operating window.
LOCTITE HYSOL KL 4500-1N Low stress and high reliability molding compound suitable for TO, SOP and SSOP packages.
LOCTITE HYSOL KL 4500-1NT A low stress and high reliability molding compound suitable for SOIC packages.
LOCTITE HYSOL KL 6500S Is a low stress molding compound suitable for SOT/SMX and SOD packages.
LOCTITE HYSOL KL 7000HA Is suitable for QFP, T/LQFP, TSOP packages. Provides ultra low stress, low moisture absorption, high purity and high reliability.
LOCTITE HYSOL KL-1000-3LX HRHJ Provides the lowest cost of ownership with superior moldability and reliability. KL1000-3LX is extremely suitable for bridge, axial and TO packages.
LOCTITE HYSOL KL-1000-3LX P Provides the lowest cost of ownership with superior moldability and reliability. Bridge Package, Axial Package and TO are typical package applications.
LOCTITE HYSOL KL-1000-4TX(NT) Epoxy molding compound delivers outstanding performance and ease of use.
LOCTITE HYSOL KL-3000-FF(H) Epoxy molding compound.
LOCTITE HYSOL KL-5000-HT Has alumina fillers and delivers a high thermal conductive solution for TO-220F/3PF's thermal requirements.
LOCTITE HYSOL KL-G 100 LOCTITE Hysol KL-G 100 is a green mold compound with 1/4" flammability rating suitable for bridge, axial and TO packages.
LOCTITE HYSOL KL-G 500HT Through hole discretes/high thermal conductivity molding compound
LOCTITE HYSOL KL-G 800H High adhesion, ultra low stress, green mold compound suitable for SOT/SMX, TSOP, D/D2PAK and L/TQFP and contains no bromine, antimony or phosphorus flame retardant.
LOCTITE HYSOL KL-G100L CQPW An environmentally friendly, "green" molding compound, containing no bromine, antimony or phosphorous flame retardant.
LOCTITE HYSOL KL-G200 Is a green mold compound with 1/4" flammability rating suitable for bridge, axial and TO packages.
LOCTITE HYSOL KL-G800H CD A green epoxy molding compound suitable for thin leaded packages. It is designed to achieve JEDEC level 2. It is used in SOT and SMX applications.
LOCTITE HYSOL MG 15F Anhydride-cured Molding Compound designed specifically for use in high voltage power applications requiring good electrical stability at high temperature.
LOCTITE HYSOL MG 15F-0140

LOCTITE Hysol MG15F-0140 is a anhydride cured molding compound designed specifically for use in high voltage power applications requiring good electrical stability at high temperature.

LOCTITE HYSOL MG 15F-35A An anhydride cured molding compound designed for use in high voltage power applications requiring good electrical stability at high temperatures.
LOCTITE HYSOL MG 35F

LOCTITE Hysol MG35F is suitable for discrete semiconductors requiring improvement in heat dissipation. Provides high productivity for power transistors.

LOCTITE HYSOL MG15F BULK A white epoxy molding compound specifically formulated for use as an overmold for opto coupler devices.
LOCTITE Hysol MG15F-0140R

LOCTITE Hysol MG15F-0140R is a anhydride cured molding compound designed specifically for use in high voltage power applications requiring good electrical stability at high temperature.

LOCTITE HYSOL MG33F-0520 A specially formulated green product desigmed for use in high volume molding of tantalum capacitors.
LOCTITE HYSOL MG40 BIM 74A BULK Epoxy molding compound for discretes and small signal and small outline transistors. It is only recommended for automatic molding operations.
LOCTITE HYSOL MG40F-4023 Conventional molding of SMD and SIP networks; gold version MG40F-0526 available
LOCTITE HYSOL MG52F-99B NXP High productivity molding compound, designed for high volume encapsulation of surface mount devices.
LOCTITE IMP 5100 4 GA Self-curing, electrical grade anaerobic sealant that cures to form a tough, flexible, thermoset plastic with excellent environmental resistance.
LOCTITE IMP 539 CAN4GALEN Self-curing anaerobic porosity sealant widely used for high volume OEM manufacturing operations such as automotive castings and powder metal parts, and fiber-reinforced composites.
LOCTITE IMP 90C Heat curing porosity sealant for small volume or intermittent users
LOCTITE IMP PMS-50E 4GA Tough and durable anaerobic sealant designed to provide superior solvent and temperature resistance in extremely demanding environments. Only product with E85 fuel approval.
LOCTITE IMP Resinol Low viscosity, anaerobic curing porosity sealant
Loctite Industrial Hand Wipes Pre-moistened, powerful citrus-scented cleaning hand wipes
Loctite Industrial Strength Paint Stripper Industrial strength paint stripper quickly strips and removes paint, eliminating sanding and scraping
Loctite Insulating & Sealing Wrap A non-sticky, self fusing, multipurpose wrap
Loctite Isostrate Loctite Isostrate 2000 is an industry standard electrically insulating phase change material.
LOCTITE ISOSTRATE 2000 LOCTITE ISOSTRATE 2000 electrically conductive isolating phase change thermal interface material.
Loctite Klean 'N Prime Anaerobic Activator (Automotive Aftermarket Only) A solvent based primer that features very long on-part life.
LOCTITE LB 771 Anti-Seize Heavy-duty, high temperature, anti-seize lubricant that resists galling and corrosion and reduces wear in heavy pressure applications.
LOCTITE LB 8007 C5-A Anti-Seize Anti-Seize provides a shield against high temperature seizing and galling
LOCTITE LB 8008 C5-A Copper Anti-Seize Lubricant (Automotive Aftermarket Only) Premium quality copper anti-seize and thread lubricant.
LOCTITE LB 8008 C5-A Copper Based Anti-Seize Lubricant Protects metal parts from rust, corrosion, galling, and seizing
LOCTITE LB 8009 Heavy Duty Anti-Seize Excellent lubricity, metal-free
LOCTITE LB 8012 Moly Paste Metal-free, very low friciton, lubricates press fits
LOCTITE LB 8013 High Purity Anti-Seize Metal free, high level of purity, excellent lubricity
LOCTITE LB 8014 Food Grade Anti-Seize Food grade, metal free, anti-seizing and galling compound
LOCTITE LB 8017 Moly Dry Film Lubricant Dry film lubricant for sliding surfaces and slow moving parts
LOCTITE LB 8023 Marine Grade Anti-Seize Marine grade anti-seize, metal-free, protects assemblies exposed to fresh and salt water
LOCTITE LB 8034 High Performance Synthetic Grease High performance synthetic grease; superior protection for equipment exposed to a wide range of conditions and operating temperatures
LOCTITE LB 8036 White Hi-Temp Anti-Seize Non-metalic, general purpose, anti-sieze lubricant
LOCTITE LB 8042 White Lithium Grease General purpose lubricating paste
LOCTITE LB 8044 Zinc Anti-Seize Zinc anti-seize, protects aluminum and ferrous surfaces
LOCTITE LB 8060 Silver Grade Anti-Seize Stick Silver grade anti-seize in a semi-solid stick
LOCTITE LB 8065 Copper Grade Anti-Seize Stick Copper based anti-seize in a semi-solid stick
LOCTITE LB 8070 Heavy Duty Anti-Seize Stick Semi-solid stick, heavy duty anti-seize
LOCTITE LB 8104 Food Grade Grease Extreme pressure, protects after flushout and steam cleaning
LOCTITE LB 8150 Silver Grade Anti-Seize Heavy duty anti-seize lubricant, temperature resistant, fortified with graphite and metallic flake
LOCTITE LB 8151 Silver Grade Anti-Seize Anti-Seize is an anti-seize spray for threaded connections exposed to high temperatures to prevent seizing and corrosion
LOCTITE LB 8211 High performance, synthetic, long-lasting
LOCTITE LB 8213 High Performance, Synthetic Anti-Corrosion Grease Excellent lubrication properties over a broad temperature range
LOCTITE LB 8219 Multi-Purpose Grease Extreme pressure, resists water washout, maintains pumpability at low temperatures
LOCTITE LB 8421 Gear, Chain & Cable Lubricant Lubricant that protects and prolongs the life of gears, chains, wire, rope, and cable
LOCTITE LB 8423 Dielectric Grease Provides moisture proof barrier with a high dielectric strength.
LOCTITE LB 8504 Anti-Seize Metal-free, electrically conductive lubricant
LOCTITE LB 8529 White Lithium Grease - Aerosol (Automotive Aftermarket Only) General purpose lubricating paste
LOCTITE LB 8632 Clear High Performance Synthetic Grease Non-flammable, synthetic grease, lasts four times longer than petroleum-based lubricants (clear)
LOCTITE LB 8700 Thread Lubricant Metal Free, general purpose thread lubricant
LOCTITE LB 8711 Penetrating Oil (Automotive Aftermarket Only) Penetrating oil, lubricates, displaces moisture
LOCTITE LB 8713 Penetrating Oil Super penetrating oil frees rusted parts and lubricates
LOCTITE LB 8801 Silicone Lubricant Multi-purpose silicone lubricant
LOCTITE LB 8801 Silicone Lubricant (Automotive Aftermarket Only) Multi-purpose silicone lubricant
LOCTITE LB N-1000 High Purity Anti-Seize Certified pure, copper-based, long-term, anti-sieze
LOCTITE LB N-5000 High Performance High Purity Anti-Seize LOCTITE LB High Performance N-5000 High Purity Anti-Seize is a specially formulated nickel-based anti-seize lubricant, produced under 100% controlled conditions for the highest purity.
LOCTITE LB N-5000 High Purity Anti-Seize Anti-seize lubricant, recommended for highly corrosive environments
LOCTITE LDAG EL-006 E&C LOCTITE LDAG EL-006 E&C is formulated to allow ease of blending.
Loctite Letter Grade A (088) Wicking Grade High Strength Threadlocker Used to lock and seal fine threaded nuts,bolts and studs in a wide variety of applications.
Loctite Letter Grade AA (089) Wicking Grade High Strength Threadlocker Used to seal porosity in welds, castings, and powdered metal parts.
Loctite Letter Grade AV (087) High Strength Threadlocker Used to lock and seal large coarse threaded nuts, bolts and studs in a wide variety of applications, high locking strength is required.
LOCTITE Letter Grade AVV High Strength Threadlocker Used to lock and seal large coarse threaded nuts, bolts and studs in a wide variety of applications, high locking strength required.
Loctite Letter Grade B (085) Medium Strength Threadlocker Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications, removable with tools.
Loctite Letter Grade C (084) Medium Strength Threadlocker Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications, removable with tools.
Loctite Letter Grade CV (083) Medium Strength Threadlocker Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications, removable with tools.
Loctite Letter Grade D (081) High Strength Threadlocker Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications requiring high strength.
LOCTITE Letter Grade E Wicking Grade Low Strength Threadlocker Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications requiring easy removal or adjustment.
LOCTITE Letter Grade EV Low Strength Threadlocker Used to lock and seal nuts, bolts, and studs in a wide variety of applications, removable with tools.
LOCTITE Letter Grade H Wicking Grade Low Strength Threadlocker Used to lock and seal fine threaded studs in a wide variety of applications where very low locking strength is required.
LOCTITE Letter Grade HV Low Strength Threadlocker Used to lock and seal nuts, bolts, and studs in a wide variety of applications, removable with tools.
LOCTITE Letter Grade HVV For the locking and sealing of metal tapered threads and fittings.
LOCTITE LF 318 96SCAGS88.5 BU LOCTITE LF 318 96SCAGS88.5 BU is a halide-free, no clean lead free, pin testable solder paste.
LOCTITE LF 318 97SCAGS88.5 BU LOCTITE LF 318 97SCAGS88.5 BU is a halide-free, no clean lead free, pin testable solder paste.
LOCTITE LF 318M Solder paste is a halide-free, no clean lead free, pin testable solder paste.
LOCTITE LF 318M LOCTITE LF 318M halide-free, no clean, low voiding Pb-free solder paste.
LOCTITE LF 700 A halide-free, no clean lead free solder paste with a broad process window for printing, reflow and humidity resistance.
LOCTITE LF 721 Halide-free, no clean, low voiding Pb free solder paste.
LOCTITE LIOFOL LA 7773-21 Laminating adhesive
Loctite LV Core Plug Sealant An anaerobic sealant specifically designed for sealing and retaining engine cup plugs.
LOCTITE M 2001RS E&C
LOCTITE M 2010RS MOD2 E&C A series of one component screen printable resistive carbon inks.
LOCTITE M 2012RS MOD2 E&C A series of one component screen printable resistive carbon inks.
LOCTITE M 2013RS MOD2 E&C One component screen printable resistive carbon inks.
LOCTITE M 2014RS MOD2 E&C One component screen printable resistive carbon ink.
LOCTITE M 2014RS MOD2 E&C One component screen printable resistive carbon ink.
LOCTITE M 2016RS E&C One component, screen printable resistive carbon ink with a resistance of >5 x 105 ohms/sq/25 μm.  It is specifically designed for printing potentiometers and resistors onto printed circuit boards.  With laser trimming a linearity of 1% can be obtained.
LOCTITE M 4100 E&C LOCTITE M 4100 E&C is a one component electroless nickel plateable, conductive polymer.
LOCTITE M 7000A BL E&C Screen printable dielectric ink
Loctite M-06FL HYSOL Urethane Adhesive LOCTITE® Hysol® Product M-06FL is a medium-viscosity, urethane adhesive.
Loctite M-11FL Hysol Medical Device Urethane Adhesive Medical device adhesive, low viscosity, flexible, 10 minute working life, ISO 10993 compliant
Loctite M-121HP Hysol Medical Device Epoxy Adhesive Medical device adhesive, high viscosity, non-sag, high impact resistance, high peel strength, extended working life, ISO 10993 compliant
Loctite M-21HP Hysol Medical Device Epoxy Adhesive Medical device adhesive, toughened, high peel resistance, high shear strength, 20 minute working life, ISO 109993 compliant
Loctite M-31CL Hysol Medical Device Adhesive Medical device adhesive, low viscosity, ultra clear with 30 minute working time, ISO10993 compliant
Loctite Maintain Lubricant Penetrant Spray-on rust preventer, unfreezes rusted parts
Loctite Maintenance Tacklebox Tacklebox designed to fit in mechanics tool chest
Loctite Manufacturing Reliability Toolbox Toolbox containing 13 Loctite brand items and used during training
LOCTITE Maximum Strength Headliner Adhesive High strength, aerosol adhesive
Loctite Maximum Strength Headliner Adhesive (Automotive Aftermarket Only) High strength, aerosol adhesive
LOCTITE MCF 800 Designed for the effective removal of all types of soldering process residues from circuit boards, screens, fixtures and equipment.
Loctite MCM-strate Loctite MCM-strate is an electrically isolating phase change thermal interface material suitable for use between a heat sink and a variety of heat dissipating components.
Loctite Metal Bonder Off-white, two-component acrylic adhesive for metal
LOCTITE MF 200 LOCTITE MF 200 is a low residue liquid flux for lead-free wave soldering.
LOCTITE MF 210 No clean, resin-free, halide-free liquid flux designed for surfaces with poor solderability.
LOCTITE MF 300 No-clean, resin-free, halide-free, water-washable liquid flux designed to reduce the incidence of mid-pad solder balling.
LOCTITE MF 388 Sustained activity in high pre-heats for dual wave and lead-free processes. High PTH fill, low residues. High reliability.
LOCTITE MF 390HR LOCTITE MF 390HR is an halogen free, no clean liquid flux. It is used in the automotive, consumer & industrial electronics and the defense & aerospace markets.
LOCTITE MFR 301 LOCTITE MFR 301 is a high activity, liquid, no clean flux for surfaces with poor solderability from the pioneers of no-clean technology.
LOCTITE MP 218 MULTICORE MP218 solder paste is a halide-free, no clean tin lead, pin testable solder paste which has excellent humidity resistance and a broad process window both for reflow and printing.
LOCTITE MR 5412 Contact Adhesive Professional contact adhesive for weatherstripping and general purpose bonding.
LOCTITE MR 5414 Black Contact Adhesive Professional, solvent-based adhesive with neoprene that blends in with black-colored fabrics, rubbers, weatherstripping, and other porous materials.
LOCTITE MR FLEX 80 POURABLE REPAIR COMPOUND Castable, two-part urethane for making molds.
LOCTITE MR Flex 80 Putty Pourable Repair Compound Trowelable, two-part, general purpose putty.
LOCTITE MR GS1 Gasket Sealant Extended gasket life, fast drying, rigid cure, solvent based - Top Pick
Loctite MS 5800 Single component polyurethane sealant that bonds, seals and waterproofs up to 180˚F.
LOCTITE MSC 01 Designed for the stencil cleaning and hand cleaning of process soldering residues. A highly effective cleaner that dries rapidly (fast evaporation).
Loctite Multi-Purpose Glass Cleaner Fast-acting, professional strength, multi-purpose, glass cleaner
LOCTITE MULTICORE HF 108RWF LOCTITE MULTICORE HF 108RWF is a halogen-free flux gel for rework processes.
LOCTITE MULTICORE HF 250DP LOCTITE MULTICORE HF 250DP is a type 5, halogen-free, lead-free, low-voiding solder paste.
LOCTITE NC-AA WICK Solder wicks
LOCTITE NC-AB WICK LOCTITE NC-AB WICK No clean desoldering wick.
LOCTITE NC-BB WICK LOCTITE NC-BB WICK No Clean desoldering wick
LOCTITE NC-OO WICK Solder wicks
LOCTITE NCI 9001 E&C Non-conductive screen printable dielectric coating. Non-conductive screen printable dielectric coating.
LOCTITE No More Leaks Plastic Pipe Thread Sealant Solvent based thread sealant seals plastic pipes and allows easy disassembly - Top Pick
Loctite Nordback 7223 Wearing Compound Cure Accelerator
Loctite Nordback 7224 Pneu-Wear Cure Accelerator
Loctite Nordbak Backing Material A 100% solids epoxy compound, Loctite® Nordbak® Backing Material is formulated for backing wear plates in cone crushers and grinding mills operating under normal conditions.
Loctite Nordbak Ceramic Tile Adhesive Wear tile adhesive, high strength
Loctite Nordbak Combo Bead Wearing Compound Abrasion resistance of both large and small beads and silicone carbide, trowelable
Loctite Nordbak High Impact Backing Material A 100% solids epoxy system with elastomers for backing wear material in crushers and grinding mills.
Loctite Nordbak High Temperature Pneu-Wear Protects against fine particle abrasion and temperatures to 450°F
Loctite Nordbak Low Odor Wearing Compound Large ceramic beads, fine silicone carbide, high performance, low odor
Loctite Nordbak Thin Mil Brushable Ceramic - Black Corrosion-resistant, protects against turbulance, abrasion, and cavitation
Loctite Nordbak Thin Mil Brushable Ceramic - Blue Corrosion-resistant, protects against turbulance, abrasion, and cavitation
Loctite Nordbak Ultra High Temperature Pneu-Wear Protects against fine particle abrasion and temperatures to 550°F
LOCTITE NS 5025A PA Non-silicone potting material
LOCTITE NS 5109 High Temperature Gasket Sealant Slow-setting, non-hardening, high-temperature sealant - Top Pick
LOCTITE NSWC100

LOCTITE NSWC100 is a non-silicone, water cleanable thermal compound.

Loctite O-Ring Kit (Autmotive Aftermarket Only) Kit makes custom fractional o-rings on the spot
LOCTITE O-Ring Making Kit Kit makes custom o-rings on the spot
LOCTITE ODC-Free Cleaner & Degreaser Non-aqueous, for cleaning surfaces to be bonded with adhesives
Loctite OM4101 Medium viscosity and water based halogen free primer designed to improve adhesion in plastic overmolding processes used in hand held devices like mobile phones, tablets, & laptops.
Loctite OM4501 Low viscosity and solvent based halogen free primer designed to improve adhesion in plastic overmolding processes used in hand held devices like mobile phones, tablets, & laptops.
Loctite OM8200 Low viscosity and water based halogen free primer designed to improve adhesion in plastic overmolding processes used in hand held devices like mobile phones, tablets, & laptops.
LOCTITE PC 3466 Aluminum Liquid Aluminum liquid which sets in 20 minutes.
LOCTITE PC 3965 Fast Set Steel Epoxy Fast set, cartridge-based, steel-filled, fast, cost effective epoxy.
LOCTITE PC 3967 Stripped Thread Repair Kit Reliable repairs without drills, taps, tools, or inserts
LOCTITE PC 3967 Stripped Thread Repair Kit (Automotive Aftermarket Only) Reliable repairs without drills, taps, tools, or inserts
LOCTITE PC 7202 Marine Chocking Self-leveling, fast curing, non-shrinking grout
LOCTITE PC 7204 High Performance Quartz

Recommended for restoring and protecting old concrete

LOCTITE PC 7218 Wearing Compound Large ceramic beads, fine silicone carbide, high performance
LOCTITE PC 7222 Wear Resistant Putty Ceramic fibers, trowelable, excellent wear and abrasion resistant
LOCTITE PC 7226 Pneu Wear Small ceramic beads and silicone carbide, trowelable
LOCTITE PC 7227 Brushable Ceramic - Grey Corrosion-resistant, protects against turbulance, abrasion, and cavitation
LOCTITE PC 7228 Brushable Ceramic - White Corrosion-resistant, protects against turbulance, abrasion, and cavitation
LOCTITE PC 7230 High Temperature Wearing Compound Resists sliding abrasion and temperatures to 450°F, trowelable
LOCTITE PC 7234 High Temperature Brushable Ceramic Protects against turbulance, abrasion, and cavitation
LOCTITE PC 7254 Aluminum Putty Aluminum filled putty.
LOCTITE PC 7255 Sprayable Ceramic LOCTITE® PC 7255™ Sprayable Ceramic is a solvent-free ceramic filled two part epoxy coating.
LOCTITE PC 7303 Ultra High Temperature Wearing Compound Resists sliding abrasion and temperatures to 550°F, trowelable
LOCTITE PC 7317

Filled with small ceramic beads and silicon carbide for maximum protection against fine particle abrasion to 250°F. Trowelable.

LOCTITE PC 7319 Chemical Resistant Coating Chemical resistant coating, smooth, glossy, low friction finish, highly chemical resistant
LOCTITE PC 7333GY BRUSHABLE CERAMIC CINZA Corrosion-resistant, protects against turbulance, abrasion, and cavitation
LOCTITE PC 7455 Fast Cure Pneu Wear Fast cure, trowelable wearing compound
LOCTITE PC 9020 Nordbak Backing Compound Epoxy system for backing wear metal in gyratory and cone crushers under typical dry service temperatures of -28°C to 104°C (-20°F to 220°F).
LOCTITE PC 9313 High Impact Wearing Compound Rubber-modified, trowelable wearing compound
LOCTITE PC 9340 High Temperature Chemical Resistant Coating
LOCTITE PC 9410 Magna-Crete Two-component, rapid setting concrete repair and grouting system.
LOCTITE PC 9416 Floor Fill Trowelable, for repairing and resurfacing cracks in concrete floors.
LOCTITE PC 9599 Fast Cure Wearing Compound Fast cure, trowelable wearing compound
LOCTITE PC 9626 Deep Pour Grout Grout, aggregate-filled, up to 6" deep.
LOCTITE PC 9628 WEARING COMPOUND For casting wear-resistant parts, pourable
LOCTITE PC 9660 Maxi-Coat Rust Inhibitor Heavy-duty, long-term protection coating
Loctite Penetrating Oil Penetrating oil, lubricates, displaces moisture
Loctite Pipe Joint Compound High temperature, universal pipe and joint compound - Top Pick
Loctite Pipe Joint Compound (Automotive Aftermarket Only) Universal pipe and joint compound, seals threaded joints on water, oil, and fuel lines
LOCTITE Pipe Repair Kit Temporary emergency pipe repair kit
Loctite Plastic Bonder Off-white, two-component acrylic for plastic
Loctite Plastix Advanced Plastic Bonder (Automotive Aftermarket Only) Advanced automotive aftermarket plastic repair
Loctite Power Grab Industrial Construction Adhesive Heavy duty, high strength, construction grade adhesive
Loctite Powerstrate 51 Loctite Powerstrate 51 is a low thermal impedance suitable for a wide range of applications on bare die processors and other electronic devices.
LOCTITE Powerstrate Xtreme

LOCTITE Powerstrate Xtreme (PSX) is a reworkable unsupported film with superior thermal performance even at low pressure.Also available in other versions (PSX-D-LV, PSX-D, PSX-Pm, PSX-PE)

LOCTITE Pre-Applied Anti-Seize Preapplied, "dry" anti-seize lubricant
LOCTITE PSX-D

LOCTITE PSX-D (Powerstrate Xtreme) is a repeatable phase change thermal interface material. Also available in other versions (PSX-D-LV, PSX-Pm, PSX-PE)

LOCTITE PSX-D-LV

LOCTITE PSX-D-LV (Powerstrate Xtreme) is a reworkable and repeatable phase change thermal interface material. (It is also available in other versions (PSX-D, PSX-Pm, PSX-PE)

LOCTITE PSX-PE

LOCTITE PSX-PE (Powerstrate Xtreme) is a phase change thermal interface material.

LOCTITE PSX-Pm

Reworkable and repeatable phase change material. Also available other versions (PSX-D-LV, PSX-D, PSX-PE)

Loctite PTFE Thread Sealing Tape Non-curing thread sealing tape replaces conventional pipe joint compound and hardening sealants and can be used on all pipe materials.
Loctite Quick Gel (Automotive Aftermarket Only) Multi-purpose, high viscosity instant adhesive for automotive aftermaket repairs
Loctite Quick Metal 660 Retaining Compound, Press Fit Repair (Automotive Aftermarket Only) A creamy, non-running adhesive/sealant
Loctite Quick Service Tool Kit Tool kit that contains eight of the most common brand products
Loctite Quick Set Epoxy Pak (Automotive Aftermarket Only) Fast curing, non-shrinking, colorless, epoxy in a 2-part dispensing syringe
Loctite QuickStix 5671 PST Thread Sealant Stainless steel and other metals thread sealant - Top Pick
Loctite QuickTite Gel - Instant Adhesive (Automotive Aftermarket Only) Multi-purpose, high viscosity instant adhesive for automotive aftermaket repairs
Loctite QuickTite Instant Adhesive Gel High viscosity instant adhesive, one part, surface insensitive, room temperature cure.
Loctite QuickTite Liquid - Instant Adhesive (Automotive Aftermarket Only) Multi-purpose liquid instant adhesive for automotive aftermaket repairs
Loctite Ready Gasket - Gasket Maker (Automotive Aftermarket Only) One part RTV cure silicone is formulated for high performance, leakproof gaskets in one minute, blowout resistant, sensor-safe
Loctite Rear Window Defogger (Automotive Aftermarket Only) Rear window defogger repair kit
Loctite Rearview Mirror Adhesive (Automotive Aftermarket Only) Adhesive permanently remounts mirrors to windshields
Loctite Red Threadlocker 262 (Automotive Aftermarket Only) Medium to high strength red threadlocker for large bolts & studs.
LOCTITE Red Threadlocker 271 (Automotive Aftermarket Only) High strength red threadlocker for large bolts and studs.
Loctite Red Threadlocker 272 (Automotive Aftermarket Only) High strength, fast curing, high temperature red threadlocker for large bolts & studs.
Loctite Red Threadlocker 277 (Automotive Aftermarket Only) High strength red threadlocker for large bolts and studs.
Loctite Red Threadlocker Stick, High Strength (Automotive Aftermarket Only) High strength, resistance to heavy shock, vibration, and stress levels.
Loctite Reliability Tacklebox Tacklebox containing 14 Loctite brand products
Loctite Resinol 90R Porosity Sealant - 2 Component Low viscosity heat cure sealant that is formulated with a chemistry that allows the material to be washed from the surface of the casting and later separated and reused in the process tank.
Loctite Resinol AT Porosity Sealant High temperature and chemical resistant anaerobically curing porosity sealant
Loctite Retaining Compound 620 (Automotive Aftermarket Only) High temperature (450°F/232°C), high viscosity liquid retaining compound
Loctite Retaining Compound 680 (Automotive Aftermarket Only) High strength, low viscosity retaining compound.
Loctite RTV Silicone 5920 - High Performance Copper (Automotive Aftermarket Only) One part RTV cure silicone for 4-cylinder, turbo-charged or high-performance engines.
Loctite RTV Silicone Black - Adhesive/Sealant (Automotive Aftermarket Only) One part RTV cure silicone is for general-purpose, RTV indoor/outdoor sealant, seals, bonds, repairs, mends.
Loctite RTV Silicone Blue - Gasket Maker (Automotive Aftermarket Only) One part RTV cure silicone replaces any cut gasket.
Loctite Rubberized Undercoating (Automotive Aftermarket Only) Rubberized undercoating seals, protects, and insulates
Loctite Rust Dissolver (Automotive Aftermarket Only) Rust dissolver, chemically dissolves rust from all iron and steel surfaces
LOCTITE SF 137DA Pro Strength Varnish Remover Super jet spray, quick acting varnish remover
LOCTITE SF 5408 Belt Dressing & Conditioner Recommended to prevent slipping and increase friction for all types of belts
LOCTITE SF 7088 Primer

Anaerobic primer for LOCTITE threadlockers in semi-solid stick form. On part life 30 days.

LOCTITE SF 7109 ACTIVATOR Increases cure speed of Loctite® instant adhesives when your application requires a fast curing cyanoacrylate.
LOCTITE SF 7113 ACTIVATOR Increases cure speed of instant adhesives when your application requires a fast curing cyanoacrylate.
LOCTITE SF 712 Accelerator Increases cure speed of instant adhesives when your application requires a fast curing cyanoacrylate.
LOCTITE SF 7360

Surface Mount Adhesive Cleaner is a nozzle and dispense machine component cleaner. Excellent for removal of uncured adhesive from the board without causing the adhesive to gel.

LOCTITE SF 7419 PRIMER Halogen-free, non-CFC solvent based surface activator
LOCTITE SF 7452 ACCELERATOR Increases cure speed of instant adhesives when your application requires a fast curing cyanoacrylate and has aggressive cleaning properties.
LOCTITE SF 7471 MIL-SPEC Primer Acetone/isopropanol base primer available in liquid or aerosol formulas. On part life 7 days. Dry time 30-70 seconds.
Loctite SF 754 Rust Treatment (Automotive Aftermarket Only) One-step rust treatment. Destroys old rust and prevents new rust.
LOCTITE SF 7611 Pro Strength Parts Cleaner Parts cleaner aggresively penetrates, dissolves, removes oil and grease
LOCTITE SF 7625 RUST TREATMENT One-step rust treatment. Destroys old rust and prevents new rust.
LOCTITE SF 7629 Nonflammable Electrical Contact Cleaner Dries residue-free in seconds
LOCTITE SF 7631 MC-Free Paint Stripper Paint Stripper/Gasket Remover
LOCTITE SF 7633 Non-Chlorinated Parts Cleaner Non-chlorinated parts cleaner, penetrates, dissolves, removes dirt and oil
LOCTITE SF 7635 Pro Strength Degreaser Degreaser quickly dissolves and removes, rinses off with water
LOCTITE SF 7649 MIL-SPEC Primer Acetone base primer available in liquid and aerosol formulas. On part life 30 days. Dry time 30-70 seconds.
LOCTITE SF 768 Clean Up Solvent for Instant Adhesives (Nitromethane) Dissolves cured cyanoacrylate based adhesives
LOCTITE SF 7693 Cold Galvanizing Compound Highly resistant to salt corrosion and water, not resistant to acid or alkaline solutions.
LOCTITE SF 770 Primer Adhesion Promoter Adhesion promoter for instant adhesives on hard-to-bond plastics and elastomers
LOCTITE SF 7701 Medical Device Adhesive Primer Adhesion promoter for instant adhesives on hard-to-bond plastics and elastomers
LOCTITE SF 7840 Cleaner & Degreaser All purpose, industrial strength, concentrated, biodegradable cleaner
LOCTITE SF 790 Paint Stripper Removes gaskets from any type of assembly in 10 to 15 minutes
LOCTITE SF 7900 Ceramic Shield for Welding A ceramic dry film protective coating for MIG/MAG welding processes. Protects contact tips and welding nozzles by preventing adhesion of welding spatter.
LOCTITE SF 7909 Anti-Weld Spatter Protects welded parts from spatter, easy to clean, less grinding - post assembly, rinses clean with water, saves time and money.
LOCTITE SF 8220 Flex Cleaner Single component putty.
LOCTITE SF F720 Tough Rubber Coating Solvent based, durable, flexible, rubber-like protective coating.
LOCTITE SF FM Etch Agent Activator Etching agent for conveyor belt repair
LOCTITE SF7190

Cleaner for optical bonding adhesive

LOCTITE SF7191

Cleaner for optical bonding adhesives

LOCTITE SI 5033 One part, UV or visible light and moisture curing, high speed silicone
LOCTITE SI 5050 UV light curing, non-corrosive silicone adhesive / sealant.
LOCTITE SI 5055 Self-leveling, flowable silicone adhesive sealant
LOCTITE SI 5600 Silicone Adhesive / Sealant Two part, fast cure silicone system with 5-minute fixture time
LOCTITE SI 5607 Silicone Adhesive / Sealant Two-part, 50-minute fixture, oil resistant silicone adhesive sealant
LOCTITE SI 5640 Fast cure 2K self leveling silicone potting adhesive.
LOCTITE SI 5699 Grey High Performance RTV Silicone Gasket Maker One part RTV silicone, remains flexible, withstands vibration. Ideal for use on flexible flanges, machined or cast surfaces, metal or plastic.
LOCTITE SI 587 Blue High Performance RTV Silicone Gasket Maker One part RTV silicone, forms tough, flexible gaskets directly on flange, recommended for sealing all types of flanges - Top Pick
LOCTITE SI 587 RTV Silicone - High Performance Blue (Automotive Aftermarket Only) One part RTV cure silicone designed to be sensor-safe, low odor, non-corrosive.
LOCTITE SI 5900 Heavy Body RTV Silicone Flange Sealant - Non-Aerosol One part RTV silicone, superior flexibility and adhesion, instant seal, excellent fluid resistance, non-corrosive
LOCTITE SI 5900 Instant Gasket - Aerosol One part RTV cure silicone is formulated for high performance, leakproof, and fast gasketing, non-corrosive - Top Pick
LOCTITE SI 5904 RTV silicone provides the performance of 5900™ while offering more robust resistance to other fluids including water/glycol.
LOCTITE SI 5905 RTV Black Silicone Flange Sealant One part RTV silicone, superior flexibility and adhesion, fast depth of cure, black
LOCTITE SI 5910 RTV Silicone Flange Sealant One part RTV silicone, superior flexibility and adhesion, excellent fluid resistance
LOCTITE SI 5920 Copper High Temp RTV Silicone Gasket Maker One part RTV silicone, superior flexibility and adhesion, excellent high temperature resistance
LOCTITE SI 593 Black RTV Silicone Adhesive Sealant One part RTV silicone, general purpose, one-part, cures at room temperature.
LOCTITE SI 594 White RTV Silicone Adhesive Sealant One part RTV silicone, general purpose, one-part, cures at room temperature.
LOCTITE SI 5945 FLANGE SEALANT Flange sealant provides superior flexibility and adhesion. Provides an instant seal with extended open time for processing flexibility. Excellent fluid resistance. Non-corrosive. Low odor. Low volatility.
LOCTITE SI 595 Clear RTV Silicone Adhesive Sealant One part RTV silicone, general purpose, one-part, cures at room temperature.
LOCTITE SI 595 RTV SILICONE SEALANT CLEAR One part RTV cure silicone is for general-purpose, RTV indoor/outdoor sealant, seals, bonds, repairs, mends.
LOCTITE SI 596 Red High Temp RTV Silicone Adhesive Sealant One part RTV silicone, resists aging, weather, thermal cycling.
LOCTITE SI 596 RTV SILICONE VERMELHO One part RTV cure silicone is formulated for high temperature resistance and is for oxygen sensor equipped engines
LOCTITE SI 5970 High modulus, non-oxime, RTV silicone, form-in-place flange sealant
LOCTITE SI 598 Black High Performance RTV Silicone Gasket Maker One part RTV cure silicone for dealership warranty requirements, ensures extended drivetrain warranty compliance.
LOCTITE SI 7657 FLANGE SEALANT Fast drying, metallic copper sealant.
LOCTITE SI RTV BLUE Gasket maker replaces any cut gasket
Loctite Silstrate Loctite Silstrate is a comfortable silicone rubber pad offering high dielectric strength and excellent cut-through resistance.
Loctite Silver Grade Anti-Seize Lubricant (Automotive Aftermarket Only) Heavy duty anti-seize lubricant, temperature resistant, fortified with graphite and metallic flake
Loctite Silver Grade Anti-Seize Stick (Automotive Aftermarket Only) Heavy duty anti-seize lubricant, temperature resistant, fortified with graphite and metallic flake
LOCTITE Silverstrate

LOCTITE Silverstrate has excellent thermal performance, particularly at higher pressures. Typically used on RF devices and SCR's where electrical conductivity is required (silver-filled).

Loctite Sleeve Retainer 640 (Automotive Aftermarket Only) High strength, high temperature retaining compound.
Loctite Solventless Anaerobic Activator Solvent-free activator for anaerobics.
LOCTITE SpeedSeal RTV Silicone Adhesive Sealant Creates a tough, watertight, mildew resistant seal quickly
Loctite Stick Assortment Pack (Automotive Aftermarket Only) Thread treatment stick assortment pack
LOCTITE STYCAST 1090 BK LOCTITE STYCAST 1090 BK is a room temperature cure epoxy designed for encapsulation and potting of electronic assemblies that require lower weight such as aerospace applications.
LOCTITE STYCAST 1090SI A room temperature cure lightweight syntactic encapsulant that is recommended for applications where high compressive stress is applied to encapsulated circuitry - as in deep ocean work..
LOCTITE STYCAST 2017M4 PTA Epoxy heat cure encapsulant developed for lamp type, blue LED.
LOCTITE STYCAST 2651-40 A filled, general purpose, dielectric grade epoxy encapsulant. It is a lower viscosity version of STYCAST 2651. It has excellent adhesion to a wide variety of substrates and excellent electrical properties. It can be cured with CATALYST 11, CATALYST 9 and CATALYST 23 LV.
LOCTITE STYCAST 2651J Two component, low viscosity, general purpose epoxy encapsulant.
LOCTITE STYCAST 2651MM Designed as a general purpose encapsulant which requires low viscosity and low abrasion. It is especially useful for machine dispensing and for parts that require post molding machining.
LOCTITE STYCAST 276 Epoxy is formulated not to sag or run during cure when applied on loose fitting parts set on vertical or overhead surfaces.
LOCTITE STYCAST 2762 Two component epoxy encapsulant designed for electronic components exposed to harsh environments.
LOCTITE STYCAST 2850 MT Recommended for encapsulation of components that require heat dissipation and thermal shock properties.
LOCTITE STYCAST 2850FT For high thermal conductivity and low outgassing, consider this encapsulant.
LOCTITE STYCAST 2850KT LOCTITE STYCAST 2850KT is a thermally conductive, electrically insulatiive epoxy encapsulant designed for heat sink replacement in non-integrated electrical components and assemblies. it is also recommended for use in high voltage applications where surface arcing or tracking is a concern.
LOCTITE STYCAST 3050 LOCTITE STYCAST 3050 is designed for potting and encapsulation applications.
LOCTITE STYCAST 5952 RD PTA A filled, thermally conductive silicone encapsulant.
LOCTITE STYCAST A 316-48 One component, heat resistant, fast heat cure, epoxy paste adhesive
LOCTITE STYCAST AC 0305 Universal extrudable heat seal coating.
LOCTITE STYCAST E 1470 B-stageable, fast cure and dispensible.
LOCTITE STYCAST E 2534 FR Heat cure epoxy potting compound that complies with recent demands on environmentally friendly products and does not contain brominated flame retardants.
LOCTITE STYCAST EE 1068 Two component, room temperature cure, encapsulants potting epoxy.
LOCTITE STYCAST EO 10587 LOCTITE STYCAST EO 10587 is a single component epoxy system that cures at 125°C and provides excellent environmental and thermal protection to encapsulated parts.
LOCTITE STYCAST EO 8007 LOCTITE STYCAST EO 8007 is a unique 100% reactive, 100% solids epoxy insulating resin.
LOCTITE STYCAST ES 0614 PTA Undiluted epoxy, low viscosity casting system that exhibits exceptional resistance to impact and thermal shock.
LOCTITE STYCAST ES 1002 DQ Black, low cost, flexible, room temperature cure, lightweight syntactic encapsulant capable of UL94V-0, non-abrasive filled, long pot life.
LOCTITE STYCAST ES 1004 DQ LOCTITE STYCAST ES 1004 DQ is capable of UL94V-0, stable to 155°C.
LOCTITE STYCAST ES 1902 DQ LOCTITE STYCAST ES 1902 DQ is a clear, room temperature cure, transparent, very fast UV gel, excellent dimensional stability and low viscosity; easy to handle.
LOCTITE STYCAST ES 4322FC epoxy encapsulant LOCTITE STYCAST ES 4322FC liquid epoxy encapsulant
LOCTITE STYCAST HD 3561 Epoxy system is designed for use as a sealant or for potting electronic devices.
LOCTITE STYCAST NX17 A two-component, heat cure, epoxy encapsulant with good adhesion to PPA.
LOCTITE STYCAST NX76 One-component epoxy encapsulant designed for SMD LED. Low CTE and good light dispersion by adding a small amount of filler.
LOCTITE STYCAST PC 12-007M PTA LOCTITE STYCAST PC 12-007M PTA is a 100% solids, general purpose, epoxy printed circuit coating developed to meet military requirements.
LOCTITE STYCAST PC 18M LOCTITE STYCAST PC 18M is a flexible solvent-based, one-component urethane coating.
LOCTITE STYCAST PC 20M LOCTITE STYCAST PC 20M is a stable, clear material suitable for continuous operation up to 110°C.
LOCTITE STYCAST PC 28-STD LOCTITE STYCAST PC 28-STD is a convenient aerosol packaging, oxygen-cure, urethane, printed circuit board coating system.
LOCTITE STYCAST PC 29M PTB LOCTITE STYCAST PC 29M PTB is a thin-film, urethane printed circuit board coating with good toughness and high flexibility. Note: Not sold in Europe.
LOCTITE STYCAST PC 355-1 Lead-free, transparent, one-component protective urethane varnish system that is dry to the touch in under 30 minutes.
LOCTITE STYCAST PC 355-1FL Flexible thermoplastic varnish formulated to protect and insulate printed wiring boards both on the component and the soldered side.
LOCTITE STYCAST PC 40-UM LOCTITE STYCAST PC 40-UM is a solvent-free, low-viscosity, rapid gel, UV-moisture cure one component acrylate-based conformal coating.
LOCTITE STYCAST PC 54 LOCTITE STYCAST PC 54 is a rapid drying, one-component for acrylic non-atomized spray coating applications. Provides excellent vibration resistance and toughness. Can be removed for repair.
LOCTITE STYCAST SC 3613 Heat curable, optically clear, high purity, silicone, one-component coating to be applied by brush, dip or flow coating.
LOCTITE STYCAST SC 8001 LOCTITE STYCAST SC 8001 B-Stageable, Electrically Insulating Epoxy Adhesive
LOCTITE STYCAST U 2535 PTB Flexible polyurethane encapsulant.

LOCTITE STYCAST U 7510-1 One component polyurethane
LOCTITE STYCAST US 0154 Encapsulant potting urethane.
LOCTITE STYCAST US 1151 LOCTITE STYCAST US 1151 is a low viscosity, reenterable potting and encapsulation compound. It has excellent low temperature properties. Introduction of this material on a bed of 8-12 mesh sand increases thermal conductivity while decreasing shrinkage and cost. LOCTITE STYCAST US 1151 can be used to encapsulate electronics for various applications including under-the-hood automotive and marine. The low glass transition temperature means that sensitive compounds are not damaged during low temperature excursions.
LOCTITE STYCAST US 1152 LOCTITE STYCAST US 1152 is an unfilled, low viscosity, flexible, soft, ambient and/or oven curable urethane encapsulant.
LOCTITE STYCAST US 1750 LOCTITE STYCAST US 1750 elastomeric polyurethane, is a waterwhite, clear, medical grade, fast gel potting material. It is ideal for blood heat exchanger, dialyzer and oxygenerator units.
LOCTITE STYCAST US 2050 LOCTITE STYCAST US 2050 is a quick set, optically clear polyurethane compound that exhibits excellent ultraviolet resistance.
LOCTITE STYCAST US 2350 LOCTITE STYCAST US 2350 is a flexible, flame retardant, mineral filled, polyurethane compound.
LOCTITE STYCAST US 2651 LOCTITE STYCAST US 2651 is an unfilled, low viscosity, re-enterable potting and encapsulation compound.
LOCTITE STYCAST US 5529 LOCTITE STYCAST US 5529 is a flexible, flame retardant, mineral filled polyurethane compound.
LOCTITE STYCAST US 5533 PTB LOCTITE STYCAST US 5533 PTB flexible, flame retardant potting compound.
LOCTITE STYCAST US 5538 LOCTITE STYCAST US 5538 is a flexible, unfilled, potting compound. This system provides low viscosity for good flow and good adhesion to many substrates.
LOCTITE STYCAST UV 7993 One component urethane acrylate
Loctite Summer Additive For Magna-Crete and Magna-Grout
Loctite Super Glue (Automotive Aftermarket Only) Multi-purpose liquid instant adhesive for automotive aftermaket repairs
Loctite Superflex Clear Non-Corrosive RTV Silicone Adhesive Sealant One part RTV silicone neutral curing, non-corrosive.
Loctite Superflex Construction Yellow RTV Silicone Adhesive / Sealant Construction Yellow RTV Silicone Adhesive / Sealant
Loctite Superflex Equipment Green RTV Silicone Adhesive Sealant Equipment Green RTV Silicone Adhesive Sealant
Loctite Superflex High Temp RTV Silicone Adhesive Sealant, Red (Automotive Aftermarket Only) One part RTV silicone, resists aging, weather, thermal cycling.
Loctite Superflex RTV Silicone Adhesive Sealant, Black (Automotive Aftermarket Only) One part RTV cure silicone general-purpose, indoor/outdoor sealant, seals, bonds, repairs, mends.
Loctite Superflex RTV Silicone Adhesive Sealant, Blue (Automotive Aftermarket Only) One part RTV silicone forms a tough, flexible rubber, reliable "formed-in-place."
Loctite Superflex RTV Silicone Adhesive Sealant, Clear (Automotive Aftermarket Only) One part RTV silicone forms a tough, flexible rubber, reliable "formed-in-place."
LOCTITE TAF 8800 Thermal Absorbing Film LOCTITE TAF 8800 is a heat absorbing material designed to reduce the skin temperature of mobile electronic devices.
LOCTITE TC 4 Thermally conductive, high temperature silicone thermal grease.
LOCTITE TC 8M Thermally conductive, high temperature silicone thermal grease.
LOCTITE TCF 1000 AL Phase change thermal interface material suitable for use between a heat sink and a variety of heat dissipating components.
LOCTITE TCP 8010 Thermal grease
LOCTITE TFN 700B Newtonian tacky flux designed for PoP applications.
LOCTITE TG100 Ultra high performance thermal grease
Loctite Thread Sealant 545 (Automotive Aftermarket Only) High lubricating threadlocker for high pressure fluid power systems.
Loctite Thread Sealant for Oxygen Compatible Systems A white paste for sealing threads in systems carrying oxygen - Top Pick
Loctite Thread Sealant Stick (Automotive Aftermarket Only) Single component, semi-solid pipe sealant compound
Loctite Thread Treatment Sticks Counter Display (Automotive Aftermarket Only) Thread treatment sticks counter display
Loctite Tight Multipurpose Anaerobic Gel Threadlocker / Thread Sealant Medium strength, general purpose gel adhesive.
LOCTITE Tile Bond Red, High Temp RTV Silicone Adhesive Sealant High temperature RTV silicone adhesive sealant
Loctite Toolbox Toolbox containing fifteen of the latest and best technological pieces
LOCTITE TSP 400 SIL PAD
LOCTITE TTC-LF 32 LOCTITE TTC-LF 32 is a handy, non-abrasive, solder iron tip tinner. Easily wets hot solder irons leaving a brightly tinned tip.
Loctite Tune-Up Kit (Automotive Aftermarket Only) Easy-to-use, two-part tune-up kit
Loctite U-09FL Hysol Urethane Structural Adhesive, Highly Flexible High performance, highly flexible, plastic bonder, high peel strength
Loctite U-09LV Hysol Urethane Structural Adhesive, Low Viscosity Low viscosity, plastic and multiple surface bonder, high peel strength
LOCTITE UK 1340 B30 A high viscosity, 2K structural adhesive for composite plastics bonding in wind blades.
LOCTITE UK 1351 Low Viscosity, structural polyurethane resin for hand lay-up.
Loctite UK 1366 B10 Two-component epoxy-polyamide primer for increased adhesion to metal.
Loctite UK 1405 Fast-curing, abrasion resistant putty for optimal production speed and durability with gap fill capabilities of up to 10mm.
Loctite UK 8370 B10 Low viscosity, structural polyurethane resin for hand lay-up.
LOCTITE UK U-05FL Urethane Structural Adhesive Fast setting, highly flexible, metal bonder, high strength
Loctite Under Pressure Pipe Repair Kit Emergency pipe repair kit, repairs while pipes are under pressure, no tools or specially trained personnel
LOCTITE UR 7001 Urethane Sealant - Grey Urethane sealant; single component, gun-grade, bonds, seals, waterproofs (black)
LOCTITE UR 8345

Single component, solvent free, moisture curable, liquid polyurethane adhesive. It cures with water to form a tough, strong, and thermoset polymer.

LOCTITE UR 8345RD LOCTITE UR 8345RD Red colored, high strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed.
LOCTITE UR S110 High strength, thermoset liquid -slowest cure
LOCTITE UR S111 High strength, thermoset liquid -slow cure
LOCTITE UV8000 Photonics material UV cure
LOCTITE UV8800M UV cure encapsulant for smart card and other COB applications.
Loctite ViperLube High Performance Synthetic Grease (Automotive Aftermarket Only) High performance synthetic grease; superior protection for equipment exposed to a wide range of conditions and operating temperatures
Loctite ViperLube High Performance Synthetic Lubricant Gear Oil - 90W Loctite ViperLube High Performance Synthetic Lubricant Gear Oil - 90W extends equipment life and reduces oil changes and energy costs. Recommended for use on gear sets, bearings, circulating oil systems, chains and worn gear units.
Loctite ViperLube High Performance Synthetic Lubricant ISO-46 15 WT
Loctite ViperLube High Performance Synthetic Lubricant ISO-460 140 WT
Loctite ViperLube High Performance Synthetic Lubricant ISO-68 20 WT
Loctite Water Pump & Thermostat Housing RTV Silicone (Automotive Aftermarket Only) One part RTV silicone, non-corrosive, sensor-safe RTV silicone, formulated specifically for water pumps and thermostat housings.
LOCTITE Windshield Repair (Automotive Aftermarket Only) One-component, windshield repair for use by car owner; requires no mixing or heat.
Loctite Winter Additive For Magna-Crete and Magna-Grout
LOCTITE WS 200 LOCTITE WS 200 is a high performance, water-washable solder paste. Residues are readily removed with DI water, without the need for a saponifier. It is available in Sn62 and Sn63 alloys.
LOCTITE WS 300 RWF BU LOCTITE WS 300 RWF BU is a water wash flux system specially formulated with fine-powder lead-free alloys
LOCTITE X 32-10I Low solids synthetic resin liquid flux that meets global demand for ultra low residue medium activity tacky flux.
LOCTITE X33-08I LOCTITE X33-08I has a balance between soldering performance and on-board reliability; does not have to be a compromise.
Loctite Yellow Weatherstrip Adhesive (Automotive Aftermarket Only) Liquid contact cement for weatherstripping and general purpose bonding
LOCTITE® AA 3301™ Light Cure Adhesive LOCTITE® 3301™ is primarily designed for bonding rigid or flexible PVC to polycarbonate.
Macromelt 6211 Good low temperature and adhesion properties
Macromelt MM Q-5375 Macromelt MM Q-5375 is a moldable polyolefin for demanding moisture and solvent resistance. Excellent adhesion to the most difficult substrates.
Macromelt TPX 16-192B General purpose, high heat polyamide, hot melt
Macromelt TPX 16-206B Long open time polyamide hot melt
Macromelt TPX16-2192 A high melting polyamide hot melt adhesive
Macromelt® OM 652TM
Macroplast SIA 111R2 High strength, thermoset liquid -slow cure (red version)
Macroplast SIA 114 High strength, thermoset liquid - medium cure
Macroplast SIA 115 High strength, thermoset liquid - medium cure
Macroplast UK 178A Two component polyurethane adhesive. Macroplast UK 178A with 178B is a 100% solids, room temperature curing polyurethane compound which cures to a tough, resilient adhesive.
Macroplast UK 178B Two component polyurethane adhesive. Macroplast UK 178A with 178B is a 100% solids, room temperature curing polyurethane compound which cures to a tough, resilient adhesive.
Macroplast UK 180A Two component polyurethane adhesive.
Macroplast UK 180B
Macroplast UK 201A Two component polyurethane adhesive.
Macroplast UK 231 Macroplast® UK 231 ia a 100% solids, room temperature curing polyurethane compound which cures to a tough, resilient adhesive. This product offers an excellent balance of membrane penetration and holdout, resulting in excellent fiber tearing bonds between membranes.
Macroplast UK 413A Urethane filter adhesive.
Macroplast UK 413B Urethane filter adhesive.
Macroplast UR 8224S High strength, thermoset liquid moisture cure adhesive.
Macroplast UR 8225 Slow High strength, thermoset liquid moisture cure
Macroplast UR-8229L High strength, thermoset liquid fast cure
Macroplast UR-8340RD Macroplast UR-8340RD, Red colored, high strength, thermoset liquid moisture cure adhesive for panel lamination.
Macroplast UR-8341 Macroplast UR-8341 is a single component, solvent free, moisture curable, liquid polyurethane adhesive. It cures with water to form a tough, strong, and thermoset polymer.
Macroplast UR-8343 Macroplast UR-8343 is a single component, solvent free, moisture curable, liquid polyurethane adhesive. It cures with water to form a tough, strong, and thermoset polymer.
Macroplast UR-8343RD Macroplast UR-8343RD Red colored, high strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed.
Macroplast UR-8344 Macroplast UR-8344 is a single component, solvent free, moisture curable, liquid polyurethane adhesive. It cures with water to form a tough, strong, and thermoset polymer.
Macroplast UR-8344RD Macroplast UR-8344RD Red colored, high strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed
Macroplast UR-8346RD Macroplast UR-8346RD Red colored, high strength, thermoset liquid moisture cure adhesive for panel lamination. Fast cure speed.
Minico M2000 RS MOD2 Series ACHESON Minico M2000RS MOD2 are a series of one component screen printable resistive carbon inks.
Multan B-524 Multan B-524 A low foam, water soluble, semi-synthetic fluid designed for machining and grinding ferrous and aluminum alloys.
Multan F 329 Metalworking Lubricant A biodegradable, synthetic lubricant. Excellent for use in tube mills or roll-forming lines running ferrous or non-ferrous materials. Particularly suitable for galvanized and zinc-coated steel.
Multan F 738 Synthetic stamping lubricant for medium draws
MULTICORE 309 Flux Cored Wire Solid flux for cored wires: rosin based, fast soldering, pale residues, solders difficult surfaces, good spread on nickel, stainless steel, chromel, monel, constantin, etc., heat stable – low fuming, and mild odour.
MULTICORE Crystal 400 Flux Cored Wire Solid fluxes for cored solder wires have been specially formulated to complement no clean wave and reflow soldering processes.
MULTICORE Crystal 502 Flux Cored Wire Solid fluxes for cored solder wires have been specially formulated to complement no clean wave and reflow soldering processes
Multicore DA100 Solder Paste Multicore DA100 is a flux designed for solder die attach paste applications.
Multicore DA101 Die attach solder paste
MULTICORE HF208 MULTICORE HF208 is a halogen-free, no clean, low voiding Pb-free solder paste. It shows excellent humidity resistance and solderability when reflowed in both air and nitrogen across a wide range of surface finishes including OSP copper.
Multicore Hydro-X Flux Cored Wire MULTICORE Hydro-X cored wire is a high activity, water washable flux with excellent wetting on difficult substrates.
Multicore LF318 No-Clean Solder Paste: Lead-Free Multicore LF318 solder paste is a halide-free, no clean lead free, pin testable solder paste.
Multicore LF318 No-Clean Solder Paste: Lead-Free Multicore LF318 solder paste is a halide-free, no clean lead free, pin testable solder paste.
Multicore LF318M No-Clean Solder Paste: Lead-Free

Multicore LF318M solder paste is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing.

Multicore LF318M No-Clean Solder Paste: Lead-Free (96SC AGS 88.5V)

Multicore LF318M solder paste is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing.

Multicore LF318M No-Clean Solder Paste: Lead-Free (97SC AGS 89V)
Multicore LF318M No-Clean Solder Paste: Lead-Free (97SC AGS 88.5V)

Multicore LF318M solder paste is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing.

Multicore LF328 No-Clean Solder Paste: Lead-Free Ultra Low Voiding Multicore LF328 is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing.
Multicore LF328 No-Clean Solder Paste: Lead-Free Ultra Low Voiding (96SC AGS 88.5) MulticoreLF328 is a halide-free no-clean Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing.
MULTICORE LF328 No-Clean Solder Paste: Lead-Free Ultra Low Voiding (97SC DAP 88.5) MULTICORE LF328 is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing.
MULTICORE LF600 No-Clean Solder Paste: Lead-Free (97SC AGS 88.5V) MULTICORE LF600 is a halide-free, no-clean, solder paste that exhibits excellent thermal stability.
MULTICORE LF721 RWF MULTICORE LF721 RWF is a reworkable tacky flux designed for a wide range of electronics assembly and rework processes. It is recommended for rework processes in conjunction with MULTICORE LF721.
Multicore LF722 Multicore LF722 is a halide-free, no clean, low voiding Pb-free solder paste.
Multicore LF730 Halide-free, no clean, low voiding Pb-free solder paste, which has excellent humidity resistance and a broad process window both for printing and reflow.
MULTICORE LM100 no clean flux solder paste MULTICORE LM100 no clean flux solder paste
MULTICORE MF101 No-Clean Rosin based VOC - Lead-Free Compatiable Low residue, VOC-free, rosin-containing liquid flux, which meets the most demanding legislation on volatile organic compound (VOC) emissions.
MULTICORE MP200 MULTICORE MP200 solder pastes have been formulated as no-clean, Sn/Pb solder paste for high speed printing and reflow in both air and nitrogen. It has been formulated to have increased reflow operating window.
MULTICORE No-Clean Desoldering Wicks A new no-clean desoldering wick designed for static-free desoldering and repair of PC boards without the need for subsequent cleaning.
Multicore Spot-On Multicore Spot-On is a temporary solder resistance designed to be used on printed circuit boards prior to soldering and will withstand fluxing and wave soldering operations.
Multicore TFN600

Tacky flux used in handheld devices

Multicore TFN800HF-BLUE PoP tacky flux
MULTICORE WS300 Water Wash Paste: Lead Free MULTICORE WS300 is a water washable solder paste specially formulated with fine-powder lead-free alloys. It is available with 96sc and 97sc SnAgCu alloys.
Multicore WS300 WS300HV TACKY FLUX Multicore WS300 is a water wash flux system specially formulated with fine-powder lead-free alloys.
P3 2226 Maintenance Cleaner Water-based, general maintenance cleaner
P3 2255 E-Coat Cleaner Cleaner, E-Coat
P3 PolyPrep 2303 Cleaner Phosphate-free alkaline cleaner specially formulated for cleaning of plastic surfaces
Parco Cleaner 472 Single package, phosphate-free, liquid alkaline cleaner
Parco Cleaner 907 Concentrated liquid, non-silicated, alkaline immersion cleaner for steel surfaces
Parco Cleaner ZX-1 Multi-metal alkaline cleaner designed for spray or immersion applications.
Parco Cleaner ZX-4 Non-silicated, heavy duty liquid spray cleaner for ferrous surfaces.
Parco Cleaner ZX-6 Strong multi-metal alkaline cleaner, removes a wide variety of soils.
Parco Spray Wand 330 Parco Spray Wand 330 Nonflammable phosphoric acid, surfactant-based cleaner, brightener and prepaint conditioner for aluminum.
Parcolac 2945
Parcolene 99X Chrome Free, Phosphate Free Post Treatment Chromium and phosphate free post treatment especially formulated for use over all types of conversion coatings.
Primamelt 5646
Purmelt QR 004A
Purmelt QR 5003
Purmelt QR 7799
Purmelt QR-4668 High strength, moisture cure hot melt
Purmelt QR-6208 High strength, fast setting, moisture cure hot melt
Purmelt R-200 UV Purmelt R-200 UV next generation RHMPUR for RV sidewall lamination
Purmelt R-200F+ Next generation RHMPUR for RV sidewall lamination
Purmelt R-508B Designed to give aggressive tack, short to medium open time and high green strength.
Purmelt R-600 High green strength, moisture cure hot melt
Purmelt Series Reactive Hot Melt Urethanes High strength, thermoset moisture cure hot melt
QMI301
QMI® 536UV, QMI® 9500
Rodine 145L Rodine 145L Liquid inhibitor especially designed for the reduction of acid attack on zinc and galvanized surfaces.
Rodine 31A Rodine 31A Liquid, cationic acid inhibitor designed specifically for use in chemical cleaning operations where chloride-free solvents such as citric, hydroxyacetic and formic acids are used.
Rodine 426 Rodine 426 is a low toxicity organic liquid, cationic corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid on iron and steel during industrial cleaning operations.
Rodine 55 Rodine 55 is an amber-colored, powdered inhibitor designed for use in conventional sulfuric acid pickling operations.
Rodine 85 Acid Inhibitor
Sicomet 100 General-purpose, clear, ethyl-grade instant adhesive that provides excellent bond strengths on many materials including plastics1, elastomers, metals and composites.
Sicomet 101 General-purpose, clear, ethyl-grade instant adhesive that provides excellent bond strengths on many materials including plastics1, elastomers, metals and composites.
Sicomet 102 General-purpose, clear, ethyl-grade instant adhesive that provides excellent bond strengths on many materials including plastics1, elastomers, metals and composites.
Silver Anti-Seize, Low Graphite
STYCAST EO2000HV STYCAST EO2000HV one component, oxide-filled epoxy adhesive used in potting.
TECHNOMELT 0437 Formulated for spray application
TECHNOMELT 6009S An amorphous polypropylene, low viscosity, high heat resistant adhesive
TECHNOMELT 740LV An EVA-based, fast setting adhesive that is a lower viscosity version of Hysol 740™ Hot Melt.
TECHNOMELT 8572 Good hot tack, broad temperature range
TECHNOMELT COOLMELT A flexible material applied at low temperatures.
TECHNOMELT PA 7802

Polyamide hot melt is a tough, flexible high performance adhesive with excellent adhesion to many difficult to bond substrates.

TECHNOMELT 0430 Bonding expanded polystyrene, polyethelene, and urethane foams
TECHNOMELT 0450 Formulated for spray applications
TECHNOMELT 232 Medium setting, hot melt adhesive
TECHNOMELT 4046 Highly flexible, 60-second open time EVA hot melt
Technomelt 5621
TECHNOMELT 740 Hot melt is an EVA-based, fast setting adhesive recommended for packaging applications.
Technomelt 80-8309 Flexible hot melt for filters
Technomelt 80-8448 Excellent general purpose EVA hot melt used for filter assembly and in consumer packaging for case and carton sealing.
Technomelt 80-8492 Wire scrim to media for filters
Technomelt 80-8649 Fast setting, medium viscosity hot melt, formulated for general assembly applications
TECHNOMELT AS 4206

General assembly adhesive primarily designed for use in air filter assembly.

TECHNOMELT AS 4222

TECHNOMELT AS 4222 is an assembly adhesive with high temperature creep resistance for the air filter industry.

TECHNOMELT AS 4226 For use with applications that require optical clarity
TECHNOMELT AS 7875 Moldable polyolefin for demanding moisture and solvent resistance. Excellent adhesion to the most difficult substrates. Polyolefin – Excellent Adhesion to Metals, Plastics, Tough Surfaces
TECHNOMELT AS 8361 Heat reactivated hot melt for filters
TECHNOMELT AS 870C This adhesive provides excellent machining at various line speed.
TECHNOMELT AS 871B Hot melt adhesive for textile and structural bonding.
TECHNOMELT AS 8848

Hot melt adhesive specifically designed as a foam-in-place gasket/sealing material.

TECHNOMELT AS 947C Excellent adhesion to carbon/ceramic block and end caps.
TECHNOMELT PA 2157

Polyamide hot melt adhesive.

TECHNOMELT PA 2192B A high melting polyamide hot melt adhesive
TECHNOMELT PA 341 High performance thermoplastic polyamide designed to offer blaze orange color for easy identification of components. It is typically used to encapsulate high voltage modules.
TECHNOMELT PA 6202

Thermoplastic hot melt adhesive based on polyamide.

TECHNOMELT PA 6206 Macromelt 6206 is a moldable polyamide with excellent adhesion to tough substrates.
TECHNOMELT PA 6208 Thermoplastic, hot melt adhesive
TECHNOMELT PA 6208 Black

Low pressure molding.

TECHNOMELT PA 6238

Versatile thermoplastic resin for bonding a variety of substrates.

TECHNOMELT PA 6239

High performance, general purpose polyamide hot melt.

TECHNOMELT PA 6240 Thermoplastic, high performance, hot melt adhesive
TECHNOMELT PA 6300 High melting polyamide adhesive
TECHNOMELT PA 6301 A thermoplastic hot melt adhesive resin
TECHNOMELT PA 633 Moldable polyamide with good adhesion to plastics and a service temperature up to 125°C such as in an automotive firewall
TECHNOMELT PA 638 Moldable polyamide with service temperature up to 125°C such as in an automotive firewall
TECHNOMELT PA 641 Moldable polyamide where strength and hardness are needed such as in memory sticks and computer connectors
TECHNOMELT PA 646 Macromelt OM 646 is a moldable polyamide where strength and increased hardness are needed such as in memory sticks and computer connectors.
TECHNOMELT PA 648

Designed for bonding of cylindrical fitting parts. Cures when confined in the absence of air between close fitting.

TECHNOMELT PA 652

Moldable polyamide where excellent adhesion to plastics and cold temperature flexibility are important such as in an automotive exterior.

TECHNOMELT PA 657 Moldable polyamide where excellent adhesion to plastics and cold temperature flexibility are important such as in an automotive exterior.
TECHNOMELT PA 668 TECHNOMELT PA 668 is a UV-stabilized white molding material that has been engineered to be aesthetically aligned with consumer and industrial product designs.
TECHNOMELT PA 673 Moldable polyamide with good adhesion for higher temperature applications such as in an automotive under-hood
TECHNOMELT PA 678

Moldable polyamide with good adhesion and high temperature resistance for applications such as in an automotive under-hood.

TECHNOMELT PA 682 Moldable polyamide with high temperature resistance for the most demanding high humidity applications such as on the inside of automobile tires.
TECHNOMELT PA 7460 A formulated for spray applications.
TECHNOMELT PA 7804

Tough, elastomeric, high performance adhesive with excellent impact resistance at low temperatures.

TECHNOMELT PA 7804FRM Flame retardant, polyamide, hot melt adhesive
TECHNOMELT PA 7808 Great flexibility offers incredible strain relief on cables and wires. Polyamide – Adhesion to Plastics
TECHNOMELT PA 7808 BLACK Low pressure molding polyamide with good adhesion to plastics.
TECHNOMELT PA 7809FR Modified with fire retardant materials.
TECHNOMELT PA 7811 High performance, polyamide hot melt
TECHNOMELT PA 7833 Moldable polyamide with good adhesion to plastics and a service temperature up to 125°C such as in an automotive firewall
TECHNOMELT PA 7838 BLACK Moldable polyamide with service temperature up to 125°C such as in an automotive firewall
TECHNOMELT PA 7846 BLACK Moldable polyamide where strength and increased hardness are needed such as in memory sticks and computer connectors.
TECHNOMELT PA 7848 BLACK UV stability and suitable for outdoor applications. Polyamide – Increased Hardness
TECHNOMELT PA 7852 Moldable polyamide where excellent adhesion to plastics and cold temperature flexibility are important, such as in an automotive exterior. Also used extensively in white goods.
TECHNOMELT PA 7857 BLACK Moldable polyamide where excellent adhesion and cold temp flexibility are important, such as in an automotive exterior. Also used extensively in white goods. Polyamide – Adhesion to Plastics
TECHNOMELT PA 7873 Moldable polyamide with good adhesion for higher temperature applications, such as in an automotive underhood. Polyamide – High Temperature Resistance
TECHNOMELT PA 7878 BLACK Moldable polyamide with good adhesion for higher temperature applications, such as in an automotive underhood. Polyamide – High Temperature Resistance
TECHNOMELT PA 7901 Low viscosity polyamide
TECHNOMELT PA 9069

High melting thermoplastic hot melt adhesive based on polyamide.

TECHNOMELT PS 713A

Pressure sensitive adhesive with good balance of tack, peel and shear.

TECHNOMELT PS 8668

High viscosity, permanent pressure sensitive hot melt designed for assembly application requiring high peel, shear and heat resistance.

TECHNOMELT PS 8697 A general purpose PSA hot melt designed for use in pre-applied applications.
Technomelt PS 8697 General purpose, pressure sensitive hot melt
TECHNOMELT PUR 3631 Toughened, high strength moisture cure, hot melt adhesive
TECHNOMELT PUR 4511

Reactive Polyurethane Hot Melt

TECHNOMELT PUR 508

Used for lamination and assembly of sandwich panel elements of wood, lauan, fiberboard, particleboard, plywood, FRP, EPS foam, PU foam and surface-treated metals.

TECHNOMELT PUR 513C Industry standard for garage door product. Most economical.
TECHNOMELT PUR 862A

Designed to provide highly aggressive tack, combined with very fast handling strength It is formulated with patented technology to provide fast cure and contains UV dye for improved visibility under ultraviolet source.

Technomelt Q 84-8890
Technomelt Q-5669 Technomelt Q 5669 is a flame-retardant adjusted hot melt adhesive with low smoke level.
TECHNOMELT QUICKPAC

TECHNOMELT QUICKPAC is a high performance, polyamide hot melt

TECHNOMELT SUPERPAC A medium setting material with a 30-second open time.
TECHNOMELT Supra 400 Cool

High quality case/carton sealing and tray forming hot melt designed to apply at 275°F to reduce energy costs.

Terocore 16000 Series Panel reinforcement
Terocore 16100 Series Panel reinforcement
Terocore 16301 Non-magnetic, high strength structural epoxy.
Terocore 20003 Heat-curing, epoxy-based structural adhesive in tape form.
Terocore 20101 Epoxy-based, high-strength structural weld-through tape.
Terocore Series Structural 1 component and 2 component epoxy foams
Terokal 4560 One component solvent free, impact resistant heat curable epoxy based adhesive.
Terokal 5011 Expandable high fracture toughness adhesive for metal bonding
Terokal 5308 Induction curable adhesive for metal bonding
Terolan 1284 Paint shop body sealer
Terolan 1285 Paint shop body sealer
Terolan SA-1185A Paint shop body sealer
Terophon 21000 Series Dry injection/extrusion expandable
Terophon 22000 Series Tacky expandable
Terophon 23000 Series Mastic sealer
Terophon 24000 Series Tacky body shop magnetics
Terophon 40000 Series Series of acoustic foams with a range of pumpable, low mdi acoustical cavity filling foams
TEROSON EP 2300 STRUCTURAL ADHESIVE This one-component, heat-cured, expandable structural adhesive is a low to medium performance product.
TEROSON MS 5510 Adhesive / Sealant Elastomeric adhesive/sealant based on Henkel's proprietary Flextec technology
TEROSON MS 9000 PL HMLC Modified silane (MS) Polymer window glazing adhesive
Teroson MS 930 Teroson MS 930 is a gun-grade, one component sealant based on silane modified polymer, which cures by reaction with moisture to a soft elastic product.
TEROSON MS 930 GY One part humidity moisture curing elastic sealant, silane modified polymer
TEROSON MS 935 BK A one component sealant based on silane modified polymer, which cures by reaction with moisture to a soft elastic product
Teroson MS 9360 Sealant One part humidity moisture curing elastic adhesive, silane modified polymer
TEROSON MS 9371 B WH Used with standard MS products (930, 935, 939, 9360) to create a two component product.
TEROSON MS 9380 WH

A high viscosity, sag-resistant, two component adhesive

TEROSON MS 9382 BK

A high viscosity, sag-resistant, two component adhesive

TEROSON MS 939 BK Designed for elastic seam and joint sealing and bonding and coating of most metals and plastics.
TEROSON MS 939 LTGY High strength, high elongation, color matched, paintable sealant
TEROSON MS 9399 Structural Bonding - MS Polymer, Elastic sealing, Two component rapid cure
TEROSON PU 8597 HMLC NA A one component, moisture curing direct glazing adhesive
TEROSON PU 8599 A one component, moisture curing direct glazing adhesive with excellent sag resistance
TEROSON PU 9096 PL Polyurethane window glazing adhesive
TEROSON PV 06-1272 ANTI-FLUTTER ADHESIVE Weldable, gas resistant, anti-flutter body shop sealer, GM approved.
TEROSON PV 1273 ANTI-FLUTTER ADHESIVE Capable of being applied over oily galvanized and oily cold rolled steel, for application in anti-flutter, spot weld seams, fender, roof bow, body stiffeners and seal hinges, GM approved.
TEROSON PV 1297 ANTI-FLUTTER ADHESIVE An expanding, weld-through semi-structural anti-flutter sealer, GM approved.
TEROSON PV 4000.5 BODY SHOP METAL SEALANT

A cold-applied, pumpable, weld-through sealer.

TEROSON PV 4010.9 AL ANTI-FLUTTER ADHESIVE A cold-applied, pumpable adhesive that is applied between inner and outer panels. Chrysler approved.
TEROSON PV 4010.9 ANTI-FLUTTER ADHESIVE A soft, expandable, non-solvent mastic adhesive. Chrysler approved.
TEROSON PV 4250 BODY SHOP METAL SEALANT Cold-applied, pumpable anti-flutter adhesive / sealant. Chrysler approved.
TEROSON PV 4510 ANTI-FLUTTER ADHESIVE Cold-applied, pumpable adhesive that prevents metal-to-metal contact. Chrysler approved.
TEROSON PV 475.3

A non-expandable, high temperature cure.

TEROSON PV 5802 PVC Underbody Coating

Expandable underbody coating material based on PVC plastisols.

TEROSON PV 5918 ANTI-FLUTTER ADHESIVE Expandable body shop sealer and anti-flutter adhesive, GM approved.
TEROSON RB 3221 AA-01 ANTI-FLUTTER ADHESIVE Expandable body shop sealer and anti-flutter adhesive, Mercedes approved.
TEROSON RB 407D BODY SHOP METAL SEALANT Expandable body shop sealer and anti-flutter adhesive
TEROSON RB 464 ANTI-FLUTTER ADHESIVE Cold-applied, pumpable, weld-through, anti-flutter sealer for use on spot-welded joints to prevent passage of water or dust, Subaru approved.
TEROSON RB 477 ANTI-FLUTTER Heat curing, solvent-free, metal-to-metal mastic adhesive. Anti-flutter. Subaru approved.
TEROSON RB 490 ANTI-FLUTTER ADHESIVE Cold-applied, pumpable, non-PVC, anti-flutter sealer that is applied between inner and outer panels to prevent metal-to-metal contact and to reduce vibration, Honda approved.
TEROSON VR 20 Cleaner Isopropanol-based cleaner
Terostat 10000 Series Pre-formed weld-throughs
Terostat 10100 Series Pre-formed weld-throughs
Terostat 10200 Series Pre-formed weld-throughs
Terostat 11000 Series Tacky paintables
Terostat 12000 Series Dry paintables
Terostat 15000 Series Pre-formed hot melt sealers
Terostat 15100 Series Dry flowable injection molded gauge and drain
Terostat 19000 Series High-strength hot melt sealers
Terostat 27000 Series Fuel resistant expandable
Terostat 28000 Series Roof ditch seams
Terostat 3230-CU-01 Solvent-free, reactive adhesive/sealant, BMW approved
Terostat 450 Cleaner
Terostat 7100 Adhesive / Sealant Elastomeric adhesive / sealant based on Henkel's proprietary Flextec™ technology.
Terostat 7700 Adhesive Elastomeric adhesive based on Henkel's proprietary Flextec™ technology.
Terostat MS 642 Designed for laminating flexible modules on plastic or metal panels
Terostat PT 13000 Series Tacky magnetic paintables
Terotex PTA-184B Lightweight, high performance PVC underbody coating and anti-chip coating
Terotex PTA-188-1 Paint shop underbody/interior coating
TTEROSON PV 4980 ANTI-FLUTTER ADHESIVE A cold-applied, pumpable, weld-through sealer, Mitsubishi approved.
Turco 1270-5 Paint stripper for composite substrates on aircraft
Turco 6871
Turco 6881
Turco Aerowash XTR-1
Turco Aldet A non-silicated, caustic-free, mildly alkaline granular product designed for immersion cleaning applications on aluminum and aluminum alloys without etching the aluminum alloy itself
Turco C NVT A heavy-duty, alkaline cleaner for immersion and barrel cleaning operations.
Turco Liquid Alumigold C An acidic liquid product used to produce a chromate conversion coating on aluminum and all its alloys.
X203 Dry Film Moly Anti-Seize
XCS80091-2 Flexible, general conductive, low stress, low temperature cure, paste adhesive.